PROBLEM TO BE SOLVED: To provide a 2nd back rest in extremely simple configuration freely attachable and detachable to the existent seat of a vehicle, to apply rigid supporting to a user corresponding to the shape of back of each user, to function the 2nd back rest also as a rigid supporting means for accessories such a finger- pressing instrument and a cushion and to provide the 2nd back rest for...

PROBLEM TO BE SOLVED: To solve trouble such as making appearance adverse, requiring labor for releasing release paper in the case of use and making the release paper into dust although an adhesive tape with the release paper is stuck on the outer surface of the main body of pad for preventing the deviation of the pad and underwear concerning a conventional liquid absorbing pad. SOLUTION: Since a m...

PROBLEM TO BE SOLVED: To improve the purification efficiency of an aeration treatment apparatus to be used for livestock excretion wastewater, lower the installation cost, and consequently prevent environmental pollution. SOLUTION: An aeration tank 1 for organic wastewater is constituted of an outer tank 1 and an aeration pipe 2 installed uprightly in the outer tank 1. The aeration pipe 2 has suct...

PROBLEM TO BE SOLVED: To provide a stainless steel wire for automatic coiling having an excellent lubricating characteristic without environmental pollution. SOLUTION: Nickel(Ni) plating of >=1&mu m to <=5&mu m in thickness is applied to the stainless steel wire 1, further an inorganic salt coating film 3 mainly composing of at least one kind of potassium sulfate of borax (borate) and containing n...

PROBLEM TO BE SOLVED: To improve peeling strength of a fitting to a frame main body. SOLUTION: A rod-like fitting 12 with fitting ends 12a on each terminal is formed by providing stoppers 12b with a non-circular crosssection on its intermediate part. In addition, by integral molding with a frame main body 14 accompanied with compression of a synthetic resin material around the fitting 12, the fitt...

PROBLEM TO BE SOLVED: To provide a diagnosis function and a maintenance function to a printing head of high speed printer, by providing on a printing head a capturing structure having an investment cast body, and means capable of first receiving ink from the printing head and then returning the ink back to the printing head. SOLUTION: A capturing structure 34 is attached to a printing head through...

PROBLEM TO BE SOLVED: To improve the corrosion resistance of aluminum refrigerant piping near a clamp section in a piping clamp structure holding and fixing the aluminum refrigerant pipes on the lower side of the floor panel of a car room with resin clamps having an opening section on the upper side. SOLUTION: A tape-like sacrifice corrosion member 14 is wound and fixed at the portions held by res...

PROBLEM TO BE SOLVED: To enable an effective space for a cargo platform to be secured in such a state as having a seat stored in seat storing part, as well as securing an effective space below a seat part. SOLUTION: Such components are provided as a bracket 34 fixed to a sealing part 24, a storing part 38 provided on a side lining 36 inside of a cabin 14 and a support member 40 arranged in this st...

PROBLEM TO BE SOLVED: To quickly escape or rescue a parson from between an inter panel and a seat cushion at the time of a head-on collision, by providing a seat slide adjusting device to release the locked condition of the seat cushion by a lock releasing device via a seat slide adjusting device by the deformation of the inter panel at the time of a head-on collision. SOLUTION: A housing 47 is fi...

PROBLEM TO BE SOLVED: To quickly escape or rescue a person from between a steering wheel or an inner panel and a sheet back at the time of a head-on collision, by operating a lock releasing device by the change of the fitting angle of a seat cushion based on vehicle deformation at the time of the head-on collision. SOLUTION: A return spring 27 is bridged between the tip side of a direction changin...

PROBLEM TO BE SOLVED: To more effectively reduce a load on a crew neck part of the time of rear end collision. SOLUTION: An energy absorbing cassette 40 is arranged in a part position, facing to the barrel part and breast part of a seat bag 14. And an energy absorber 46 is arranged also in a preset position of a headrest 16. And by making relative adjustment of the rebound characteristics of these...

PROBLEM TO BE SOLVED: To easily assemble structure safe to a shock from the rear, by providing a headrest on the upper part of a seat back part frame, to fix a shocking means, provided between side surface members of a lower part, to an upper part, and to make the upper part, the head rest and the shocking means rotatable forward and rearward respectively by a rotary hinge. SOLUTION: Side surface ...

PROBLEM TO BE SOLVED: To mount a seat cover on the seat back of an automobile seat with a built-in side air bag for meeting requirements of relieving the set back from a stain and damage and for holding the side air bag between an occupant and a side door when strong shock is applied from both sides of a car body, so that the primary purpose of the side air bag can be achieved. SOLUTION: Cut lines...

PROBLEM TO BE SOLVED: To obtain an aqueous composition stable without being concerned with the temperature change, capable of maintaining high fluidity for a long time, manifesting a sufficient strength after being hardened and having good operability by using a mixture of an &alpha -hemihydrate gypsum with a cement as a substrate, and blending a fluidizing agent, a retarder and an accelerator wit...

PROBLEM TO BE SOLVED: To obtain both an aluminous cement composition excellent in mechanical strength, corrosion resistance and toughness as a binder and a casting refractory excellent in corrosion resistance and peeling resistance by using the composition. SOLUTION: This aluminous cement composition comprises (a) 10-30 pts.wt. of a calcium aluminate linker mineral composed of >=90wt.% of particle...

PROBLEM TO BE SOLVED: To solve troubles such as costs, laborsaving, efficiency, use, etc., on processing wastes such as burning or making compost from food waste processor. SOLUTION: The waste 1 obtained by forming wet refuse, wood chip, etc., into scrap, granule, powder, etc., and a ceramic base material 2 such as clay, etc., are mixed to paste or slurry state, then molded into desired form, bake...

PROBLEM TO BE SOLVED: To obtain a high performance preliminary polymerized solid catalyst and to provide a method for preparing the preliminary polymerized solid catalyst and a heterogeneous polymerization system capable of stably performing the heterogeneous polymerization of an olefin. SOLUTION: This preliminary polymerized solid catalyst is prepared by polymerizing an olefin under the irradiati...

PROBLEM TO BE SOLVED: To obtain a novel photostimulable phosphor which contains a trivalent matal (e.g. Ba, Sr, and alkali metal, an alkaline earth metal, or a lanthanoid) and a halogen in a specified ratio and exhibits both a high x-ray absorption and a strong light emission due to photostimulation. SOLUTION: This novel phosphor is a storage phosphor which emits fluorescence by photostimilation a...

PROBLEM TO BE SOLVED: To heighten sound absorption effect, use in outdoor setting for a long time and easily perform execution by setting sound absorption material between the face material of porous structure at the side of a sound absorption face and the face material of non-porous structure at the opposite side, and vertically arranging sound absorption panels arraying the fiber laminated layer...

PROBLEM TO BE SOLVED: To improve the effect of preventing cracking at the time of floor construction, cut curing time and reduce cost by solidifying a self-leveling material containing water, a defoaming agent and a specified amount of a rubber latex from the substrate side or inside by heating with a heat medium. SOLUTION: A self-leveling water composition 3 is obtained by adding water and a defo...