PROBLEM TO BE SOLVED: To provide a hybrid vehicle control device capable of securing the proper amount of regeneration at deceleration. SOLUTION: In the hybrid vehicle control device, which is provided with an engine and a motor, that performs regenerative braking by the motor according to a deceleration state, when a vehicle is decelerated; the engine, which is of a stoppable-cylinder type that c...

PROBLEM TO BE SOLVED: To reduce the influence of partial fractures occurring in a p+-type collector region and an n-type FS region on the on-state voltage characteristic or withstand voltage characteristic of a semiconductor device. SOLUTION: The semiconductor device is constituted in such a way that the n-type FS region which works to suppress the extension of a depletion layer is formed in an n-...

In manufacturing a tire containing a sealer, an outside liner is adhered to the inner surface of a body of the tire, and an inside liner is adhered to the inner surface of the side wall of the tire body at both the right and left sides of the liner, to thereby provide a space for filling a sealer between the central portion of the inside liner and the inner surface of the outside liner. Since the ...

PROBLEM TO BE SOLVED: To provide a photosensitive resin laminated for a sign plate to be used for display panels, decoration shields, name plates, Braille display boards or the like, in which the supporting body is colorless and transparent, excellent in designing property and has a low coloring rate by UV rays and excellent light resistance. SOLUTION: The photosensitive resin laminate for a sign ...

PROBLEM TO BE SOLVED: To provide a user interface designing apparatus capable of easily designing such a user interface as changing an indication part according to the state transition to an event by adding and deleting the states and editing the indication part and event process in each state. SOLUTION: This system is provided with a state set editing means 10 adding and deleting the state of a c...

PROBLEM TO BE SOLVED: To provide an IC ticket, which can specify a visitor in various sites and enable the visitor to pay the charge for use of equipment in sites and a management system using the IC ticket. SOLUTION: The IC ticket is used which is provided with an IC chip where ticket data are recorded and an antenna for transmission and reception of data recorded in the IC chip. When the visitor...

PROBLEM TO BE SOLVED: To reduce the number of parts, to simplify a reader structure and to make the reader thin. SOLUTION: The contacting part 43 of a contact unit faces inside a card insertion path formed by the top plate 21 of a lower case 2 and the bottom plate 31 of an upper case 3. An engaging part 52 is provided at one end of a lever 50, the other end of which is attached pivotally to a slid...

PROBLEM TO BE SOLVED: To provide a feeding device for a stage which is compact and has high feed precision. SOLUTION: This feeding device for the stage is provided with a guide which restricts the vertical direction of the stage for both wings and a driving part is arranged nearby its inside center; and a measurement part is provided by it closely and a horizontal guide is provided nearby the driv...

PROBLEM TO BE SOLVED: To provide a pattern correction method capable of easily and accurately correcting a pattern and enduring in practical uses and a pattern correction device for performing the same in a plate making process of a shadow mask manufacturing line. SOLUTION: In this pattern correction method to obtain a corrected pattern plate, a pattern plate has patterns of a roughly same designa...

PROBLEM TO BE SOLVED: To realize such a dust core that can keep a magnetic characteristic even when it is used in a high-temperature environment and shows no reduction of strength or no dimensional change, and can endure cutting or the like. SOLUTION: This dust core is formed by joining an iron powder or an iron powder whose surface is covered with a phosphate compound film, with a resin. The join...

PROBLEM TO BE SOLVED: To provide vehicle-mounted equipment for narrow-band communication (DSRC) in a powerful road traffic system in which transmission output and reception sensitivity are stable. SOLUTION: The vehicle-mounted equipment 2a for DSRC for receiving and sending information between road equipment, installed at a road side and vehicle-mounted equipment mounted on a car, has an output le...

The boot rear retaining element comprises a slide (7), a body (3) with a movable retaining jaw (4) and a return spring connected to a body retaining lock by a rod. The rear end of the rod comprises a fold inserted between the rear end of the spring and the rear wall of a cavity. A boot release lever (6) allows the jaw to be opened. An interface wedge (8) is inserted between the slide and the ski u...

Heterogeneous, solvent- and plasticiser-free polyvinyl esters (I) with a min. film-forming temp. (MFT) of below 10 degrees C, in dispersion or powder form and stabilised with protective colloids, contain (A) a homo- or copolymer with a Tg of above 20 degrees C, derived from (a1) 85-100 wt.% vinyl 1-18 carboxylate ester(s), (a2) 0-5 wt.% alpha , beta -unsatd. carboxylic acid(s), (a3) 0-5 wt.% mono...

Biodegradable foamed plastic material having a bulk density comprised within the range of from 5 to 13 kg/m<3>, comprising: -- 30-99.5 by weight of polisaccharide containing more than 50% of thermoplastic starch or starch complexed by polimeric structures, having an intrinsic viscosity (in DMSO) lower than 1.3 dl/g and less than 20% by weight of soluble fraction in ethanol; -- 0.5-70% by weight ...

A heat-insulating constructional material based on an alkalized and flooded siliceous raw material fabricated by comminuting solid ingredients and mixing all the raw ingredients, steaming a raw mixture and thermally bloating intermediate products obtained from the steamed raw mixture is designed for utilisation as warmth-keeping fills and light-weight concrete aggregates (in a particulate form) an...

A petroleum well (20) comprises a well casing (30), a production tubing (40), a source of time-varying current (68), a downhole chemical injection device (60), and a downhole induction choke (90). The casing (30) extends within a wellbore of the well (20). The tubing (40) extends within the casing (30). The current source (68) is located at the surface. The current source (68) is electrically conn...

A petroleum well (20) comprises a well casing (30), a production tubing (40), a source of time-varying current (68), a downhole tracer injection device (60), and a downhole induction choke (90). The casing (30) extends within a wellbore of the well (20). The tubing (40) extends within the casing (30). The current source (68) is located at the surface. The current source (68) is electrically connec...

A petroleum well having a communication system and a hydraulic system is provided. The petroleum well includes a borehole and a piping structure positioned within the borehole. The communication system supplies a time varying electric current downhole along the piping structure. The hydraulic system, which is positioned downhole proximate the piping structure, receives the time varying current to ...

A gas-lift petroleum well and method for producing petroleum products using downhole pressurized gas to provide lift. The gas-lift well having a well casing, a production tubing, a packer, and a gas-lift valve. The well casing extends within a wellbore of the well, and the wellbore extends through oil and gas zones. The production tubing extends within the casing. The tubing having an opening form...

Apparatus and methods of electrically controlling downhole well interval inflow and/or injection. The downhole controllable well section (71) comprises a communications and controle module (80), a sensor (82), an electrically controllable valve (84), and an induction choke (90). The electrically controllable valve (84) is adpated to regulate flow between an exterior of the tubing (40) and an inter...