PROBLEM TO BE SOLVED: To assemble a split case without being interrupted by a tension pulley by providing a locking part which is locked to an intermediate engagement part in an attachable/detachable manner when the tension pulley is pushed at the assembly position by an assembling jig and holds the tension pulley at the assembly position. SOLUTION: An assembling jig 111 is inserted between openin...

PROBLEM TO BE SOLVED: To safely separate a reduction gear from a differential case in a differential unit of a truck or the like by extending a piston shaft in a hydraulic cylinder unit to press the differential case through a screw shaft or the like and separating the differential case from the reduction gear. SOLUTION: In the separating operation, first, a reduction gear and differential case as...

PROBLEM TO BE SOLVED: To provide an expandable bladder having improved mold release characteristics to be used for pressure curing molding machine of a rubber composition such as an inflated rubber tire. SOLUTION: This bladder is a crosslinked elastomer containing an isobutylene rubber-like polymer, and the composition for the bladder contains a corn oil for improving the mold release characterist...

PROBLEM TO BE SOLVED: To brake driving shafts on both sides by providing detecting means for lateral tilt angles, the high speed displacement position of an auxiliary speed change lever and the depressed quantity of lateral brake pedals, and actuating a differential locking device by the actuation of the brake pedal at the time of a set angle or more or at the time of high speed travel. SOLUTION: ...

PROBLEM TO BE SOLVED: To attain operation in an optimum operating range by setting reference rotating speed and a control condition according to the power transmission- cutoff state of an internal combustion engine, setting a control range on the basis of the reference rotating speed, detecting the actual value, and controlling in such a way that the actual value is within the control range. SOLUT...

PROBLEM TO BE SOLVED: To suppress a feeling of slowness and blow-up of an engine at the time of acceleration by enlarging throttle opening by the predetermined quantity in the case of a predetermined lock-up condition being materialized, then reducing the throttle opening into its original state, and driving lock-up mechanism to obtain a complete lock-up state. SOLUTION: When an opening command si...

PROBLEM TO BE SOLVED: To manufacture continuously a self-sustaining bag with a pouring port, made of a synthetic resin composite film, up to a precess of filling the bag with contents. SOLUTION: A film 5 for forming a main body of a self-standing bag and a film 9 for forming a bottom face thereof are fed in a longitudinal direction. A pouring port 7 is heat-sealed to the side of a head part, and t...

PROBLEM TO BE SOLVED: To achieve replacing work of a roll simply by increasing preserving efficiency of rolls to be able to perform movement between the preserving place and a rewinding work site simply, trying effective use of the space inside of a factory, reducing the number of trucks to save the total cost for production/maintenance. SOLUTION: A rewinding truck for long-sized members is provid...

PROBLEM TO BE SOLVED: To provide a rare earth magnet alloy, particularly the alloy, as grain boundary phase alloy, excellent in crusha-bility and minimal in segregation. SOLUTION: The alloy is an alloy, having a composition consisting of, by weight, 35-60% of at least one rare earth element (R) selected from Nb, Dy, and Pr, <=1% B, and the balance Fe, or an alloy having a composition in which at l...

PROBLEM TO BE SOLVED: To maintain rated speed operation after a plant load rapidly reduces by preventing overspeed of steam turbines when deviation from a shaft load is caused, and stabilizing plant operation by a plant load control device by a fuel flow control valve and a steam governing valve when output of a generator rapidly reduces. SOLUTION: Air compressed by a compressor 1 is mixed with fu...

PROBLEM TO BE SOLVED: To stabilize a shaft output command when a combustor is switched, and improve load operability as a combined power generation plant by substantially expanding it to an allowable rate of change set in a change rate restricting unit of the shaft output command in a serial load system. SOLUTION: A difference &sigma between a serial output command A and output A' of a change rat...

PROBLEM TO BE SOLVED: To shorten reaching time to an output target value by preventing reduction in a rising rate of combined power generation system output caused since a gas turbine falls into restriction of an exhaust gas temperature when a load of a combined power generation plant increases. SOLUTION: A bias setting function generator 15 calculates a bias signal &Delta &alpha to enlarge a rate...

PROBLEM TO BE SOLVED: To reduce damage to an apparatus by operating it by avoiding a vibrational resonance point in the case of holding rotating speed in the process of starting and stopping a turbine. SOLUTION: A bias setting circuit 44 is provided to add bias to increase or reduce rotating speed of a rotary shaft in the direction for reducing vibration on the basis of a changing tendency to rota...

PROBLEM TO BE SOLVED: To eliminate sudden brake turning at high speed, perform gentle brake turning, and enhance safety by making high speed travel of traveling devices impossible, and performing only low speed travel when left and right brakes are put in an independent actuation possible one-sided brake condition. SOLUTION: In a vehicle which is provided with left and right traveling devices 4 wh...

PROBLEM TO BE SOLVED: To prevent an output shaft from removing in the axial direction with an easy operation. SOLUTION: This is provided with a transmission mechanism 100 mounted in a case 10 and a rotating shaft (output shaft 130) which is inserted through the case 10 and whose tip is inserted into a center hole of a rotating member (third carrier 164) composing the transmission mechanism 100 and...

An axle driving apparatus wherein a hydraulic motor and a hydraulic pump for a hydro-static-transmission are housed in a transmission casing of the axle driving apparatus and a center section for connecting the hydraulic motor and hydraulic pump is disposed in the transmission casing, the center section being fixed at the butt joint portion at the transmission casing, and an oil passage from the h...

A series of ortheses for the treatment of scoliotic deformities are each adapted for obliquely applying dynamic derotational forces on the thorax and lumbar spine of the user in opposite directions combined with a kyphosing action on the thorax and a lordosing action on the lumbar spine. The orthoses are designed in order that the correcting forces can be applied on the user's trunk with various d...

This invention relates to a kind of superfine microelemental biochemical mixture and its foamed plastic products. The mixture contains titanium oxide, zirconia, silica, yttrium oxide, cerium oxide, tin dioxide, silver phosphate and other microelements, and has certain impact on human body's micro-circulation. The plastic products comprise the mixture according to the invention and base materials w...

Polyurethane, polyisocyanurate and polyurea polymers, particularly foamed polymers can be prepared from formulations including non-silicone polyether surfactants. The non-silicone polyether surfactants can be polyethers having from about 10 to about 90 weight percent oxyethylene units and from about 10 to about 90 weight percent oxyalkylene units having at least 4 carbons. The non-silicone polyeth...

A computer system includes error handling hardware and software that logs the source of application program or system software errors before a reset occurs. Upon a catastrophic error, a retriggerable timer, which is periodically retriggered during normal system operation, instead times out causing a hardware reset. A predetermined time before this retriggerable timer times out, however, the microp...