PROBLEM TO BE SOLVED: To provide an assembling structure that is able to assemble a stator shaft into accurate dimensions and also to secure its sufficient strength. SOLUTION: In a stator shaft 6 to be press-fit toward one end side from the other end side in an inner circumference of an oil pump cover 5 wherein two rotational elements 4a and 4b of an oil pump 4 are set up in the one end side, a la...

PROBLEM TO BE SOLVED: To provide a differential gear that has improved the strength of a clutch member in a conical friction clutch and also seizable resistance in combination. SOLUTION: In a bevel gear type differential gear 1 to be equipped with a differential case 5, a pinion gear 17 in mesh with a pair of output side gears 21 and 21 rotatably supported on a pinion shaft 13 integrally rotated w...

PROBLEM TO BE SOLVED: To provide a differential limiting device with an initial torque generating member adopted in which noise is not produced at all and a stable differential limiting torque is securable at all times. SOLUTION: In this differential limiting device wherein rotative driving force of a differential case 1 is torquedly distributed to both symmetrical side gears 4 and 5 set up on a t...

PROBLEM TO BE SOLVED: To provide a differential limiting device adopted with an initial torque generating part capable of securing a usually stable differential limiting torque under the high differential limiting action, without emitting any noise. SOLUTION: In this differential limiting device wherein rotative driving force of a differential case 1 is torquedly distributed to both symmetrical si...

PROBLEM TO BE SOLVED: To provide a differential limiting device with an inexpensive, simple structural initial torque generating part adopted which is less in the number of part items, and besides, there is no promotion of the occurrence of sound and wear. SOLUTION: In this differential limiting device wherein rotative driving force of a differential case 1 is torquedly distributed to both symmetr...

PROBLEM TO BE SOLVED: To invariably keep the action response of a friction clutch at a high speed by arranging a one-way clutch interrupting the torque in the opposite direction between a torque transfer system transferring the fastening torque to a cam in a differential device fastened with the friction clutch. SOLUTION: This differential device 3 is a rear differential arranged on the rear wheel...

PROBLEM TO BE SOLVED: To make a shaft or the like in a state of being attached with each element of a gear and so on, so as to be takable to the outside of a vehicle, in a state that a transmission body is mounted on this vehicle. SOLUTION: A relatively wide opening 30 is installed in at least one side part opposed in the axial direction of a transmission, and both bearing members 26 and 28 of res...

PROBLEM TO BE SOLVED: To cause a forced downshift so as not to incur an engine stall even if a traction control system is operated by a manual range. SOLUTION: During the inoperativeness of a traction control system(TCS), a shift stage (third speed) at a manual(M) range is permitted at the side of high speed rather than a forced downshift line &alpha , and when exceeding this line &alpha and a ca...

PROBLEM TO BE SOLVED: To eliminate wastefulness of feed water energy, by comprising a feed water pressure control valve which is provided to a water supply system of a heat recovery boiler, and a control operation unit for outputting a valve opening signal to the feed water pressure control valve on the basis of the starting instruction from a feed pump. SOLUTION: A water supply system for connect...

PROBLEM TO BE SOLVED: To provide a solar heat hot water supplier which can let fall water easily to an auxiliary tank without letting the heat medium within a solar heat collector flow out of a solar heat hot water supplier. SOLUTION: In a solar heat hot water supplier comprising a solar heat collector 1, an auxiliary tank 2 for reserving a heat medium, a hot water storage tank 4 with a built-in s...

PROBLEM TO BE SOLVED: To estimate a road surface state with good accuracy. SOLUTION: Respective slip-speed computing parts 20 which are installed so as to correspond to a Dry road surface, a Snow road surface and an Ice road surface compute respective slip speeds on the basis of vehicle speeds from vehicle-speed computing parts 18 and on the basis of a braking force from a braking-force detection ...

PROBLEM TO BE SOLVED: To normally apply aging and to attain stable electric performance by adjusting the moisture quantity in a paste at aging start within a specific range, when electrodes are overlapped for aging. SOLUTION: Ball-milled lead powder is kneaded, while dilute sulfuric acid is being dripped on it to obtain a paste for a positive electrode. This paste is filled in a cast lattice and a...

PROBLEM TO BE SOLVED: To improve the energy density in a lead-acid battery accommodating one electrode plate, having a leg portion and the other electrode plate which has no leg portion in a battery jar having a saddle. SOLUTION: Active material filling surfaces of electrode plates, whose polarities are different, are made to face each other throughout over substantially the entire surfaces. As an...

PROBLEM TO BE SOLVED: To make a wafer cuttable into individual chips including mesas by the mechanical sawing, by removing a mask layer to expose an underlying semiconductor material, and metallizing the tops of exposed mesas and bottom of the wafer. SOLUTION: A wafer 10 includes a bottom p<+> layer 14 forming a planar p-n junction 16, together with an upper n<-> layer 18 covered with an n<+> laye...

PROBLEM TO BE SOLVED: To provide a hybrid drive controller which does not need change of forward/backward motion by using an unlimited variable transmission. SOLUTION: A hybrid drive device has a gasoline engine 1 and a motor- generator 2, the continuously variable transmission which change torque ratios between a primary shaft 8 and a secondary shaft 15, and an unlimited variable transmission 18,...

PROBLEM TO BE SOLVED: To enable easy creep run of a hybrid vehicle, even if the operation state of an engine is stopped so as to make the re-start of the operation of the engine. SOLUTION: A controller which controls the creep run of a hybrid vehicle having an engine 1, a motor-generator 2 and a splitting mechanism 3, when the operation of the engine 1 is stopped has a creep control deciding means...

A machine, for threading and tying threads or cords, employs air pressure and reduced pressure for passing the threads or cords through holes formed by channels in two superposed plates.- DETAILED DESCRIPTION - A machine, for passing threads through superposed channels and for tying them, comprises two plates with channels corresponding to the perforations of a card. The assembly rests on a table ...

L'invention concerne un tambour d'assemblage (1) expansible radialement, pour la fabrication de pneumatique, ayant un corps (10) monté sur un arbre central (2) et présentant une surface de réception (3) des produits à assembler, dont les extrémités ont des diamètres différents, ledit tambour comporte des moyens escamotables (31) susceptibles de se substituer à l'extrémité de la surface de récep...

The diagram is designed for the hydraulic connection of asolar collector to a hot water tank operating under pressure withdirect heating and storage of hot water for residential needs. Itmakes possible to draw out hot water from the reservoir of the hotwater tank and cold water is filled up to replace it through thecollector which enters the lower part of the water reservoir. Inthe circulation due...

Apparatus (10) for inspecting external dimensional parameters of a container finish (12) that includes a light source (16) for directing light energy onto the finish (12) of the container (14) and a matrix array sensor (24) disposed to receive an image of the container finish illuminated by the light source. A telecentric lens (32) is positioned to focus onto the matrix array sensor (24) an image ...