PURPOSE: To set a slice thickness for twin asymmetrical scanning by setting a first slice at a first detector string and setting a second slice whose thickness is different from the first slice thickness at a second detector string in a multi- detector. CONSTITUTION: This device moves the position of an X-ray beam and scans by using an X-ray beam width fixed to be double of a first slice thickness...

PURPOSE: To provide a parking mechanism for vehicular belt-drive continuously variable transmissions that can reduce moment exerted on a sprag support portion and thus ensure sufficient strength thereof, via a juxtaposition thereof to a parking gear. CONSTITUTION: A sprag 33 for locking a parking gear 31 is journalled on a support portion 32, which is positioned on the periphery of a housing membe...

PURPOSE:To secure both cooling and soundproofing effects and reduce the number of part items as well as to facilitate a job for assembly operation by partitioning off an inlet and an outlet with a cushioning material and forming both inlet and outlet ducts for cooling air in space between a transmission case and a case cover. CONSTITUTION:Cushioning materials 60-63 are installed in the inner part ...

PROBLEM TO BE SOLVED: To reliably prevent wrong operation at the start of an electric vehicle or the like by providing a shift lock control means for releasing a shift lock from a non-driving range to a driving range of a shift device when the operation of an ignition key to a start position is detected. SOLUTION: When an ignition key is turned on and the signal of the ignition switch 35 is input ...

PURPOSE:To connect another output element inserted in the interior of an output element to a carrier simply and firmly in a combination planetary gear type center differential unit. CONSTITUTION:In a combination planetary gear type center differential unit 50, a reduction gear 17 for always transmitting power to front wheels is fixed to a carrier 55. The second intermediate shaft 24 for transmitti...

PROBLEM TO BE SOLVED: To realize this compensation even when torque-down to compensate for a shortage of lockup capacity is not allowed at shift-up time to gradually change a gear ratio. SOLUTION: In (42), when judged as a continuously variable shift, in (43) a delay time constant T of the target gear ratio is found by multiplication of a basic time constant T0 , a throttle factor K1 and a vehicle...

A bead lock apparatus incorporating in a tire building apparatus and a method of locking a bead ring (4) by using the bead lock apparatus for transferring a bead ring from a bead setter (5) engaging the inner circumferential surface of the bead ring to the tire building apparatus at a predetermined position thereon. The bead lock apparatus includes a plurality of first bead lock segments (6) posit...

SE TRATA DE UN DISPOSITIVO PARA SEPARAR COMPONENTES DE LA SANGRE TALES COMO MONOMEROS DE FIBRINA POR CENTRIFUGACION ALREDEDOR DE UN EJE CENTRAL, CON UNA PRIMERA CAMARA ANULAR (70) DEFINIDA POR UNA PARED EXTERIOR CILINDRICA (72) Y OTRA INTERIOR (71) TAMBIEN CILINDRICA, ACOMODADAS AMBAS CONCENTRICAMENTE ALREDEDOR DEL EJE DE ROTACION, Y POR UNAS PAREDES EN LAS PARTES SUPERIOR (73) E INFERIOR (74); ES...

SE HA CONSEGUIDO LA MANUFACTURACION DE UNA HOJA FILTRADORA (B) A BAJO COSTO Y EN UN PERIODO CORTO DE TIEMPO, Y SE HA ACORTADO EL PERIODO DE MANUFACTURACION OBTENIENDOSE UNA REDUCCION EN EL COSTE DE UN MOLDE DE VULCANIZACION DE NEUMATICOS (M). EL MATERIAL DE ALAMBRE DE METAL (1) SE EXPONE A UN PROCESO DE LAMINADO Y MOLDEADO, Y SUBSECUENTEMENTE SE EXPONE A UN TRATAMIENTO POR CALOR PARA FORMAR UN MAT...

PURPOSE:To obtain a manufacture of magnetron negative electrode structure, which is provided with a getter having high reliability and a long lifetime. CONSTITUTION:At the time of drying paste material, which includes a getter material and which is spread on the surface of an upper side shield, high frequency current is allowed to flow on a metal conductor arranged close to the upper end shield, a...

