PROBLEM TO BE SOLVED: To obtain a system which can accurately judge the cause of troubles and speedily handle the trouble within 24 hours by allowing a computer which can properly handle the trouble to automatically analyze the contents of the trouble and display accurate countermeasures. SOLUTION: Inquiry information for a printer 3 is held in a control part 16 and while a service base computer 4...

PROBLEM TO BE SOLVED: To provide a quality judging method capable of judging if a bag- shaped separator is good or bad by automatically detecting the processed condition of the processed bag-shaped separator on the way while carrying it to the next process after the separator is processed to a bag shape. SOLUTION: When a separator 1 processed to a bag shape is carried to the next process by a carr...

PROBLEM TO BE SOLVED: To provide a regenerative braking controller which can keep the energy regeneration efficiency high and can always ensure sufficient braking force. SOLUTION: Generally, when there is a demand on a vehicle to brake, a clutch between an internal combustion engine and members of a drive system is disconnected and a generator connected to the members of a drive system is actuated...

PROBLEM TO BE SOLVED: To increase energy regeneration efficiency to reduce fuel consumption without impairing operability and drivability of a vehicle. SOLUTION: A controller for a vehicle is provided with a generator, which is applied with driving force to be rotated to generate power at speed reduction from a power transmission system, which transmits power to driving wheels and a road state det...

PROBLEM TO BE SOLVED: To prevent changes in rotation or torque, when switching a traveling mode between a series travel mode and a parallel travel mode. SOLUTION: When a travel mode is switched from a series travel mode to a parallel travel mode, a rotating speed Nb of a motor B is detected (S201) and then a rotating speed command is given to a controller of a motor A, to make a rotating speed Na ...

Dans un procédé de séparation d'air, une partie de l'air à une pression intermédiaire se refroidit dans un passage d'un échangeur qui est régénéré par un gaz de l'installation qui peut contenir au moins 50 % d'oxygène.Le reste de l'air à la moyenne pression est soit épuré en dehors de l'échangeur soit envoyé dans un passage qui est épuré de la même manière.

PROBLEM TO BE SOLVED: To reduce photographing cost and to secure safety by arranging a sub image based on composite data on the main image of a display part and recording the image of the state in a recording means. SOLUTION: A changeover switch 5 is turned to a camera mode and construction contents to be photographed are handwritten and inputted to a character input part 3. While viewing the disp...

A system and a process for processing payments and transactions between payers (13) and payees (27, 29, 14, 14a, 13a, 46) associated to the system, using a first server (20) interconnected with telecommunication means (18, 19, 28, 47) with first data storage means (22) containing information on each associated payer (13) consisting of at least an admissible telephone number, at least a authorizati...

It is described a trade and marketing system for trading in an electronic medium, and especially for Internet. The system comprises a data technical infrastructure, algorithms/rules and modules, which together constitute a total system for performing all steps in a trade; from marketing the commercial goods to payment and delivery of the goods. The system creates an international electronic tradin...

PROBLEM TO BE SOLVED: To provide a method and a device for automatically discriminating the correlation so as to consider the correlation between a risk factor in action or an event and its related variable. SOLUTION: The risk evaluation system includes a processor 201 provided with a main processor 202 for receiving inputs from various generation sources and providing outputs through various chan...

An information acquiring device (5) is used for identification of an individual. The information acquiring device (5) provides a choice information among the different choices of configuration. A storage device (6) stores such choice information and the devices (5,6) form a configuration of the interface.;

Ce système d'interface à configuration programmable à choix multiples d'accès par un indi...

Ce système de traitement automatisé comporte une base de données générique (4), dans laquelle sont stockées des informations relatives aux produits et aux services proposés par l'organisme, associée à un système d'interface (5) à configuration programmable à choix multiples, permettant à l'individu d'activer sélectivement en outre des moyens (8) de communication avec l'organisme, des moyens (9)...

A data base (1) stores relative information concerned financial products. An individual validation/modification device (6) is used for determining customer profile type. A portfolio products selection device (8) produces a portfolio index corresponding has this profile. A database search device (8) is provided for combining the financial products of this portfolio, with the help of the relations e...

A generic database (1) stocks financial product information including selection criteria. An individual programmable device (3) is used for selective filtering of the financial products, by validation/inhibition of the criteria of selection of these in the generic database (1) so as to deliver to the individual a selection personalized of the financial products.;

Ce système d'aide à la sélectio...

Ce système comporte une base de données (1) dans laquelle sont stockées au moins des informations d'identification et d'évolution dans le temps, d'au moins un ensemble de valeurs de placement financier (2, 3), contenant la valeur d'entrée, au moins un répertoire pré-établi (4, 5) contenant des informations d'identification d'au moins une valeur de référence sélectionnée parmi les valeurs de l'e...

The roller (24) for guiding and/or tensioning a transmission belt (12) has a corrugated peripheral surface (28,30) in the roller axial direction (A1). The roller is composed of a stack of different diameter circular discs (26A,26B) which are in contact with the belt back smooth surface.

An anti-dust cover driving device for a CD player includes a base body, a laser head base unit mounted on the base body and having a laser head. An anti-dust cover is provided above the base body, moved to hide the laser head or not by a driving device consisting of a gear, a shaft, an activating means, and a power device for rotating the gear and the shaft. The anti-dust cover does not hide the l...

Carcasses (11) in an abattoir are cut in half by a rotating blade (2), which produces a clean cut, without slivers of bone. The blade may be round, hexagonal or star shaped. The arm (3) carrying the blade may also carry a sharpening stone.;

L'invention concerne un dispositif permettant de partager en 2 parties, les carcasses d'animaux de boucherie. Il est constitué d'un couperet octogonal ou he...

Procédé et installation de commutation d'un système d'entraînement comprenant une unité motrice (12), une boîte automatique (22) avec un actionneur (34) et un embrayage automatique (16) avec un actionneur (32). L'embrayage (16) réalise une liaison entre l'unité motrice (12) et la boîte de vitesses(22). Le procédé comprend les étapes suivantes : - on saisit l'initialisation d'une opération de co...

The invention relates to a structure that is machined in a plate of material having a thickness (E), comprising a fixed part (1), a resonator (2), a mechanical device that joins the resonator (2) to the fixed part (1), whereby said mechanical device comprises a first solid moveable part (3) that is joined to one end of the resonator (2), a second solid moveable part (4) that is not joined to the r...