FIELD: light-sensitive materials. SUBSTANCE: method including exposure of photo plate, photographic processing of exposed plate, washing, and drying is distinguished by that, before exposure and after photographic processing, plate is treated in solution composed, wt.%: surfactant, 5-8; urea or its derivatives, 1-2; Trilon B, 0.1-0.2; isopropyl alcohol, 20-30; water, the balance. EFFECT: increased...

PROBLEM TO BE SOLVED: To provide an X-ray CT device which has high degree space resolution (for example, 0.35 mm) at an axial surface and satisfactory continuity of helical scan in a body axial direction. SOLUTION: An image is reconstituted in accordance with fine pick data SP which is collected by a detecting means from data (actual data 1, 2) while helical scan is carried out. Thus, it is possib...

PROBLEM TO BE SOLVED: To reduce shift shock by engaging clutches again for an electrically driven transmission at any time as intended by an operator. SOLUTION: A speed change control part to which a shift signal made by depressing a shift switch is inputted, drivingly controls an actuator, engages/ disengages, clutches with each other, and also revolves a shift drum. At this time, the shift switc...

PROBLEM TO BE SOLVED: To enable a device to immediately perform behavior control in accordance with a steering angle even by not detecting a neutral position when an engine is started, in this case, so as to prevent also generation of hunting. SOLUTION: In a calculating part 20, during the time a neutral position is not detected based on a signal of a sensor 16, and a steering angle can not be det...

PROBLEM TO BE SOLVED: To feed a cylindrical sheet according to the mode of a body to be packaged by performing the compensation feed of the cylindrical sheet to the predetermined feed quantity of the cylindrical sheet according to the filling quantity in a forming, filling and packaging machine. SOLUTION: A cylindrical sheet 23 is fed for the predetermined feed quantity according to the filling qu...

PROBLEM TO BE SOLVED: To continue the operation of a steam turbine system so as to enable the power generation and the supply of steam even in the case where a gas turbine system is stopped by generating the main steam in a boiler, and heating the returning water and the supplying water of a steam turbine with the exhausted heat of the exhaust gas of a gas turbine with an exhausted heat recovery d...

PROBLEM TO BE SOLVED: To quickly, accurately and safely perform a re-start of a plant after stopping it by supplying the steam to a gas turbine cooling part when the steam condition achieves a level for generating a constant self-tube steam from an exhaust heat recovery boiler, and switching the operation of the normal operation when the output from the exhaust heat recovery boiler achieved a rate...

PROBLEM TO BE SOLVED: To maintain the excellent burning. condition of a gas turbine without hindering the load following performance of a plant even in the case of the over- heating operation by storing the heat held in an exhaust heat recovery boiler so as to enable the output control by a steam turbine in the case where an estimation that the excellent burning condition is not maintained in the ...

PROBLEM TO BE SOLVED: To quickly, accurately and safely restart a plant after stopping it once by filling a cooling part with the auxiliary steam before starting a gas turbine, and eliminating a drain, and warming up a gas turbine cooling part with the warm-up operation by the auxiliary steam. SOLUTION: Auxiliary steam of an auxiliary boiler 13 is supplied to a gas turbine 10 and a burner 11 throu...

PROBLEM TO BE SOLVED: To enable the use of a raw material easy to be obtained without hindering stability of a steam cooling function by supplying the exhaust of a high-pressure steam turbine as cooling steam to a cooling steam supplying passage, and supplying the steam from a middle-pressure evaporator thereto for mixing so as to lower the temperature of the cooling steam. SOLUTION: High-pressure...

PROBLEM TO BE SOLVED: To provide a composite generating plant which can control the lowering of the thermal efficiency of the plant as a required cooling is carried out to the high temperature member of a gas turbine through a steam supplied from a steam cycle for restraining a steam temperature at the outlet of the gas turbine low. SOLUTION: A generating plant has a gas turbine (c), an exhaust he...

PROBLEM TO BE SOLVED: To increase the efficiency of an LNG evaporating power generating system using a gas turbine diverted from an aircraft and without using sea water. SOLUTION: Steam is injected into air discharged from the compressor of a gas generator 13, exhaust gas from a boiler 5 is brought in contact directly with water in an exhaust gas cooler 8 for recovery of exhaust heat and water, an...

PROBLEM TO BE SOLVED: To provide a prime mover control device capable of preventing a shock caused by an engagement of a one-way clutch and also attaining a shift stage or preventing acceleration from being delayed. SOLUTION: A control device is structured so that it connects an automatic transmission in which a one-way clutch is engaged by an increase of torque input from a prime mover so as to s...

PROBLEM TO BE SOLVED: To surely limit maximum speed by making a double system by adding a maximum speed limit control by a gear shift control system to a maximum speed limit control by an engine control system. SOLUTION: An engine control unit 3 enforces a supply fuel cut control of an engine 1 and limits maximum speed so as not to exceed 180 km/h when speed detected by a speed sensor 2 exceeds se...

PROBLEM TO BE SOLVED: To provide a solar heat water heater which can be dealt with any auxiliary heat source without complication of execution at a site even when the heat source is thereafter mounting. SOLUTION: The water heater comprises a solar heat collector 2, hot water storage tank 1 connected to the collector 2 via a circulation pipe 5, and water supply pipe 7 for draining hot water from th...

PROBLEM TO BE SOLVED: To prevent a battery jar constituted of a two- or more-layered film resin from being damaged by providing an impact absorbing member between the film resin layers of a sealed storage battery wrapped with two or more layered film resin. SOLUTION: A battery jar is constituted of a polypropylene layer 1, a polypropylene layer 2, a polyethylene phthalate layer 3, an impact absorb...

PROBLEM TO BE SOLVED: To prevent a positive electrode plate from growing towards a cover and a terminal direction, and ensure suitability for the design of a large capacity battery and the automatic manufacture thereof on a large scale by providing an internal battery constraint body and an external battery constraint body for directing the growth of a positive electrode grid in use toward a vesse...