mechanical engineering; food, chemical and other industries; packing of loose materials in polymeric film. SUBSTANCE: automatic packer has hose shaper, filling mandrel, longitudinal seam maker, cross-cutting mechanism and transport mechanism provided with independent drive. Heads of longitudinal seam maker are connected with lead screws through two pairs of threaded bushings with corresponding thr...

oil and gas industry. SUBSTANCE: proposed method can be used in gas-lifting operation of wells fitted with installations of plunger lift. Well is brought to stop, pipe and hole clearances communicate with well-head. Level of fluid is reduced by value permissible for condition of creation of maximum depression in pool. Face and well-head pressures in pipe and hole clearances are recorded. Curve of ...

geophysical borehole measurements, specifically, determination of spatial position of axis of cased boreholes. SUBSTANCE: pickups measuring clearances between body of down-hole logging instrument and wall of borehole are mounted on head and lug of down-hole logging instrument to reduce errors of measurement of zenith angle and azimuth of plane of inclination of borehole caused by angular motions o...

wind-power engineering; windmills operating at constant speed of windwheel. SUBSTANCE: windmill has carrying shaft, wheel with hub mounted on shaft, blades secured on wheel and power governor. According to invention, carrying shaft is connected with hub by means of movable joint. Shafts of turnable blades are mechanically connected to each other and to carrying shaft by means of traction plate sec...

commercial activity means used to pay for various commodities and services. SUBSTANCE: proposed system can be used to pay for various commodities and services using Global Internet through general agents to ensure confidentiality of users' accounts and other private pieces of information unambiguously identifying the user in real-time purchasing of commodities and services. Access to pay-services ...

There is claimed an asynchronous generator (fig.1) comprising rotor (1) and stator (2) on which multiple of 2m1m2 teeth (3-20) and a definite number of coils (21) are arranged, the coils belonging to the primary (22) and secondary (23) windings with phase number m1 and m2, correspondingly. The asynchronous generator offered is characterized in that coils of secondary winding, similarly as the coil...

PROBLEM TO BE SOLVED: To obtain a sealed lead storage battery suppressing overflow of solution when pouring it without losing output characteristic per unit volume of the battery and is equipped with a safety valve configuration without lowering pouring speed of the solution. SOLUTION: Inner shelf 8 of the battery has a through hole 9 that permits interior of the battery communicates with the exte...

PROBLEM TO BE SOLVED: To enhance durability of terminal portion against repetitive tightening at terminals of a lead storage battery having tightening portion with bolts. SOLUTION: In a terminal portion of a lead storage battery with a fastening bolt 6, a terminal member 5 made of a lead alloy has a through hole 7 through which the bolt 6 is inserted, an adhesive 8 to seal a pole 3 and a lid 4 per...

PROBLEM TO BE SOLVED: To provide a lead accumulator having a stable deep discharge service life by using a rolled lead alloy sheet for the lattice body of the lead accumulator made by rolling a rolled lead alloy tape containing Sb in one body with an alloy sheet of Pb-Ca-Sn. SOLUTION: In the manufacturing method of a rolled alloy sheet for a lattice body of a lead accumulator where an alloy sheet ...

PROBLEM TO BE SOLVED: To provide a lattice board where a paste of active substance pressurized on an upper surface of the lattice board is prevented from bulging out of or peeling from the lattice board, when the paste of active substance is pressurized using a press roller after it has been filled in the lattice board. SOLUTION: A lattice board 1 is equipped with a projected strip 2 and a project...

PROBLEM TO BE SOLVED: To prevent noise currents from flowing through an electronic circuit connected to an antenna device having an antenna and a filter part. SOLUTION: In this antenna device 10, an antenna 16 formed on the outer surface of a dielectric substrate 14 is short-circuited with an input edge side resonance electrode 32 of a filter part 18 formed inside the dielectric substrate 14, and ...

PROBLEM TO BE SOLVED: To provide the controller for a vehicle which can practice the load limitation of a motor generator, so as to be suitable for the vehicle and make the vehicle properly exhibit its function. SOLUTION: When an RMG 70 is made to function as a motor and the RMG 70 is made to function as a generator, since the load limit factors klmmin and klmminrg of the RMG 70 are determined by ...

PROBLEM TO BE SOLVED: To improve fuel efficiency of a hybrid vehicle which drives a generator to rotate to charge a battery, when it travels with an engine as a power source and obtain a sufficient driving force, when a driver requests the increase of the driving force by its controller. SOLUTION: When a battery is charged, an engine revolution Ne is changed from a driving point a to a driving poi...

PROBLEM TO BE SOLVED: To provide the controller for a hybrid vehicle which does not impair the durability of a transmission belt. SOLUTION: When an engine 14 which is judged to be in a cool state by a cool state judging means 130 is started, an MG 16 is turned in a state that a ring gear is fixed with a brake B1 by a start control means 136 to start the engine 14 without using a starter motor 86. ...

PROBLEM TO BE SOLVED: To charge a battery having high efficiency by separating an engine, without causing inviting degradation in the re-start performance of the engine and prevent necessary oil pressure from being excessive, when a velocity is changed by a belt-type stepless speed change device. SOLUTION: When a motor-generator 16 is subjected to regenerative control, while a vehicle is traveling...

PROBLEM TO BE SOLVED: To realize more proper control for transferring a travel mode from a motor travel mode to an engine travel mode. SOLUTION: When a travel mode is transferred from a motor travel mode, where a clutch C1 is connected and a motor generator 16 only is used as a power source to an engine travel mode (direct coupled mode), where an engine 14 is started and a clutch C2 is connected, ...

PROBLEM TO BE SOLVED: To provide a differential mechanism capable of stably being supported with a simple structure in a transmission case, satisfactorily transmitting a rotation of a rotation shaft, and allowing efficient and easy maintenance work of the rotation shaft or an axle. SOLUTION: In this differential mechanism 3, a pair of facing pinion gears 32 are journalled via a pin shaft 31 in a p...

PROBLEM TO BE SOLVED: To provide a stable operation and a sufficient connection torque and to structure a light and compact device using this. SOLUTION: This clutch mechanism comprises rotation members 5, 53 respectively having large diameter portions 41, 83 and small diameter portions 19, 59, many radial holes 67 provided in a rotation member 5, connection members 71 movably stored in the radial ...

PROBLEM TO BE SOLVED: To provide a mission case of a combine with mission case pieces hardly separable from each other by an external force. SOLUTION: This mission case 7 for gear-changing a driving force from an engine side is structured by adhering a plurality of mission case pieces 16 to each other from right and left, the mission case pieces 16a, 16b on the right and left ends are interconnect...

PROBLEM TO BE SOLVED: To necessarily and sufficiently support lubricating oil for a friction- engaging device selectively slip-controlled and to prevent power loss due to unnecessary circulation of the lubricating oil. SOLUTION: This hydraulic control device of an automatic transmission can have a transmission state set by transferring a predetermined friction- engaging device B1 into a sliding st...