PROBLEM TO BE SOLVED: To three-dimensionally radiograph an image of an object in a simple constitution or to obtain three-dimensional information.

SOLUTION: The subject apparatus is provided with an X-ray tube 11, a compression plate 12 to compress the object, a compression plate moving section 22 which displaces the compression plate 12 in the X direction, and a sensor part 14 two-dimensio...

PROBLEM TO BE SOLVED: To provide a method of manufacturing an encapsulated micro electro-mechanical system (MEMS) which causes little metallic fatigue and stress.

SOLUTION: The MEMS manufacturing method includes steps for forming a dielectric layer 204, patterning the upper surface of the first dielectric layer 204 to form a trench, forming a release material 212 in the trench, patterning t...

PROBLEM TO BE SOLVED: To suck a material having tackiness like the intermediate material of a tire to immediately release the same at a release position.

SOLUTION: A large number of vacuum suction ports 122 communicating with a vacuum duct are provided to the suction surface 120 of a sucking feed device in the underside region of the vacuum duct, and a plurality of press-down pins 152 and a...

PROBLEM TO BE SOLVED: To provide a vehicle control device capable of realizing the damping of a vehicle body in the optimum state.

SOLUTION: The input command is corrected to inhibit the vibration of the vehicle body by using the motion model as the dynamic model of the vibration of a tire of a vehicle, the vibration under a vehicle body spring in a suspension, and the vibration on the vehi...

PROBLEM TO BE SOLVED: To improve the safety by preventing car speed from being kept in a variable state even when a gradient is changed in controlling the driving force to achieve a target acceleration, and preventing the sudden acceleration under bad weather.

SOLUTION: Whether the acceleration with a target acceleration tACC1 of tACC1 ≥ 0 or the deceleration of tCCC1 < 0 is checked in S41....

PROBLEM TO BE SOLVED: To prevent the occurrence of belt slipping in a continuously variable transmission.

SOLUTION: This driving device of a hybrid vehicle comprises a connection gear first support bearing 54 receiving a component in the radial direction, of motor torque, and a connection gear second support bearing 57 and a connection gear third support bearing 59 receiving a component in ...

PROBLEM TO BE SOLVED: To provide an optical glass having optical constants of <500°C deformation point (At), a refractive index of 1.60-1.64, an Abbe's number (νd) of 58-64 and high weather resistance.

SOLUTION: The optical glass has a composition range of 37-45% P2O5, 0.5-5% B2O3, 1-4% Al2O3, 1-4% Li2O, 0-2% Na2O, 0-2%...

PROBLEM TO BE SOLVED: To provide a shoe press and press device for a paper-making machine, stabilizing the conveyance of wet paper by absorbing and holding the wet paper at a discharging side of a nip of the shoe press for the paper-making machine to realize a high speed operation of the paper-making machine while suppressing a re-wetting phenomenon and reducing an equipment cost as well.

S...

PROBLEM TO BE SOLVED: To realize an installation on a vehicle having a narrow width and to flexibly cope even with the case that the input shaft of a hydraulic stepless speed changer and the output shaft of a transmission are disposed in the directions in a parallel or perpendicular positional relationship.

SOLUTION: The lateral size of the transmission with the hydraulic stepless speed cha...

PROBLEM TO BE SOLVED: To prevent a driver from feeling incongruous due to generation of shock when fuel-cut is released and fuel supply is restarted at the time of increasing an engine rotation speed based on the torque capacity of a low-speed side friction engaging device with a coast down shift.

SOLUTION: The coast down shift is output (time t1) in a state where the fuel-cut is O...

PROBLEM TO BE SOLVED: To provide an actuator device capable of coping with various requests.

SOLUTION: A worm 13 transmits a rotational motion to a first speed reduction gear 14. The first speed reduction gear 14 transmits the rotational motion to a second speed reduction gear 15. The second speed reduction gear 15 transmits the rotational motion to a third speed reduction gear 16. A female...

PROBLEM TO BE SOLVED: To prevent an erroneous lighting due to a strong discharge accidentally generated by stably generating a weak discharge in ramp in a plasma display panel.

SOLUTION: In the method for driving a plasma display panel, the plasma display panel is provided with a first substrate on which a first electrode and a second electrode disposed in parallel with the first electrode ...

PROBLEM TO BE SOLVED: To provide a frame memory accessing method, in which the time required for writing of a frame is not restricted by a time required for reading of the frame.

SOLUTION: Image data are divided into image data at each gradation, and at writing, the image data are written to a frame memory, in response to a writing horizontal synchronous signal 101 as time series image data...

PROBLEM TO BE SOLVED: To provide a lead-acid battery which is excellent in charging efficiency, prevents negative electrode sulfation, and has long service life even when the lead-acid battery is used in an imperfect charged state.

SOLUTION: The lead-acid battery comprises a negative electrode plate containing a compound in which a benzene ring couples with a sulfonic acid group (-SO3

PROBLEM TO BE SOLVED: To provide a manufacturing method of a lead-acid battery in which a storage period is extended and the corrosion of a positive electrode grating or core metal is suppressed even if stored for a long term, and which has a stable life-time performance in the manufacturing method of the lead-acid battery of a quick service type and a wet type wherein a method of draining liqu...

An automatic speed control device for a vehicle includes a distance measuring sensor (3), a vehicle speed sensor (5) and a control unit (9) for controlling the vehicle speed. In the control unit (9), a target speed determining section (11) determines a target speed corresponding to a distance detected by the distance measuring sensor (3) and the vehicle speed detected by the vehicle speed sensor (...

A packaging unit (1) for continuously producing aseptic sealed packages (2), containing a pourable food product, from a tube (14) of packaging material filled with the food product; the unit (1) has a first and second chain conveyor (10, 11) respectively having a number of jaws (12) and a number of counter-jaws (13), which interact with and grip the tube (14) to heat-seal cross sections of the tub...

A packaging unit (1) for continuously producing aseptic sealed packages (2), containing a pourable food product, from a tube (14) of packaging material filled with the food product and fed along a vertical supply path (A); the unit (1) has a first and second chain conveyor (10, 11) respectively having a number of jaws (12) and a number of counter-jaws (13), which interact with the tube (14) to gri...

Die Erfindung betrifft beschichtete Gläser sowie ein Verfahren zu deren Herstellung.; Production of a surface-coated glass body involves (a) cleaning and/or coating the glass with a primer/cleanser; (b) applying an isocyanate-hardening polyacrylate lacquer containing mineral particles to a thickness at least10 mu; and (c) hardening the coating. An Independent claim is also included for the coat...

Es wird ein patrizenförmiges Werkzeug einer Reifenvulkanisationsform zur Ausbildung eines Lochs in einem Profilblock eines Laufstreifens eines Fahrzeugreifens, mit einem hinteren Ende zum Einsatz in die Reifenvulkanisationsform und mit einem vorderen Ende zur Ausbildung des Lochs im Profilklotz, wobei das vordere Ende aus Schaft und Kopf besteht, offenbart. Erfindungsgemäß zeichnet sich das Werkze...