Shopping cart frame is formed by the upper frame (1) and the lower frame (2) to store shopping carts (5), where the upper frame (1) and the lower frame (2) are identical, then the front and rear are welded two front uprights (a) and two rear uprights (b) where the length of these uprights (a) and (b) are different front and rear so that the slope of the upper frame provided (1) and forward inclina...

The device for determining a safe distance from the rear axle of the vehicle consists of a radar (2), sensors (2) or camera (2) located at the rear with the broadcast signal (8) and used to monitor and evaluate the traffic situation behind the vehicle, the third brake light (3) located at the rear between the two brake lights (4), the brake lights (4) located in the rear, to visually alert the dri...

Thermo-acoustic, fire protection facing panel is created by connection two layers having different use and material composition. One layer consists of large supporting board, like plasterboard, chipboard, which provides final surface treatment of this panel and also acts as a supporting structure for the second layer. Second layer consists of consistent mixture based on perlite, which acts as a th...

Window and door construction comprising an external window or door frame (1) on or in which is stored frame (2) of the door or window opening wing with insulating glass (3). Insulating glass (3) is on the one of its side equipped with a frame (2) of the door or window opening wing , comprising fastening elements (21) of insulating glass (3), and on the opposite side is insulating glass (3) and ext...

Structural element from rubberconcrete is an ecological plane product using recycled waste tires, replacing part of the original concrete mixture (2). It is produced in concrete forms and to increase the strength can be reinforced by metal reinforcement (3). It is designed as a building block for dealing with noise protection measures for construction of noise barriers at traffic roads, in industr...

Glucan beer containing ?-glucan gel in the rate of beta-glucan gel and beer from 1:500 (v/v) to 1:33 (v/v). Beta-glucan gel is homogenized beta-glucan with water in the rate of 1:99 - 1:9. Beta-glucan gel is added to beer during the production of its, after pilling of beer.

Dietary supplement, wich contains mixture of maximum 99,999975 % by weight of whole freeze-dried fruit of cranberry (Vaccinium macrocarpon) and/or juice thereof, and/or dry juice thereof, and/or extracts thereof and 0,00000025 to 0,0694 % by weight of vitamin D in the form of ergocalciferol D2 or cholecalciferol D3, or mixture of D2/D3, like active principle. The active principle can be mixed unti...

Food supplement based on proteins for animals and/or poultry contains homogenous mixture of 3 - 4 % by weight of solanine, 0,002 - 0,03 % by weigh of steroid aglycol, 20 - 25 % by weight of proteins, 3 - 5 % by weight of calcium hydroxide and remaining within 100 % by weight of water. Also it can containing 2 - 25 % by weight of dolomitic lime and/or 5 - 15 % by weight of dry milk, and/or 1 - 10 %...

Variable playing kit consists of the elements in the form of cubes and prisms, wherein the length shorter sides is half the length of sides the cubes, the cubes and prisms have the sides smooth, coloured, printed, scratched, coated or to depth modified or with holes and the edges of the cubes and prisms rectangular are, shrink or rounded.

The container fermenter for biomass treatment comprises of multi-layered isolation cover (1), watertight and airtight doors for loading and unloading of biomass, and control unit (3) connected to sensors (2) of fermentation parameters placed inside of the fermenter. On the internal walls of the fermenter are placed heating units (6) and on the upper internal wall are placed spraying jets (11) conn...

The dynamic insurance evaluation system (2) is a technical and logical modular hardware and / or a software system that falls within the insurance industry. The technical solution of the system enables automatic control of the process of determining a final price of life and general insurance, depending on the scope and extent of insurance based on dynamically collected and processed data on a cli...

Method and a device for obtaining cleaned synthesis gas from organic substances, especially from biomass and communal wastes, where the gas is generated by gasifying with mediate heating in a reactor (1) jointly with supplementary water (10) with simultaneous using of system of multistage backward retrieval of heat. The obtained raw synthesis gas (12) after its filtration and cooling to the temper...

Foldable container (Fig. 1) at constant handling (loading, unloading, transporting empty containers) in the transport of more means of transport (car, train, plane, ship), particularly in international traffic. The technical solution allows the container to the landing to pass a minimum 1 / 6 height positions, in comparison with the height of an open container at the same base area to store six pi...

Actuator with artificial muscles, which consists of a base plate (1) firmly attached to the two pillars (2), which are firmly attached bearing housings (3). Through them, the insertion shaft (4), which is permanently slipping pulley (7), and at the end of the shaft (4) insertion of the hub (6). He is firmly attached to the arm (5), at the end which is screwed ballast weight (16). Artificial muscle...

Protective bracket is equipped with at least one element of the end to end, where end-element (2) consists of five parts (3'', 4, 5, 8, 9), the first portion (3'') has a square shape, then one edge (6) the first part (3'') follows the second part (4) and the second edge (6) the first part (3'') follows the third part (5), the second part (4) and the third part (5) have triangle, one edge of the se...

The universal stopper for closing a sink, a hand-basin or a bath, which is entirely made of a flexible elastic material and consists of a flexible suction element (1) with a suction side (11). To the suction element (1) is attached a flexible element (2), on which an inner side (21) is formed a conical shape (6).

The melon knife (100), particularly for cutting a pulp, containing a handle (1) with an additional swan-necked flexible blade (2) ending on one side of an edge (3), where the swan-necked flexible blade (2) and the handle (1) are made of durable plastic or metal. The swan-necked flexible blade (2) has a conical shape extending from the edge (3) towards to a back (5) of the blade (2). The edge (3) c...

Formulation for the reduction of losses include as an essential component polymeric terpene, where 100 weight parts of the formulation contains 40 to 90 weight parts of at least one polymeric terpene, 5 to 50 weight parts of vegetable oil, 2 to 14 weight parts of emulsifier and water. As a terpene polymer is poly-1-p-Menthene, vegetable oil includes sunflower, rapeseed, soybean, maize, castor and ...

Formulation for the reduction of losses include as an essential component monoterpene and / or polymeric terpene, and in 100 weight parts of the formulation contain less than 12 weight parts of the polymer isoprene (C5H8) n. Isoprene polymer is cis-1 ,4-polyisoprene, isoprene polymer is a natural rubber or latex obtained from the tree Hevea braziliensis.

Polymer composites based on synthetic polymers and collagen are mainly used in packaging technology, including food packaging. They are suitable for further processing into finished products for packaging technology, blowing film, injection of pans and pots, extrusion and molding. The material is partly to completely biodegradable, depending on the ratio of the components of the mixture.