FIELD: light industry, in particular, production of domestic and artistic articles, such as decorations, casings for domestic things, books etc. ^ SUBSTANCE: method involves wetting blank with hot water; using soap-based gel as acid-free medium; performing manual fulling process by whipping-in of gel into blank wool material with resultant foam formation. ^ EFFECT: wider range of decorative and do...

FIELD: oil extractive industry. ^ SUBSTANCE: method includes control of changes of forces in point of support of pump bars, measuring position of polished rod, determining its extreme upper and lower positions, setting a set-point for dynamic level of liquid in well shaft higher than pump receiving level and periodical disconnecting of device for collecting liquid. Values of forces are fixed at mo...

FIELD: oil extractive industry. ^ SUBSTANCE: method includes continuous control of rod position and force in point of support of pump parts, calculation on basis of continuous analysis of forces of level of emptiness of pump and on basis of difference of forces in upper and lower points of dynamic liquid level in well. Set-points of allowed emptiness and optimal dynamic level are set, appropriate ...

FIELD: oil extractive industry. ^ SUBSTANCE: method includes lowering deep device on cable and pushing it into horizontal and slanted portions. Before deep device a portion of armored cable is placed with possible rotation, which is rotated during pushing of deep device. Below deep device reverse electric engine is placed with reducer. Portion of armored cable is connected to output shaft of reduc...

FIELD: wind-power engineering; conversion of air flow energy into mechanical energy fed to electric generator. ^ SUBSTANCE: proposed vortex-type windmill-electric power unit has tower, air intake, air offtake, and rotary working element connected to electric generator. Tower is positioned in downwind direction; working element is made in the form of parallel cylindrical rotors so that space crossi...

FIELD: wind-power engineering; electrical energy generation. ^ SUBSTANCE: proposed counter-rotor windwheel-electric generator has tower with swivel base and windward positioning device and bladed windwheels shaft-mounted on base; stator is disposed at bottom position of blades and the latter mount ferromagnetic plates crossing stator air gap; novelty is that low- and high-speed windwheels rotating...

FIELD: transport engineering; cross-country vehicles. ^ SUBSTANCE: proposed differential lock mechanism contains interlock and control member. Vehicle brake system members are used in interlock. Control member contains driving wheels rotation pickups 6, spool 4, pump 2 and relay 5. Rotation pickups 6 are mechanically connected with axle-shafts, and output of one of pickups is electrically connecte...

FIELD: transport engineering; cross-country vehicles. ^ SUBSTANCE: vehicle parking brake system members are used in interlock and control member of differential lock mechanism. These members are: control lever, ratchet mechanism, flexible rod, brake shoes and brake drums. Control lever is mechanically connected with ratchet mechanism and rigidly connected with axle. Clutches are installed on splin...

FIELD: gaming devices. ^ SUBSTANCE: device has result determining device, at least, two gaming elements, interconnected by respective executing devices, set-point devices for states of gaming elements, connected to device for determining gaming result, respective outputs of which are connected to executing devices of gaming elements. Set-point devices of gaming elements are meant for setting at le...

FIELD: gas-discharge engineering; data displays built around gas panels. ^ SUBSTANCE: proposed gas panel has first and second insulating plates 1 and 2, respectively; inner surface of first plate mounts set of parallel electrodes 3 and that of second one, set of electrodes 4 connected past sealing joint to contact pads 5 and 6, respectively. Insulating coating 7 on electrodes past sealing joint ca...

FIELD: cleaning robot, cleaning system and method for controlling them provide effective cleaning realized by order due to determining distance and direction of robot motion in spite of upon wheel slipping or floor irregularities. ^ SUBSTANCE: cleaning robot includes main housing; drive unit for driving wheels mounted in lower part of main housing; directed downwards photo camera placed between wh...

FIELD: cleaning robot and cleaning system allow to detect if room cleaning is over without preliminary inlet of data (by means of user) concerning to cleaned zone and to inform user about progress of cleaning works in cleaned room. ^ SUBSTANCE: robot-vacuum cleaner for cleaning room at using wireless communication with device arranged outside robot includes main housing provided with suction unit ...

PURPOSE: A system for distributedly monitoring and analyzing network traffic is provided to perform distributed monitoring and analysis for network traffic through plural end point devices without using a centralized testing server or a centralized controller. CONSTITUTION: End point devices(102-1-102-M) include software, firmware and hardware elements including a distributed test unit(104-1) for ...

The invention relates to a resin composition that has, as a raw material, a product that is obtained by addition reacting a compound having a unsaturated carbon bond to a resin decomposed product obtained by chemically decomposing a urethane resin, alternatively, by decomposing a urethane resin with a compound having a unsaturated carbon bond. The resin composition can be solidified by polymerizat...

In the method of the invention, updated data is synchronizing between a user terminal and another computer. One of these computers is a mobile phone and both computers have an interface for fetching and launching services and a memory for storing data. At least one of the available services comprises items for managing purposes. In the method the user terminal requests a service comprising items f...

FIELD: computers. ^ SUBSTANCE: method includes recording money sum to seller station and together with identification code of seller station is sent to device for evaluating balance, where data are temporarily stored. Payer via mobile phone transmits identification code of station of seller station to balance input device, which compares identification code to stored data and sends appropriate mon...

Aerogels (I) are based on polymers obtained by polymerisation of halogen-substituted aliphatic or aromatic hydrocarbon monomer(s) (II) with at least two ethylenic functions. Independent claims are also included for the following: (1) aerogels (I) based on copolymers of (II) and other comonomers (III); and (2) method for the production of (I), involving formation of a gel by polymerisation of (II)...

A system usable with a subterranean well having a casing comprises a packer (619) which is lowered downhole inside the casing, and a sensor (636) attached to the packer to measure a characteristic of the well surrounding the borehole. The packer may be mounted on a production string (626) or other tools used in a borehole and is set in place against the casing wall by expanding portions (634) of t...