transport engineering. SUBSTANCE: in manual control device carburetor throttle control backings is provided with are rocking on axle installed in upper part of backing plate and connected with cable. Brake and clutch control device is provided with elements and tie-rod forming, together with under-steering wheel lever, and trapezium movably connected with lower part of backing plate by one end of ...

oil and gas producing industry; applicable in removal of hydrate-paraffin accumulations, geophysical investigations and other operations on cable for preventing emergency outburst of instruments by oil or gas streams. SUBSTANCE: blowout preventer has apparatus, cable, cable head and member of braking engagement with casing or tubing. Said member is made in the form of rod which has cutoff in its l...

production of oil, gas and similar fluids. SUBSTANCE: method includes lowering of geophysical instrument into well and concurrent installation of highly sensitive recording instrument at external side of wellhead. Results of effect of well processes on geophysical instrument and highly sensitive instrument are recorded. Readings of highly sensitive instrument are calibrated and identified by readi...

oil producing industry; applicable in determination of pressure in oil-water-saturated formation and detection of nonuniformities in them. SUBSTANCE: method includes building up of pressure disturbances in formation under nonstationary filtration conditions produced by single or multiple well bringing into operation and shutting-in and measurements are made of occurring displacement and deformatio...

electronic equipment, applicable for display of graphic and video information. SUBSTANCE: thicknesses of the panel dielectric plates, one of which has thickness h1 lesser than thickness h2 of the second dielectric plate, are bound up with the following correlation: 0,2<=h1/h2<=0,7. EFFECT: enhanced leak- proofness of the gas-discharge display panel with an outside sealing seam. 1 dwg

electronic equipment, applicable for display of television information. SUBSTANCE: gas-discharge display panel has mutually perpendicular first and second dielectric barriers limiting the cells formed in the crossings of the anodes positioned between the second barriers and grouped in the cells of the wire cathodes placed between the first barriers, dielectric lugs with a trapeziform section are m...

electronic equipment, applicable for display of graphic and video information. SUBSTANCE: in the panel with a shoulder formed around the edges, which accommodates the outside sealing seam, shoulder side width tsh formed by the upper dielectric plate, having the dimensions larger than the dimensions of the lower dielectric plate, is selected according to expression tsh = (1,8-5)mm2/t, where t - the...

electronic equipment, applicable for display of graphic and video information. SUBSTANCE: used as sealing seam material of the construction is material whose melting point tmelt is selected according to correlation dd>=tmelt>=1,08tdegas at tmelt.d<=580°C, where td - the temperature of deformation of dielectric material based on low-melting glass; tdegas - the temperature of degassing of the panel ...

electrical engineering, manufacture of cells with long service time. SUBSTANCE: in agreement with invention lead-acid cell includes electrolyte, unit of negative and unit of positive electrodes isolated by separators and packed in envelope from acid-resistant synthetic cloth. Polypropylene cloth fabricated by weaving of polypropylene complex threads with density of 15-20 tex and polypropylene yarn...

manufacture of reinforcing woven cloth. SUBSTANCE: reinforcing woven cloth for envelope of positive electrode of lead-acid cell can be utilized in design of attendance-free and leak-tight cells. Proposed design of reinforcing woven cloth comprises threads of polythyleneterephtalate warp and yarn of modified polyacrylonitrile. Reinforced woven cloth additionally includes two zones of cloth binding ...

The debt collection work station (60) consists of a data bank (62), processor (63) and a modem (64) for connection to the Internet (61). All the parties to the matter have work stations (65) which are connected to the Internet.

PURPOSE: To provide a control device for a hybrid vehicle capable of greatly enhancing fuel consumption through the assistance of motor driving by greatly increasing the amount of regeneration. CONSTITUTION: The hybrid vehicle has an engine and a motor as the sources of drive for the vehicle. The control device for the hybrid vehicle stops the supply of fuel to the engine using a fuel supply stopp...

PURPOSE: To provide a control device for a hybrid vehicle enhancing fuel consumption. CONSTITUTION: The control device includes: an all-cylinder cutoff standby flag F-ALCSSTB for determining whether or not all of cylinders can be cut off an all-cylinder cutoff canceling requirement meeting flag F-ALCSSTP for determining whether or not the requirement for canceling the cutoff of all the cylinders i...

PURPOSE: To provide a hybrid vehicle control device capable of securing the proper amount of regeneration at deceleration. CONSTITUTION: In the hybrid vehicle control device, which is provided with an engine and a motor, that performs regenerative braking by the motor according to a deceleration state, when a vehicle is decelerated the engine, which is of a stoppable-cylinder type that can stop cy...

PROBLEM TO BE SOLVED: To provide an air cell for preventing a decubitus and an air mat device using it by which a deviation force inside of a skin tissue in contact with beddings can be suppressed and clogging of a capillary vessel can be saved. SOLUTION: An air cell 10 in a shape of a thin and long bag a plurality of which are arranged side by side to constitute an air mat, has an upper surface 1...

PROBLEM TO BE SOLVED: To provide a method for manufacturing a high performance catalyst capable of conveniently and reproducibly manufacturing the same, which decreases deterioration of the catalytic performance by the thermal decomposition of additives in the heating step of a catalyst for use in producing an unsaturated aldehyde and an unsaturated carboxylic acid by the gas phase catalytic oxida...

PROBLEM TO BE SOLVED: To provide a slug-rising preventive die that is effective for suppressing slug-rising regardless of the thickness of a workpiece and that is inexpensive as well as high in productivity. SOLUTION: In the slug-rising preventive die for preventing the slugs 7' from rising that are punched out by a piercing punch 9, a cutting-part hole 12 for engaging with the piercing punch 9 is...

A combined cycle electric power plant comprising a combination of a gas turbine plant and a steam turbine plant, and using a cooling steam for cooli ng a high temperature portion (5) being cooled, of a combustor (4) on a gas turbine (2). When a cooling steam is short at the time of startup or suspension, an air line (9) for permitting an outlet air of an air compresso r (1) to pressurize a steam p...

An assembly for processing blanks comprises a first endless conveyor (1) with locations for holders for the blanks and at least one stationary processing station as well as optionally a second conveyor (6) arranged next to said first conveyor (1). The first conveyor (1) comprises a number of self-propelled vehicles (2), where each vehicle carries a tool (4) and a holding device (3) for the blank d...

A multi-stage transmission (3) of which gears do not rattle when an engine (1) is idling. The multi-stage transmission (3) is equipped with a splitter (17) that has a neutral position (N). The splitter (17) is located between a clutch (2) and a main transmission (18). A drive power from the engine (1) is not transmitted to the main transmission when the splitter (17) is in the neutral position. Th...