PROBLEM TO BE SOLVED: To provide a control device for a vehicle equipped with a continuously variable transmission which prevents an output change control of a power source accompanied with speed change which causes a shock.

SOLUTION: A control device for changing output of a power source so as to change output rotation speed of the power source in a direction of a change in input rotation ...

PROBLEM TO BE SOLVED: To provide a mode transition control device for compatibly securing smooth starting performance of a hybrid vehicle in low load starting and the starting property in high load starting by avoiding roll-back.

SOLUTION: The hybrid vehicle has a differential device with four or more input/output elements arranged on a collinear drawing. An input from an engine E is assign...

PROBLEM TO BE SOLVED: To provide a parallel-axes type multi-stage transmission which is constituted so that excessive torque is not transmitted to an output gear.

SOLUTION: Friction members 9 are provided respectively between an input gear 6 and the output gear 7 in a reverse idle-gear 4, and between the input gear 6 and a rock-nut 8 rotatably supporting the input gear 6 on a reverse-idle s...

PROBLEM TO BE SOLVED: To provide a driving force controller and a driving force control method for reducing the sense of incompatibility or the sense of displeasure of a driver in the congestion of a road on which its own vehicle is traveling.

SOLUTION: This driving force controller for a vehicle is configured to make a deceleration control part 46 control the deceleration of its own vehicl...

PROBLEM TO BE SOLVED: To provide a lead storage battery used for an automobile like an idle stop vehicle or a regenerative break system mounting vehicle frequently used at at low SOC area, prevented from corrosion of an anode grating ear, with long life and high reliability.

SOLUTION: The battery comprises a cathode plate made of a cathode grating not containing Sb, an anode plate structure...

PROBLEM TO BE SOLVED: To provide a manufacturing method that achieves an excellent welding condition for a lead acid battery even with an elliptical through-hole by solving the problem wherein when inter-cell connection is performed by resistance welding, while the through-hole provided in an inter-cell barrier rib is smaller in height and is thus useful for achieving higher energy density if t...

PROBLEM TO BE SOLVED: To provide a controller of a hybrid vehicle which can generally improve a fuel consumption, a power and steering stability by controlling a longitudinal distribution at turning.

SOLUTION: The controller of the hybrid vehicle includes an electric motor M1 which drives one of front and rear wheels by first drive sources E, M2, M4 and the other of the front and rear wheel...

PROBLEM TO BE SOLVED: To provide a technology that can prevent a wind turbine generator from being damaged, and secure the safety of the generator, in the wind turbine generator.

SOLUTION: The shaft torque of a rotating shaft connected to a wind turbine, and the number of revolutions of the wind turbine, a rotating shaft or a synchronous generator is detected, and the operation state of the...

PROBLEM TO BE SOLVED: To provide an actuator for power transmission device capable of properly detecting a position of a shift fork while suppressing costs.

SOLUTION: Since lubricating oil in an automatic transmission is inhibited from entering the inside of a cover member 12 by a seal 32, a sensor 33 of detection rod 33a brought into contact with a cam member 30 in the cover member 12 is l...

PROBLEM TO BE SOLVED: To prevent a gear-change shock arising from a coast-down shift in a hybrid vehicle.

SOLUTION: This hybrid vehicle control device in which a second motor generator 5 is connected to an output shaft 2 via a transmission 6 is provided with a traveling state deciding means by which the vehicle is decided to be in the course of a down shift that enlarges the reduction ratio...

A distributor plate (38) is adapted to be releasably mounted on a horizontal lower disc of a rotor of a vertical shaft impact crusher. The rotor has an opening for the intake of material to be crushed and at least one outflow opening for material leaving the rotor. The distributor plate (38) is an equilateral polygon as seen from above.

Während die Einrichtungen der Hauptanmeldung 102004003807.4 auf der Basis von Zerkleinerungseinrichtungen mit senkrecht oder annähernd senkrecht stehenden Achsen und Werkzeugen mit hohen Drehzahlen aufgebaut sind, behandelt diese Zusatzanmeldung Zerkleinerungseinrichtungen mit annähernd waagrecht liegenden Achsen und Werkzeugen zur Zerkleinerung mit geringer Drehzahl. DOLLAR A Die geringe Drehzahl...

Vorrichtung zum Bespiken von Reifenlaufstreifen mit Spikes (1), mit nicht-zylindrischen, länglich bzw. oval oder dergleichen ausgeführten Fußteilen (2), welche Vorrichtung eine Spikepistole (6) aufweist, in welche die Spikes (1), Fußteile (2) voran, mittels eines angesetzten Schlauches, Rohres (9) oder dergleichen gelangen. Eine Einrichtung (7, 7') ist zur übereinstimmenden Ausrichtung der Fußteil...

The method involves carrying out post processing of graphic data of 2-D layer pictures for regulation of brightness values and/or initial values. Picture areas are marked or segmented on the pictures, where the valuation of both values exhibits a type of deposits. A three dimensional area is automatically formed from the picture areas, and has volume that is provided as value for the volume of the...

Eine Vorrichtung zur Steuerung der Verzögerung für ein Fahrzeug, die eine Verzögerungssteuerung für das Fahrzeug durch einen Betrieb eines Bremssystems durchführt, das eine Bremskraft auf das Fahrzeug aufbringt, und durch eine Schaltungsbetätigung, welche ein Getriebe des Fahrzeugs in einen vergleichsweise niedrigen Gang oder ein kleines Übersetzungsverhältnis schaltet, ändert zur Verzögerungssteu...

A reflection spectrometer provided with a probe to which the radiation of at least one radiation source can be transmitted by at least one radiation emission conductor transmitter in such a way that said radiation source can be directed to or in an investigated object and which makes it possible to transmit radiation to or in an investigated object and/or emitted by such object to a radiation rece...

In the method for threading of a paper or paperboard web a narrower tail (T) separated from the paper or paperboard web (W) is conveyed between different holding points. On the travel path of the tail (T) there is at least one tension measuring device (1) which is arranged to measure the tension of the tail (T) passing by, said device (1) being connected to a data processing unit (7) which is conn...

A hole forming tool (1) has a main body (2) constructed of a cemented carbide comprising 10 +/-2 wt% Co, 0.65 +/-0.25 wt% Cr, WC for the balance, and inevitable impurities. The average particle diameter of WC is in the range of 0.1 to 1.0 mu m, and a radial rake angle ( beta ) of cutting edges (8) formed at the end of the hole forming tool (1) is set to a negative value in the range of -5 DEG to...

In an apparatus and method of voice recognition, where there are the same names, a recognition system side creates the keyword for limiting the plurality of names and inquires a user, and in response to the inquiry, the user announces a keyword, thereby executing limiting processing. Because of such a configuration, a single desired spot name can be finally specified easily.

Accumulator with cell container(s) incorporates a hardenable casting compound which fixes the respective plate blocks in these containers so that their vibration is virtually prevented. The casting compound at least partially fills the space between the surface of the plate blocks and the pole bridges. Accumulator with one or more cell containers (16) incorporates a hardenable casting compound whi...