PROBLEM TO BE SOLVED: To effectively and continuously separate a multilayer mixture containing an intermediate layer. SOLUTION: This device is provided with a rotary shell 1 and a screw conveyor 2 installed in the rotary shell 1. In this case, the rotary shell 1 is provided with a light liquid layer takeoff port 33 and a heavy liquid layer takeoff port 3, and an intermediate layer takeoff port 19 ...

PROBLEM TO BE SOLVED: To certainly take up an unvulcanized rubber material to which a liner is bonded by a predetermined length. SOLUTION: When the length of an unvulcanized rubber material 1 becomes the length taken up by a taking up reel while a liner 2 is bonded to the rear surface 1a of the unvulcanized rubber material 1, the liner 2 is cut in a state allowed to be spaced apart from the unvulc...

PROBLEM TO BE SOLVED: To realize a differential gear that is able to optionally generate each individual rotation differential in a simple structure. SOLUTION: Supposing that a rotation differential is produced in two drive shafts 3 and 4, if each of clutches 12 and 17 is in a state of being opened, a first input side sun gear 8 and a first output side sun gear 9 both are rotated by rotation and r...

PROBLEM TO BE SOLVED: To secure a vehicle follow-up traveling controller that has reduced the labor of a driver by ensuring any operation during the follow-up control, securing traffic safety, while carrying out a follow-up release as a driver's intention according to a foolow-up release requirement. SOLUTION: A follow-up control means 21 comprises a timer means 22 generating a follow-up release s...

PROBLEM TO BE SOLVED: To secure sufficient negative pressure necessary for operations of a brake booster even if there is a variation in atmospheric pressure, in an internal combustion engine being composed of installing this brake booster. SOLUTION: A fuel injection valve 11 is set up in an inner wall peripheral part of a cylinder heat 4 in and around both first and second inlet valve 6a and 6b o...

PROBLEM TO BE SOLVED: To solve any nonconformity in the case where a suction acting speed is constant, as negative pressure necessary for the operation of a brake booster is securable at need, in this internal combustion engine being composed of installing this brake booster. SOLUTION: A fuel injection valve 11 is set up in an inner wall peripheral part of a cylinder head 4 in and around both firs...

PROBLEM TO BE SOLVED: To prevent nonconformity such as a rich misfire or the like from occurring and to stabilize combusting, condition, in this internal combustion engine which is equipped with a brake booster and can make a stratified combustion. SOLUTION: A fuel injection valve 11 is set up in an inner wall peripheral part of a cylinder head 4 in and around both first and second inlet valves 6a...

PROBLEM TO BE SOLVED: To provide a mounting seat of a converter housing, capable of changing the loading angle of an automatic transmission to a vehicle without deteriorating connecting rigidity between the converter housing and a transmission case without being disturbed by any rib. SOLUTION: A plurality of bolt mounting seat surface parts 11 provided on a mounting flange part 1A of a converter h...

PROBLEM TO BE SOLVED: To generated large torque bias between wheel shafts by providing twisted teeth with first meshing portions of connection gears for generating end thrust in an axial direction toward a support end face, and preventing second meshing portions from generating end thrust in an opposite direction thereto. SOLUTION: A pair of sun gears 15, 17 have twisted teeth twisted in opposite ...

PROBLEM TO BE SOLVED: To generated large torque bias between wheel shafts by providing twisted teeth with first meshing portions of connection gears for generating end thrust in an axial direction toward a support end face, and preventing second meshing portions from generating end thrust in an opposite direction thereto. SOLUTION: A pair of sun gears 15, 17 have twisted teeth twisted in opposite ...

PROBLEM TO BE SOLVED: To suppress the discharge voltage decrease of an lead-acid battery, and suppress the deterioration of life characteristics resulting from the corrosion of grid body ribs by enhancing the collecting performance of the grid body ribs without increasing grid body mass. SOLUTION: The ratio S/M of the apparent surface area S (mm<2> ) of grid body 1 ribs 3 as a collector and the to...

PROBLEM TO BE SOLVED: To prevent active material falling-off so as to extend lead-acid battery life by providing a side band instead of side face main frame in the case of a cast grid on an expanded metal grid in which no main frame effective for active material falling-off prevention is provided on the periphery of an electrode plate grid, its side face is in an open state, and the active materia...

Electronic anti-intrusion warning and protection system for isolated houses, apartment blocks and business premises generally, comprising one or more electronic units, remote transmitting (50), supplied with microtelecameras (51), placed in the internal (10) and external (40) areas to be guarded, whether associated or not to various services such as street lamps (41), light bulbs, street buzzer pa...

The actuating arrangement includes a torque transmitting system that includes a first device for initiating, discontinuing or regulating the transmission of torque. A transmission includes a second device for initiating a gear shifting operation within one of a plurality of gear shifting paths. The transmission further includes a third device for initiating the gear ratio selecting operation among...

A method of producing soft fine metal spheres for semiconductor packaging from a material selected from soft metals and soft alloys. A plurality of fine wires made of the material are arranged in parallel on a flat base plate. Each of the wires has a diameter of not more than 100 mu m. The fine wires are cut into wire chips having an equal mass relative to each other and a chip length/chip diamet...

A hands free hair dryer and holder (10) comprising a portable hair dryer (12). A structure (14) is for supporting the portable hair dryer (12) in a stationary adjustable manner, so that a person (16) can position the portable hair dryer (12) towards the hair (18), so that both hands (20) are free to do other things while drying the hair (18).

A coupling and system for collecting blood or other biological fluids are described. The system includes first and second containers and a coupling for joining the containers. The coupling holds the containers together in two different longitudinal positions both positions preventing contamination. In a first position, the containers are held so that there is no flow between the containers. In a s...

There is now provided a closed cell rigid polyisocyanate based foam blown with a C1-C4 hydrofluorocarbon and formic acid as blowing agents, which possesses a uniform density gradient varying by not more than 10 percent. There is also now provided a polyol composition and a froth foaming mixture having good flow by employing a polyol and formic acid in the presence of a C1-C4 hydrofluorocarbon havi...

A doubly-packaged easily oxidizable article and a process for packaging the article are provided, wherein the deterioration of the easily oxidizable article during heat sterilization or storage is prevented. A hermetically sealed plastic vessel filled with an easily oxidizable article is double-packaged in a flexible packaging bag. The bag is made of a plastic layer having heat-sealing characteris...

PCT No. PCT/US93/03562 Sec. 371 Date Sep. 15, 1995 Sec. 102(e) Date Sep. 15, 1995 PCT Filed Apr. 21, 1993 PCT Pub. No. WO93/22779 PCT Pub. Date Nov. 11, 1993A roll of film consists of polyester film having a film thickness of less than 2 mu m and having a water content of less than 0.06 weight percent, based on the weight of polyester. The roll of polyester film is suitable for vacuum metallizati...