PURPOSE:To dispense with aging of a negative plate and simplify manufacturing process for a battery by applying and fixing separators to both sides of a negative plate just after filling paste. CONSTITUTION:A belt-shaped lattice 1 is passed below a filler 3 so as to make a plate filled with negative electrode paste 4. Thereafter, the paste is removed at fixed intervals by a device 5 which removes ...

PURPOSE:To dispense with aging of a negative plate and simplify manufacturing process for a battery by heat-welding or fixing, with thermoplastic resin, separators after applying them on both sides of a negative plate just after paste filling. CONSTITUTION:An expansible lattice 1 is filled with negative paste 3 and next, the paste is removed at fixed intervals in rectangle. A belt-shaped separator...

PURPOSE:To avoid controlling under a low load due to unnecessary gear reduction, by avoid calculating or renewing the control reference values under condition of low rotation of the engine and throttle operation. CONSTITUTION:When the rotation of the engine drops, the standard reference values to be obtained from the movement of the control rack are not calculated or renewed, while the throttles a...

PURPOSE:To utilize engine brake effect to the maximum by providing an up-shift holding means for stopping operation of a down-shift means so far as a vehicle is in accelerating state when up-shift is made through an up-shift means. CONSTITUTION:When a vehicle is accelerated in engine brake range, an up-shift speed change means functions to carry out up-shift speed change with predetermined engine ...

PURPOSE:To prevent the line oil pressure from being excessive by making the pressure receiving surface for two oil pressures exerted on the spool valve prece of a pressure adjusting valve into a predetermined size. CONSTITUTION:A first pressure adjusting valve 100 is equipped with a spool valve piece 140 a spring seat 142, return spring 144 and a plunger 146. The spool valve piece 140 is adapted t...

PURPOSE:To improve the running ability on high land by changing the speed change peculiarity depending upon whether on the ordinary land or on the high land through an air pressure signal from an altitude detecting means. CONSTITUTION:An altitude sensor 60 is provided on the control unit of a driving system consisting of an electromagnetic clutch combined with a belt type continuously variable tra...

A yarn-selecting device of a knitting frame comprises a mechanism for joining the yarn being knitted to a selected yarn to be knitted, which mechanism comprises a swivelling finger for forming a closed loop of the yarn to be knitted. Two levers form an open loop of the yarn being knitted and insert it through the closed loop of the yarn to be knitted on the finger. A hooking lever is provided for ...

In a method and device for filtering a suspension of particles in a liquid the liquid is passed continuously through a porous membrane, particles from the suspenion gradually accumulating on the membrane and clogging its pores. The filtered liquid is caused to flow momentarily in the reverse direction to return the accumulated particles to the suspension and so unclog the membrane. To achieve this...

In the case of a multipurpose cutting machine there are provided on the profile guiding body (1) an unlocking key (3) and a diametrically opposed recess (13) in the sliding plate (11) into which the locking key (3) locks when actuated against the resistance of a spring in the zero position of the stop plate, a locking pin (6) which is coupled to the key (3) giving up its locking position with resp...

The dewatering of the paper web (1) takes place by means of a flow of steam led through the paper web (1) in a press nip (2) between two pressing surfaces (3 and 4) under such pressure that at least part of the paper web (1) becomes saturated. In order to effect this flow of steam, means are introduced in the area of the press nip (2) to guide the flow of steam from the upper to the under surface ...

A device for monitoring the thread supply in a thread-feeding device for textile machines has two measuring circuits (55, 56), of which one processes signals characterising the rotational movement of a rotatable element, for example a thread-feed roller (4), coupled in a non-slip manner to the thread (16) and the other measures the set desired thread-tension value of a desired-value transmitter (2...

Remote-controlled shears for cutting up irradiated nuclear fuel rods into segments with a moving shear blade (1) having a cutting edge (18) roughly at right angles to the axis of the rod or rod bundle, and a bushing (2, 3) which is divided into two parts and holds blade (1) with the shear blade slide-mounted in it. Furthermore, it has an infeed device for the rods (12) whose location holes (9) mat...

The invention relates to polymers of formula (I) (I) in which R1 and R2 represent optionally substituted alkylene, cycloalkylene or phenylene radicals, A represents hydrogen or carboxyl groups, B represents hydrogen or groups derived from carboxylic acids or isocyanates. The invention also relates to aqueous epoxy resin dispersions containing one or more polymers of general fo...

A device for sensing the number of items (14) consecutively disposed in a compartment (12), preferable bottles or cans disposed in a beverage magazine (13) in a refrigerator (10). At each item (14) at opposite sides of said item electric conducting areas (20a, b, c; 21a, b, c) are provided which form a capacitor (22a, b, c). The capacitors formed in each compartment are interconnected to form a ci...