PURPOSE:To improve starting by inhibiting engine control and by reducing the idle running of a driving wheel by performing only engine control based on a brake single control pattern when engine cooling water temp. is lower than the set value. CONSTITUTION:There are provided an engine control unit 6 for performing engine control to reduce engine output, and a brake control unit 7 for performing br...

PROBLEM TO BE SOLVED: To provide a vehicle follow-up control device which can ensure safety during a start or a rush at a road crossing or a railway crossing or intervention of a vehicle. SOLUTION: A vehicle follow-up running control device comprises a vehicle ahead start confirming means 22 for delivering a start confirming signal F from the vehicle ahead during stopping under follow-up control, ...

PROBLEM TO BE SOLVED: To prevent deformation of a clip which is caused by load and the like. SOLUTION: A harness holding part 24 for holding a harness 23 is formed on one end side of a bracket body 21 of a flat plate type. A bracket attaching part for retaining the bracket body 21 is formed on the other end part of the bracket body 21. The bracket attaching part has a bolt hole 22 for screwing and...

PURPOSE: To provide an inexpensive sealed lead-acid battery having no leakage of electrolyte to the outside, and a method for manufacturing a sealed lead-acid battery in which the process for attaching and detaching a temporary covering lid is eliminated, and the residual electrolyte can be easily removed. CONSTITUTION: In a sealed lead-acid battery, a recessed part 9 is formed on a lid 6, an exha...

PROBLEM TO BE SOLVED: To take away load acting upon an intermediate shaft rapidly after the termination of synchronism in order to smoothly engage a sleeve with a hub after the termination of synchronism. SOLUTION: An oil pump 15 is connected to an intermediate shaft 12 of a speed change gear through a clutch 13, and oil in a gear box 18 is sprinkled on a speed change gear 38 of an output shaft 10...

PROBLEM TO BE SOLVED: To improve the cycle service life without damaging the charging efficiency by forming a surface layer of Pb3 O4 and forming a core layer of metal Pb. SOLUTION: A raw material of an active material is formed by using lead powder subject to a ball mill and with the degree of oxidation 20-40%, and baking the powder for 4 hours at a temperature of 200-300 deg.C (lower than the me...

PROBLEM TO BE SOLVED: To minimize the fluctuation in pressure in a coal gasifying furnace even under the large fluctuation in load and improve the coal gasification efficiency by controlling the starting air feed to an oxygen producing device prior to the fuel feed control to a gas turbine combustor and the coal feed control to the coal gasifying furnace. SOLUTION: Coal 1 and oxygen or oxygen load...

PROBLEM TO BE SOLVED: To provide a run controller for a vehicle, which maximizes recovery of regenerative energy by a rear-wheel motor when normal deceleration is conducted, that is during the time when no skid occurs, and suppresses skids of rear wheels, when a skid occurs or its occurrence possibility is high, by providing a regenerative braking means for performing regenerative braking of the r...

PROBLEM TO BE SOLVED: To provide a lead storage battery with long life. SOLUTION: Powder of wood impregnated with phenol derivative such as paracresol, 2-methoxyphenol, 2,6-dimethoxyphenol, or polyphenol compound, is prepared, and the lead storage battery is manufactured by adding above wood powder to a negative electrode, or to the negative electrode and a separator.

PROBLEM TO BE SOLVED: To provide a drive controller for a vehicle suppressing the vehicle from rolling backward and accurately informing a driver of a road gradient. SOLUTION: In this driving force control of the vehicle, when performing drive control of the vehicle applying a driving force to a driving wheel of the vehicle in accordance with a fore and aft acceleration Gxstp during stoppage which...

PROBLEM TO BE SOLVED: To provide a controller for a four wheel drive vehicle driving front and rear wheels with an appropriate driving force distribution ratio coping even with changes of a vehicular state, a driven state of the vehicle, or a road condition for providing a target driving force. SOLUTION: In this controller for a four wheel drive vehicle, to output the target driving force FT (targ...

The object of the present invention is to provide a yarn setting method to the winding tube in the automatic winder and the automatic winder capable of carrying out the setting work of the yarn of the yarn supplying body to the winding tube smoothly and speedily without adding a special device. The automatic winder 1 of the yarn setting method is provided with winding units 2 arranged in a plurali...

The present invention relates to peptides from the three type I repeats of human endothelial cell thrombospondin, which bind to sulfated glycoconjugates including heparin and sulfatide. Such peptides are useful in glycoconjugate binding pharmaceutical compositions and in a method for binding glycoconjugates in a subject.

PROBLEM TO BE SOLVED: To ensure driving power, and improve recovery efficiency of power energy with two motors of relatively small output, and optimize engine and motor control for required driving power from dirigible road wheels. SOLUTION: The sun gear 3a of a planetary gear unit 3 is connected to the output shaft 1a of an engine 1 through a motor 2, a carrier 3b is connected to the input shaft ...

PROBLEM TO BE SOLVED: To ensure driving power and improve recovery efficiency of power energy using two motors of relatively low output, and optimize engine and motor control for required driving power from a dirigible road wheel. SOLUTION: The ring gear 3c of a planetary gear unit 3 is connected to the output shaft 1a of an engine 1 through a motor 2, a motor 4 is linked to a sun gear 3a, and a c...

PROBLEM TO BE SOLVED: To ensure driving power, improve recovery efficiency of power energy with two motors of relatively low output, and optimize engine and motor control according to running conditions. SOLUTION: The ring gear 3c of a planetary gear unit 3 is connected to an engine 1 through a motor 2, a carrier 3b is connected to the input shaft 5a of a belt-type continuously variable transmissi...

PROBLEM TO BE SOLVED: To accomplish assurance of driving force and improvement of recovering efficiency of power energy by two motors having a comparatively low power output, realize optimization of control of an engine and the motors for demanded driving force from drive wheels, reduce mutual an influence of control of the engine and the two motors, simplify its control, and improve control degre...

PROBLEM TO BE SOLVED: To improve energy efficiency, accomplish assurance of driving force and improvement of recovering efficiency of power energy by two motors of comparatively low power output, optimize control of an engine and the two motors for demanded driving force from drive wheels, reduce mutual influence of control of the engine and the motors, simplify its control, and improve control de...

In order to allow slice thicknesses to be set for a twin asymmetric scan in which a scan is performed with a first slice thickness in a first detector row of a multi detector and with a second slice thickness different than the first slice thickness in a second detector row, first, a position of an X-ray beam is moved and a scan is performed while keeping the width of the X-ray beam fixed at twice...