PROBLEM TO BE SOLVED: To suppress the transmission of vibration generated by a vehicle carrying an image forming device to a photographing section therein.

SOLUTION: A first support 16 fixed inside of a vehicle is connected to a second support 18 via a vibration-proof mechanism 22 provided at the upper part of the first support. Due to this structure, the vibration generated by the vehicle ...

PROBLEM TO BE SOLVED: To provide a laminated plate type tire vulcanizing mold which can be degassed surely and a method for producing the mold.

SOLUTION: After a shim material 14 of 0.005-0.05 mm thickness is inserted between plates 12 and 12 of 0.5-15 mm thickness forming an air discharge channel 15 of 0.2-2 mm depth from the side of a tire tread surface on the side of a laminated surface ...

PROBLEM TO BE SOLVED: To adjust an axial position between a housing member and a bearing; to carry out pre-load adjustment for the bearing and backlash adjustment for a pair of orthogonal gears; to reduce the number of components, machining man-hours, and assembling man-hours; and to reduce the cost.

SOLUTION: A support structure comprises a drive pinion shaft 11 rotated by a driving force ...

PROBLEM TO BE SOLVED: To provide a vehicle safety device capable of suitably avoiding collision with an obstacle in response to the traveling state or the stopping state of a vehicle.

SOLUTION: An obstacle distance detection part 1 detects an obstacle distance, i.e., a distance from the obstacle (for example, preceding vehicle) in a traveling direction to the vehicle concerned. When the obs...

PROBLEM TO BE SOLVED: To provide a traveling speed change device for a work vehicle having a cruise control mechanism capable of reliably maintaining a braking state of a traveling-driving body and eliminating any operational error of the braking.

SOLUTION: The number of rotation of a wheel is changed by turning a trunnion shaft 32 of a hydrostatic continuously variable transmission (HST) b...

PROBLEM TO BE SOLVED: To smoothly switch the mode from High to Low.

SOLUTION: When the change gear ratio reaches the high side by Δi1 from the mode switching change gear ratio i0 (t1), and when a low brake BLOis set in a state immediately before the tightening start, and the change gear ratio reaches the high side by Δi2 from i0 (t2), replacement is started by uncoupling a high clu...

PROBLEM TO BE SOLVED: To effectively reduce the roll of a vehicle body by providing the braking-driving force to specified wheels according to the traveling situation of a vehicle.

SOLUTION: The target braking force Fbti of each wheel is operated based on the master cylinder pressure Pm (S20). When the vehicle is in a turning traveling state (S30) and the absolute value of the estimated lat...

PROBLEM TO BE SOLVED: To provide a trans-axle mount structure capable of ensuring sufficient vibration preventive performance when mounting a trans-axle with a rear wheel differential gear device and a transmission integrated therewith on a vehicle body.

SOLUTION: A mount member 11 consisting of a cylindrical elastic member is arranged substantially at a center of a bracket 6, a bearing 12 ...

PROBLEM TO BE SOLVED: To provide a brake control device of a vehicle capable of suppressing the influence of an eventual transfer of the braking force from one wheel to another upon the vehicle behavior.

SOLUTION: The braking force distribution to the left and right wheels of at least either the front wheels or rear wheels is adjusted so as to suppress the yawrate generated in association w...

PROBLEM TO BE SOLVED: To provide a vehicle travel control device for improving drivability while securing travelling performance as desired by a driver by executing speed reducing control considering the conditions of a road surface on which a vehicle travels without giving a sense of incongruity to the driver.

SOLUTION: The conditions of the road surface in front of the vehicle being trave...

PROBLEM TO BE SOLVED: To provide an internal gear cover fixed in axial and circumferential directions in relation to the internal gear as well as being easily fitted in the cover of a planetary gear mechanism.

SOLUTION: There is provided, in the internal gear, an approximately cross-like groove 20 composed of a first groove 21 extending in the axial direction of the internal gear and a seco...

PROBLEM TO BE SOLVED: To provide a gear case enabling the easy control of a pre-load applied to bearings in a gear case in an assembling operation and a maintenance.

SOLUTION: This gear case is formed so that a power is transmitted from a power transmission mechanism stored in a case 22 on a machine side to an external apparatus 67 through a counter gear 65 in a gear case 150 for power take...

PROBLEM TO BE SOLVED: To increase the freedom degree of the mounting of a case by securing the dimensions of a space on the outside of the case.

SOLUTION: This breather device 100 comprises a projected part 104 projected to the outside of a case which is formed on a case and in which a vent passage having a step part with a difference in a passage diameter is formed, a packing 108 installed...

PROBLEM TO BE SOLVED: To provide a liquid crystal display device which is driven at high speed, further scarcely produces black out and uses a bistable cholesteric liquid crystal.

SOLUTION: The liquid crystal display element comprises a chiral nematic liquid crystal layer held between substrates wherein the liquid crystal changes into a planar alignment or into a focal conic alignment corre...

PROBLEM TO BE SOLVED: To enable an image forming apparatus which is mounted on a vehicle and has a vibration restraining mechanism, to easily switch between the state in which a holding part is fixed to the vehicle and the state in which the holding part is released from the fixed state.

SOLUTION: A second support post 18 having a main body 20 is freely swingably held, via a vibration-proof...

PROBLEM TO BE SOLVED: To provide a method for inspecting batteries and an apparatus therefor that can inspect accurately, even if electrode plates are arranged diagonally in the manufacturing process of the batteries.

SOLUTION: The battery 1, with a separator arranged in between a plurality of longitudinally arranged sheets of electrode plates 11, is conveyed by a conveyor. Reproduced image...

PROBLEM TO BE SOLVED: To provide a ceiling embedded luminaire capable of protecting an adjustment switch while improving design property even if a sensor detection part is provided inside a reflecting plate.

SOLUTION: According to this embodiment, the design property can be improved since the adjustment switch 62 is provided in the luminaire 1 to be located outside 55 of the reflecting plat...

In a paper web feed unit of a rotary press, a paper web taken out of a paper roll is longitudinally cut into first and second cut paper webs, which are fed out toward the downstream side by a driven roller of a feed-out mechanism, and only the first cut paper web is passed through an angle bar section for transferring the traveling path of the first cut paper web. The paper web feed unit is equipp...

A process synchronises the interaction between aggregate components forming part of an automotive transmission system arising from abrupt changes on the accelerator pedal. The motor and the gearbox with several ranges are linked by a clutch. During the acceleration phase clutch operation is regulated to bring the gear input shaft speed (nAW1; nAW2) is below that of the motor tickover speed (nLL).;...

In a process to manufacture an automotive windscreen with a three-dimensional profile, a pre-cast sheet of curved windscreen glass is placed on a support. The windscreen is cut out by a laser beam that is followed by a spot cooling assembly. The laser cutting action is a two-stage process followed by separation of the windscreen from the outer margins.; Methoden zum Durchtrennen von gewölbten Subs...