PROBLEM TO BE SOLVED: To improve comfortableness in a hybrid vehicle.

SOLUTION: In this hybrid vehicle 10, an ECU 100 can operate an engine 200 at its lean limit or combustion limit by performing MG1 feedback control. On the other hand, when a shift position of a shift lever is in an N-range and the MG1 feedback control is performed, the ECU 100 makes MG2 to output motor torque Tm correspon...

PROBLEM TO BE SOLVED: To solve the problem that the present driving support system sometimes provides inappropriate control for a driver such as ABS on a compated snow road surface.

SOLUTION: A driving support system for supporting vehicle driving by a support means includes: a weather condition input means for inputting a weather condition from an occupant, a weather condition detection se...

PROBLEM TO BE SOLVED: To provide a power source management system for an electronic control device for a vehicle, in which power consumption can be reduced without deteriorating responsiveness.

SOLUTION: This power source management system 1 is for a multi-processor system for a vehicle comprising a first CPU core 21, a second CPU core 31, and a bus to which the CPU cores 21 and 31 are conn...

PROBLEM TO BE SOLVED: To provide a control device capable of suitably suppressing a gear change shock in a transmission which is caused by interruption of current-carrying to an electric motor during execution of rotation synchronization control in a hybrid vehicle adapted to transmit power of the electric motor to a wheel-side output shaft through the transmission.

SOLUTION: This hybrid ve...

PROBLEM TO BE SOLVED: To prevent an occupant from having a sense of incongruity in a traveling behavior of his/her own vehicle when controlling the vehicle-to-vehicle distance between his/her own vehicle and a preceding vehicle.

SOLUTION: In the conversion of the actual vehicle-to-vehicle distance between the preceding vehicle and the vehicle concerned to a target vehicle-to-vehicle distanc...

PROBLEM TO BE SOLVED: To acquire a center-of-gravity position lateral acceleration by correcting a lateral acceleration detection value by a lateral acceleration sensor loaded at a position separated from the center of gravity of a vehicle without using a yaw rate sensor detection value.

SOLUTION: This center-of-gravity position lateral acceleration acquisition device is applied to a vehicl...

PROBLEM TO BE SOLVED: To prevent the stall of an internal combustion engine while suppressing the overheat of a clutch.

SOLUTION: An ECU executes a program including steps of detecting the gradient of a road surface when an estimated temperature T of the clutch is higher than a preset threshold 1 (YES in S100) (S102); calculating traveling resistance and friction resistance (S104); performi...

PROBLEM TO BE SOLVED: To suitably control vehicle behavior by a vehicle behavior control device even during run-flat running.

SOLUTION: The device controls behavior of a vehicle with run-flat tires on. The device includes a deriving means deriving a stability factor in normal operation to lateral acceleration of the behavior during normal traveling; a prediction means predicting a stability...

PROBLEM TO BE SOLVED: To provide a hybrid prime mover constituted by arranging the motor between an engine and a transmission and improving a bearing structure of a motor rotary shaft to shorten the whole length of the motor.

SOLUTION: An end part of the rotary shaft 24A protruding onto an engine side from a main body of a rotor 23 is received by a pilot bearing 26 provided in a central par...

PROBLEM TO BE SOLVED: To realize shortening of gear change time and improvement of gear change quality in a hybrid vehicle.

SOLUTION: In this drive unit for the hybrid vehicle comprising an engine 10, a transmission 13, a first motor generator 11 disposed between the engine 10 and the transmission 13, and a second motor generator 12 disposed between the transmission 13 and a vehicle driving...

PROBLEM TO BE SOLVED: To improve fuel economy by optimizing the capacity of a clutch for transmitting power from both an engine and a motor in a mode of covering at least a part of a wheel driving force with motor torque.

SOLUTION: In S21, a transmission torque capacity corresponding to a vehicle transient response is determined by multiplying target input axis torque tTi by a safety factor...

PROBLEM TO BE SOLVED: To enable an engine start even at a low speed in switching from an electric travel (EV) mode to a hybrid (HEV) mode.

SOLUTION: A stop state is canceled by release of a brake pedal at t1, an accelerator pedal is held to increase the speed at t2, and the vehicle is crept in the EV mode at a motor torque tTm in extent of creep torque corresponding to the release of the ac...

PROBLEM TO BE SOLVED: To provide a driving auxiliary device for vehicle which executes control for avoiding a collision when cross-over probability with another vehicle is increased during following traveling to a preceding vehicle.

SOLUTION: The driving auxiliary device for vehicle capable of making an own vehicle perform following traveling with a specific vehicle as a following object ve...

PROBLEM TO BE SOLVED: To identify packaging paper in a medicine packaging apparatus.

SOLUTION: The medicine packaging apparatus comprises a packaging paper core, wound with the packaging paper to pack a medicine, a medicine filling means to fill the packaging paper with the medicine, a heat sealing means to seal by heat the packaging paper with the medicine filled with the medicine, a micro...

PROBLEM TO BE SOLVED: To reduce load of an operator, to reduce damaged paper and to reduce a clearance adjustment time by automating a lead-in roller clearance adjustment mechanism.

SOLUTION: The lead-in roller clearance adjustment mechanism 10 is provided with a pair of lead-in rollers 9A and 9B for guiding a web W with the clearance thereof, and a clearance adjustment mechanism for adjust...

PROBLEM TO BE SOLVED: To provide an antistat for polyester resins that has good processability at the time of addition to polyester resins and imparts stable antistaticity without detriment to transparency of the polyester resins, and a polyester resin composition excellent in processability, antistaticity and transparency.

SOLUTION: The antistat for polyester resins comprises the component...

PROBLEM TO BE SOLVED: To provide a rubber composition which shows a small Mullins effect and thus shows only a small reduction in the elastic modulus after a large deformation.

SOLUTION: The rubber composition contains at least a rubber component and an aromatic oligomer to which an ethylene oxide is added. The preferred amount of the aromatic oligomer contained is 2-60 pts.mass per 100 pts...

PROBLEM TO BE SOLVED: To provide a resin composition realizing a high gas barrier property under wide range curing conditions, in addition to inherent excellent properties of epoxy resins, and to provide coatings and adhesives obtained by using the composition.

SOLUTION: The gas barrier resin composition contains an epoxy resin, an epoxy resin curing agent and a curing promoter, wherein a s...

PROBLEM TO BE SOLVED: To provide a drill bit which decreases resistance formed between the surface of the side wall of the drill bit and the wall surface of a cavity formed in mud when opening a taphole in a blast furnace, thereby improves working efficiency, and shortens a necessary period of time for the operation.

SOLUTION: The drill bit 1 to be used when opening the taphole in the blast...

PROBLEM TO BE SOLVED: To provide a taphole facing bit which can easily replace a tooth point installed thereon that needs to be replaced, when some of a plurality of the tooth points are damaged or worn out, always provides a sharp tooth point, and consequently improves the efficiency of leveling work.

SOLUTION: The taphole facing bit 1 is mounted on a leveling device which is used for smoo...