PROBLEM TO BE SOLVED: To control the waste of films and materials to be packaged to the minimum by continuously transferring films, monitoring the pressure for pressing fed to a roll pressing pressure means when the films are heat sealed by a pair of heat sealing rolls and outputting an alarm signal in the case the monitoring pressure is judged to be abnormal. SOLUTION: At least one of vertical an...

PROBLEM TO BE SOLVED: To provide a clothes' tape adhering jig that can adhere a clothes' tape to a door sash at high speed, under a constant pressure, without causing positional displacement. SOLUTION: A clothes' tape adhering jig 1, which is used for adhering a clothes' tape to a door sash with moving it along the door sash, comprises a moving roller holding body 2, a clothes' tape supply body 4,...

PROBLEM TO BE SOLVED: To firmly bond threads blended with nonhot-melt fibers, especially braids, in which solely an axial thread 12 comprises nonhot-melt fibers, by heating them. SOLUTION: This method for bonding braids is to heat melt each cut section of ends 13A, 13B of the axial thread in two braids 11A, 11B by contacting to a heating body 14, pull the molten cut sections apart from the heating...

PROBLEM TO BE SOLVED: To improve responsiveness of differential limit force. SOLUTION: This clutch device includes a main clutch 47 arranged between differential rotary members 19, 29 of a differential mechanism 5, a pilot clutch 49, an armature 51 arranged adjacent to the clutch 49, an electromagnet 53 for operating the movement of the armature 51 to fasten the clutch 49, and a cam 57 adapted to ...

PROBLEM TO BE SOLVED: To miniaturize a differential gear device for a vehicle for smoothing a vehicle turn compared with conventional mechanisms and to facilitate its manufacture by combining spur gears to configure the device. SOLUTION: In this differential gear device, a center support plate 5a of a housing 1 is a revolution arm of a rotational sun planetary gear line, and is rotationally driven...

PROBLEM TO BE SOLVED: To easily disenable differential motion of respective output shafts connected to a differential gear at a low cost, and to easily enable the differential motion again. SOLUTION: This differential motion regulating replacement part 6 wherein a pinion shaft 5 is inserted through a shaft insertion hole 6b is housed in a gear case 1 from which respective side gears and respective...

PROBLEM TO BE SOLVED: To provide a breast pad product wherefrom two pieces of breast pads can be taken out simply without wasting packaging film, and also to provide a manufacturing apparatus that is capable of manufacturing the breast pad products at a low cost. SOLUTION: The structure is constructed of a sticking agent applying part 40 that applies sticking agent to a packaging film sheet 2S in ...

PROCESSO E SISTEMA DE PERFURAçãO DE POçO DIRIGìVEL POR ROTAçãO UTILIZANDO TUBINHO DESLIZANTE Sistema de perfuração dirigível por rotação controlado ativamente para perfuração direcional de poços, o sistema apresentando um componente de acionamento por rotação rotacional no interior de um colar de instrumento deslizante que inclui membros anti-rotacionais elásticos para manutenção de uma relação ac...

ARTIGO ABSORVENTE DESCARTáVEL Expõe-se um artigo absorvente descartável, tal como um chumaço de higiene feminina, e artigo de incontinência de adulto ou uma fralda para bebê, dotado de uma tendência minimizada para criar oclusão de pele negativa que poderá criar super-hidratação da pele ao exibir um baixo Valor de Capacidade de Respiração, quando impactado pela permeabilidade ao vapo...

A bottom valve assembly is provided for a tank car having a top portion, a bottom portion, and a manway disposed in the top portion. The assembly includes a valve seat disposed in the bottom portion of the tank car and defining an outlet opening and a plug moveable between closed and open positions relative to the outlet opening. In the closed position, the plug is disposed against a seat to form ...

A puncture-durable tire structure has a tire body which is covered with an outer radial ply at the inner side thereof. The outer radial ply is made up of an inner layer and an outer layer that are respectively extended over the bead wires at the edges of the tire body and further extended to a middle position of a rubber side wall of the tire body. The inner side of the outer radial ply is in abut...

A machine and method for cleaning an automotive automatic transmission by effecting the discharge of old used fluid from the transmission and the simultaneous replacement of this old fluid with new fluid on an exchange basis. The machine includes a set of primary hoses, a set of intermediate hoses, and a set of plural pairs of complementary adapter fittings which in combination adapt the machine f...

An ankle pouch that can be worn either under one's clothing, or can be worn in conjunction with evening wear or formal wear. The pouch has elastic gathers which snugly hold the pouch in place to one's arm or leg area Another embodiment of the pouch has a water-tight compartment for protecting articles while swimming. Located along the flap, which covers the mouth opening of the pouch, is a translu...

An IC card includes an electronic circuit and a case protecting the electronic circuit, and the case has a through hole. An IC card mounting apparatus for mounting the IC card has a member with a notch at a position exposing the through hole of the IC card when the IC card is mounted. Accordingly, an IC card and an IC card mounting apparatus can be provided which allow reduction in size of the IC ...

A joint mechanism for connection between a sheath and a manipulating section of an endoscopic treatment instrument is provided. A joint includes a leading end portion connected to said sheath, and an expanded base end portion having a first cross sectional shape. A receptacle ring is mounted on an leading end portion of said manipulating section and rotatable within a predetermined angular range r...

Systems and methods supply ablation energy to an electrode in contact with tissue to form a tissue-electrode interface. The system and methods sense, simultaneously with ablation, at least two tissue temperature conditions using at least two tissue temperature sensing elements which are held within a carrier that is substantially isolated from thermal conductive contact with the electrode. The car...

An electrosurgical instrument system including an RF energy source that has two bipolar terminals of opposite polarity and two monopolar terminals, one being active and the other being passive. Switches are provided for selectively energizing the bipolar terminals and the monopolar terminals. The system includes an electrosurgical instrument that has two tissue-contacting members and at least two ...

A method and unit for producing a road vehicle radial tire, whereby an impermeable innerliner (10) is applied to the inner surface of a toroidal tire carcass (3) by placing the innerliner (10) on a substantially cylindrical inner support (13), which is radially deformable to gradually assume a deformed configuration capable of mating with an inner surface of the carcass (3); the inner support (13)...

A segmented core (10) for manufacturing pneumatic tires includes a substantially toroidal core body (11) formed of a plurality of core segments (12) which are arranged in a circumferential direction in tight contact with each other. A sleeve (31) rotatably supporting a first connector member (33) at its one end is inserted into the core body (11) so that the first connector member (33) is engaged ...

A plastic sheet capable of being shaped by a cold room temperature tool, said sheet being a semi-rigid thermoformable plastic foam doped with carbon black having a concentration within a range of 0.0000081 to 0.0081% by weight of the foam. And a method of forming a product from such sheet by heating it to its thermoforming temperature range by infrared (IR) heat and placing and compressing the she...