PURPOSE:To shorten the sticking time and decrease the defective generation rate and to improve the productivity and production efficiency by sticking plural counter substrates at a time by using a pallet for substrate arrangement. CONSTITUTION:The pallet 1 for substrate arrangement is constituted by forming hollow parts, which are thinner than counter substrates 2 so that the upper pressed surface...

PURPOSE:To provide a new compound useful as a hole-transportation material for organic thin-film EL element and organic thin film photocell and as a carrier transportation material for electrophotography. CONSTITUTION:The compound of formula (R is H or methyl). It can be produced by reacting N,N'-diphenylbenzidine or N,N'-ditolylbenzidine with iodoanisole in the presence of copper powder, copper o...

PROBLEM TO BE SOLVED: To predict the generation of significant failure, and to reduce communication amounts by reporting a generation history within a prescribed time in the case of a problem in which the number of times of the generation of a certain event is significant. SOLUTION: A failure monitoring function 1 always monitors a device 10 to be monitored, and communication failure to a communic...

EN UN PROCEDIMIENTO PARA DISMINUIR EL CONTENIDO EN AMINAS PRIMARIAS EN UNA COMPOSICION QUE CONTIENE AL MENOS UN POLIOL, ESTA SUSTITUIDA AL MENOS POR UN ISOCIANATO, ESTE ISOCIANATO TIENE SOLO GRUPOS ISOCIANATO SECUNDARIOS Y/O TERCIARIOS UNIDOS ALIFATICAMENTE, SE AÑADE ISOCIANATO EN UNA CANTIDAD DE HASTA 5 % EN PESO, EN RELACION A LA COMPOSICION TOTAL, Y SE OBTIENE UNA PREPARACION DE POLIOL.; A meth...

UN APARATO DE EXTRACCION DE FLUIDO COMPRENDE UN PASO (20) PARA EL FLUJO BOMBEADO DE UN PRIMER FLUIDO, POR EJEMPLO AIRE, A TRAVES DEL MISMO. UN DISPOSITIVO DE CONTROL DEL AREA DEL FLUJO DE FLUIDO EN FORMA DE UN TAPON (22) CON ABERTURA ESTA PRESENTE EN EL PASO. UNA ENTRADA (26) AL PASO (20) ESTA PREVISTA EN O AGUAS ABAJO DEL LADO DE AGUAS ABAJO DEL TAPON (22). CUANDO, EN USO EL PRIMER FLUIDO ES BOMB...

A user input device, e.g., a wireless keyboard, for providing user inputs to a receiver unit via a communications medium intermittently transmits diagnostic messages in the communications medium such that a diagnostic message is transmitted after a predetermined interval following transmission of a preceding diagnostic message has expired. A receiver unit is responsive to the communications medium...

The invention relates to a method for granulation of a molten material consisting of liquid slag, liquid metal or a mixture thereof. The characteristic features are that there is established a stream of molten material in the form of a curtain (13), which is caused to fall downwards by the gravitation, said curtain being at least five times as wide as it is thick, that said stream of molten materi...

The invention relates to a method for granulation of a molten material consisting of liquid slag, liquid metal or a mixture thereof. The characteristic features are that there is established a stream of molten material in the form of a curtain (13), which is caused to fall downwards by the gravitation, said curtain being at least five times as wide as it is thick, that said stream of molten materi...

PURPOSE: A driver is provided to enhance stability for a feedback control system of an oscillator to control highly precisely a drive system of a piezoelectric oscillator. CONSTITUTION: Two current outputs are converted into voltage outputs by I/V converters, and further converted into digital outputs D1 and D2 by binarizing circuits. The outputs are added by an adder in a phase shifter(31), and c...

PURPOSE: A flat display apparatus is provided to enhance high definition and high density display in a flat display apparatus, and to reduce driving power, that is, consumed power. CONSTITUTION: A first and second substrates(1, 2) are positioned opposite to each other. The first substrate(1) is provided with a discharge maintaining electrode group(5) having a plurality of discharge maintaining ele...