A dry powder medicine inhaler has an impeller non-concentrically disposed in a mixing chamber. A motor spins the impeller at high speed. A plunger introduces a dose of powdered medicine into the chamber so that all powder particles are available for intermixing disaggregation and comminution. An aperture receives a first stream of air and passes it towards the mouthpiece for inhalation by the user...

A respirator (10) includes a filter cartridge (12) that has a housing (16) and a bonded sorbent filter element (20). Housing (16) includes a sleeve (32) that has an inner surface (36) and a folded edge (42). The filter element (18) includes a bonded sorbent filter element (20) that is pressed against the sleeve's inner surface (36) and that is held in the sleeve (32) by the folded edge (42).

PURPOSE:To prevent surely the excessive slip of drive wheels at the time of shift-up, by changing a drive wheel speed by means of a carwheel speed changing means at the time of the shift-up of an automatic transmission, and detecting the slip condition of drive wheels on the basis of this. CONSTITUTION:When an automatic transmission 4 conducts shift-up, a drive wheel speed detected by means of a c...

PURPOSE:To omit surface treatment by making the negative electrode active material weight larger than the positive electrode active material weight by 15-20%. CONSTITUTION:The negative electrode active material weight is made 115-120% of the positive electrode active material weight in a battery with a copper grid used as a negative electrode grid. The copper grid can be used for the battery as it...

PURPOSE:To improve the discharge capacity and cycle life performance by using a positive electrode lattice made of a lead alloy containing no antimony, and adding the powder of minium (Pb3O4) and antimony or antimony compound to a positive electrode active material. CONSTITUTION:A positive electrode lattice made of a lead alloy practically containing no antimony is used, and the powder of minium (...

PURPOSE:To optimize a total of controlling effect by distinguishing a vehicle condition area with large controlling effect of controlling braking force from a vehicle condition area with large controlling effect of controlling wheel load distribution by means of the same parameter to vary control sensitivity according to the scale of controlling effect. CONSTITUTION:A total control device for a ve...

PURPOSE:To prevent speed change property from degradation in normal travel ling by correcting control oil pressure on the basis of a speed change time in the slip condition of a drive wheel. CONSTITUTION:Vehicle speed V1 in speed change output is memorized (S4), while vehicle speed V2 in the completion of the speed change is memorized (S9). When the width V2-V1 of the change exceeds a predetermied...

PURPOSE:To make the shift step of an automatic transmission so as to be turned to a suitable one matched to engine at all times even if the engine power is varied by the changeover of an engine power characteristic. CONSTITUTION:A cam selector control means 12 sets a cam of an engine 1 according to an accelerator stroke AST and car speed V detected by sensors 14, 15 and a shift control means 13 pe...

PURPOSE:To make the speed change stage of an automatic transmission to an optimum stage matching the engine output constantly even though the engine output is changed by converting the engine output property. CONSTITUTION:A cam converting control means 8 decides the cam of an engine 1, and a speed change control means 9 carries out the speed change control of an automatic transmission 2 depending ...

PURPOSE:To improve the control precision of a vehicular controller by assuming the rotary speed of a belt side part considering the relative revolution between the rim side part and the belt side part of a wheel with a tyre and carrying out an anti-lock control based thereon. CONSTITUTION:A rim side part angular speed is detected by an electro-magnetic pickup 12, etc., and a belt side part angular...

A találmány tárgya csőmagőló gépegység (1) tölthető élelmiszertermékettartalmazó, hegesztéssel zárt, aszeptikűs csőmagőlásők főlyamatőselőállítására síkfólia alakú, hegeszthető csőmagőlóanyagból készítetttömlőből, amely tömlőbe az élelmiszertermék be van töltve, és amelygépegység (1) magában főglal egy első és egy másődik lánckőnvejőrt(10, 11), amelyek el vannak látva nagyőbb számú pőfával (12) és...

A találmány szerinti győrsacél tömegszázalékős összetétele akövetkező: szén 2,4 - 3,9 mangán legfeljebb 0,8 szilíciűm legfeljebb0,8 króm 3,75 - 4,75 vőlfrám 9 - 11,5 mőlibdén 4,75 - 10,75 vanádiűm 4- 10 és kőbalt 8,5 - 16, valamint adőtt esetben 2-4 tömeg% nióbiűm ésa maradékban vas és a szőkásős szennyezők. Edzett és temperáltállapőtban a győrsacél keménysége 70 Rc. Edzett állapőtban keménysége70...

A találmány tárgya készülék főnalőrsók mint őrsózógéptekercsek,gőmbőlyagők és kötegek tartókőnzőlra (11) történő felszerelésére,amely egy függőleges (13) rűgalmas kőmpőnessel felfüggesztettrűgalmas, vízszintes rúdból (12), valamint a nevezett függőleges (13)rűgalmas kőmpőnens alsó végéhez kapcsőlt főrgó őrsóból áll. ŕ; This invention concerns a device for supporting yarn windings such as reels, sk...

A system (30, 40, 50) and method are provided for real time subscriber billing at a subscriber location (10) in an unstructured communications network. Account information is stored for at least one subscriber at the subscriber location (10). A determination is made, based on the account information, whether the subscriber has a sufficient balance for a desired service. Service is authorized or de...

In a method for bonding plastic objects together by means of a hot-melt type of adhesive, in addition to or during the heating and addition of a plasticizer-resistant hot-melt adhesive, at least one of the objects to be bonded, is heated up in the area to be bonded beyond the melting temperature of the material of which it is made. The method is particularly advantageous for the joining together o...

PURPOSE:To prevent the flawing of an orientation treated film at the time of rubbing and obtain a liquid crystalline high polymer layer which is free from defects and is uniformly oriented by applying the precursor material of a polyimide resin or the precursor material of the partially imidized polyimide resin on a substrate and subjecting the coating to a rubbing treatment before the complete im...

PURPOSE:To obtain an electroluminescent element having various luminescent hues and good durability by making a layer of an organic compound, held between electrodes, a layer having a composition component of a specific organic compound shown in a formula. CONSTITUTION:X, Ar1, Ar2, R1, and R2 in a formula, showing a specific organic compound, include groups shown in formulas respectively. The Ar1,...

PURPOSE:To obtain the display of high utilization efficiency of light without requiring polarizing plates by combining a 1st liquid crystal display element formed by forming light shielding films larger than a light condensing diameter on the outer side of the glass substrates of a liquid crystal cell having the light condensing effect of the liquid crystal inserted between two sheets of the glass...

PROBLEM TO BE SOLVED: To achieve a bright display with less coloring property, and to prevent a display from being viewed as double-image by using a liquid crystal through which incident light on a liquid crystal cell becomes a linearly polarized light on the reflection plane of a reflection means. SOLUTION: Linear polarized light made incident on a liquid crystal cell through a polarizing plate 2...

The present invention provides an oral pharmaceutical composition in solution form, comprising, a) a therapeutically effective amount of a piperidinoalkanol compound or a pharmaceutically acceptable salt thereof; and b) a suitable solvent systems, comprising propylene glycol and glacial acetic acid.