PROBLEM TO BE SOLVED: To enable the longitudinal width and height of a vehicle body to be made as small as possible, by mounting a case of a hydrostatic non-stage transmission onto a side-wall of a transmission case in a tilted manner with the rear end thereof being located downward, and thus, forming a space under the front part of the case of the hydrostatic non-stage transmission. SOLUTION: A h...

PROBLEM TO BE SOLVED: To reduce engagement shock as it occurs when a clutch is engaged and to prevent clutch durability from being degraded when quick pressure boost control cannot be executed immediately after an engine has been restarted. SOLUTION: When it is determined, through a sequence (S380) of determining whether or not a quick pressure boost control can be executed, that it 'cannot be exe...

PROBLEM TO BE SOLVED: To remarkably improve the positioning accuracy of a material to be packaged, keep the interval of the material to be packaged constant at all times and carry out the good bag manufacturing and packaging process by providing a shutter to be opened and closed freely and also retractable upward on an introduction section of the material to be packaged. SOLUTION: A positioning sh...

PROBLEM TO BE SOLVED: To provide a method for unsealing by tearing from a notch or peeling an unsealing tape without deforming or damaging contents. SOLUTION: A tubular packaging material 1G with a backing member which is to be torn off in a constant width using a sheet which is torn in a predetermined direction as a material is obtained. A composite package 3G receiving contents 2 in the obtained...

PROBLEM TO BE SOLVED: To easily wind a hose and prevent a hose reel from falling and the hose from being soiled by fixing the hose reel to a hose reel fixing frame by hose reel fixtures, and providing a frame connectable to the hose reel fixing frame. SOLUTION: A hose reel is connected to a hose reel fixing frame 1 by fixtures 2. A frame 3 connectable to the hose reel fixing frame 1 is then connec...

PROBLEM TO BE SOLVED: To provide a monitoring device capable of preventing the web break. SOLUTION: This monitoring device is obtained by arranging a light source 9 on the upper side of a wet web 1, directing the luminous surface thereof downward, installing a camera 5a on the operating side and a camera 5b on the driven side on the side opposite to the light source 9 with the wet web 1 placed the...

PROBLEM TO BE SOLVED: To provide a compact transmission capable of shifting between advance and backing smoothly, and stepless transmission, and reducing a gear change shock. SOLUTION: A first split pulley type continuously variable transmission 4 is arranged between an input shaft 10 and a first driven pulley shaft 12 to transmit the power in reverse rotation to a backing transmission shaft 13 fr...

PROBLEM TO BE SOLVED: To eliminate sense of incongruity for braking operation, in order to improve drive feeling by setting a regenerative torque of motor from a brake torque and the possibility of regeneration depending on the braking operation and reducing the drive torque of motor by the regenerative torque portion and corresponding hydraulic pressure of brake. SOLUTION: In brake control, a bra...

PROBLEM TO BE SOLVED: To provide a power plant for a vehicle, with which can start engine can by a small-output motor without spoiling the starting acceleration of the motor, with which a motor running operation can be performed without the drag loss of the engine, with which the engine can be started during the stop of the motor, and which can generate electric power through the use of the engine...

PROBLEM TO BE SOLVED: To provide a power plant for a vehicle, in which an engine can be started by a small-output motor without spoiling a start acceleration, motor running operation can be performed without drag loss of the engine, the engine can be started during an ultralow-speed running operation by a motor capable of hardly starting the engine, and the ultralow-speed running operation can be ...

PROBLEM TO BE SOLVED: To obtain a control device with which a hybrid vehicle is stopped so as to ensure its safety, when abnormalities are generated in the drive system or the control system of the hybrid vehicle, and when normal transmission of a motive force to a drive wheel is difficult. SOLUTION: When an abnormality is generated in an engine control system and an abnormality is generated in a ...

PROBLEM TO BE SOLVED: To obtain a control device with which a hybrid vehicle is stopped so as to ensure its safety, when an abnormality is generated in the drive system or the control system of the hybrid vehicle, and when the normal transmission of a motive force to a drive wheel is difficult. SOLUTION: When abnormality is generated in a motor-A controller system and a battery management system a...

PROBLEM TO BE SOLVED: To obtain a control device with which a hybrid vehicle is stopped so as to ensure safety, when an abnormality is generated in the drive system or the control system of the hybrid vehicle, and when the normal transmission of a motive force to a drive wheel is difficult. SOLUTION: When an abnormality is generated in a battery management system and when an abnormality is generat...

PROBLEM TO BE SOLVED: To obtain a control device with which running operation up to a prescribed destination can be performed safely and surely according to the drive operation of a driver, by limiting the output to a drive wheel, when an abnormality is generated in the drive system or the control system of a hybrid vehicle. SOLUTION: In this hybrid vehicle, the fail-safe operation of the vehicle ...

Patente de modelo de utilidade: ''EXAUSTOR EóLICO PERSONALIZáVEL'', um sistema que permite a renovação do ar em ambientes sem csuto com quaisquer formas de energia e que funciona da seguinte maneira: o vento, ao soprar desloca a aprte maior do equipamento constituído por um ssistema móvel montado sobre uma base girando em um eixo sobre um rolamento (3) que ao ser posicionado pelo vento que circula...

A process for producing yarn, fiber or filament with substantially improved whiteness, reduced yellowness, reduced abrasiveness, reduced static and softer hand includes melt-blending a masterbatch of zinc sulfide and a polyester with a fiber-forming polyester followed by melt-spinning the blend. The invention additionally provides for polyester yarn, fiber, or filament produced by the process.

An improved process is provided for the preparation of siloxane-oxyalkylene and siloxane-alkyl copolymer compositions via a hydrosilation reaction in the presence of high boiling point natural vegetable oils as the reaction solvent. The reaction solvent need not be removed from the block copolymer product, and indeed is beneficial to remain with the copolymer particularly when the copolymer is use...

PCT No. PCT/EP97/01060 Sec. 371 Date Sep. 11, 1998 Sec. 102(e) Date Sep. 11, 1998 PCT Filed Mar. 3, 1997 PCT Pub. No. WO97/34946 PCT Pub. Date Sep. 25, 1997A process for preparing polyurethane rigid foams from polyols and polyisocyanates as well as blowing agents and optionally foam auxiliary agents, characterized in that the polyurethane rigid foam is obtained by reacting A) a polyol component wi...

A lower esophageal sphincter tightening device for treating gastroesophageal reflux disease which includes an insertion device, an energy source, and an energy transmitting device. The insertion device, by insertion through a body opening, positions the energy transmitting device in the proximity of the lower esophageal sphincter. The energy source generates and transmits energy via the insertion ...

A method and apparatus for determining and recovering from a USB micro-controller busy condition, wherein a toggle variable indicative of whether the USB micro-controller is in the busy condition or not is stored in a memory, and a counter is incremented if the toggle variable is set. The counter is checked to determine if the counter has reached a predetermined count, and if so data lines of the ...