A green radial tire carcass manufd. by (i) transforming a cylindrical carcass ply into a wave-shaped corrugated carcass ply ; (ii) placing a pair of bead cores in the ply ; (iii) normalising the ply into its cylindrical shape; (IV) expanding the carcass ply; and (V) bending they ply around the base cores. After assembly of the cylindrical carcass layer, a toroidal shape is formed.The dimensional a...

PURPOSE:To prevent torque transmission efficiency from being deteriorated in travelling as well as a synchronization device from being worn as possible by providing on the synchronization device an adjusting mechanism for producing drag torque. CONSTITUTION:A rotation operating mechanism has a lever 14 fixedly mounted on a shaft 8 projecting from a shift lever housing 1, a link arm 15, a spring 16...

A continuously operating screw centrifuge for separating solids containing liquids with a rotatably drivable centrifuge drum containing a screw conveyor (19) rotating with a differential speed compared with the drum shell (5) has a first planetary gear (1) driven by means of a main drive motor (2) for driving the drum shell and the screw conveyor. A second planetary gear (6) is associated with the...

A method is disclosed for achieving improved reduction efficiency and economy in the reduction of particulate metal ores, e.g. iron ore, in a vertical shaft, moving bed reactor having a reduction zone in which a heated reducing gas is caused to flow through a portion of the ore bed to reduce the metal ore thereof to metal; e.g. sponge iron. The improved efficiency and economy is achieved through a...

A bead-lock device for a type-forming drum includes mutually separable and engageable shafts, a pair of left and righ bead-lock members (c,d) each consisting of a number of segments, and a right and left slide member(11) adapted to move in the axial direction of the shafts. Each member is connected to the segments through a link mechanism(13) so as to expand and contract the segments in a radial ...

A coating compsn. is claimed that is rapidly curable at room temp. in the presence of a vaporous tertiary amine catalyst and has a pot life of at least 4 hrs. in an open pot. Compsn. comprises (1) an aromatic, hydroxyl-functional condensn. prod. made by condensing (a) a linear aliphatic dibasic acid, (b) a linear aliphatic glycol, (c) a combination of a linear aliphatic glycol and aromatic dicarbo...

PURPOSE:To easily and accurately inspect the configurational deformation flaw of a pin, by irradiating the bottle mouth of a bottle conveyed while rotating with light and measuring the width of the bottle mouth by the output signal obtained by the photoelectric conversion of regular reflected light from the bottle mouth. CONSTITUTION:The bottle 1 conveyed by a bottle conveyor 8 is moved on the con...

PURPOSE:To take out the flaws of a bottle mouth part and a top surface part in a separated state, by providing a second photoelectric converter, which applies photoelectric conversion to regular reflected light from the bottle mouth part, to the outside of a first photoelectric converter for applying photoelectric conversion to the scattered light from the flaw formed to the bottle mouth part. CON...

1. A holding member for detachably holding a pole, more particularly a parasol or washing line pole, which holding member is provided with a vertically extending guide tube (1), characterised in that in the region of the pole insertion end of the guide tube (1) therein a contact member (3) is provided which acts resiliently transverse to the longitudinal axis (2) of the said tube and in the region...

A hazardous ammonium jarosite based sludge is solidified by the addition of cement and fly ash under mildly basic conditions, pH 10+/-1.5. The ammonia does not have to be driven off prior to solidification.

A rubber material laminated with nylon resin is produced in combination with a rubber material layer, an adhesive reinforced layer and a nylon resin layer, thereby enabling a very strong adhesion between the rubber material layer and the nylon resin layer. The rubber material comprises a rubber material layer mainly made of acrylonitrile-butadiene copolymer rubber, an adhesive reinforced layer whi...

A freely standing thin pellicle film of cellulose acetate butyrate is formed by spinning on a rotating substrate. After forming, the film is lifted off of the substrate and secured to a metallic frame. The pellicle is for use in the mid ultraviolet range of 280 to 360 nanometers, but can be used also in the deep ultraviolet range, e.g. wavelengths as low as about 240 nanometers. The pellicle preve...

A transmission control apparatus of an infinitely variable transmission (103) for electronically controlling the operation of the infinitely variable transmission (103) in response to transmission control information including a throttle opening position, etc., calculates a transmission operation command value by looking up a transmission control information-control command value conversion storag...

An inductor included as part of a pulse width modulation amplifier is formed by four coils 9A, 9B, 9C and 9D arranged alongside each other and connected in parallel. The coils are supported against electromotive forces tending to pull them together by insulating strips 10. The coils are enclosed within an electromagnetic shield formed by a cabinet 1. Because of the arrangement of the coils the mag...

A process for incorporating one or more additives, such as pigment, dye, stabilizer, antioxidant, and hardener, into the surface of a manufactured article based on a chloro-vinyl polymer, in particular polyvinylchloride, by coating the surface of the manufactured article with at least one polymeric film containing the additive or additives dispersed or dissolved therein.

Composition which comprises a mixture of (A) a specified polydiorganosiloxane having a viscosity of from 200 to 100,000 cP at 25 DEG C and having at least two silicon-bonded vinyl groups, (B) a specified organohydrogensiloxane, (C) a platinum catalyst, (D) a substance which inhibits the reaction between (A) and (B) in the presence of (C) e.g. an acetylenic alcohol, and (E) 0.2-10% by wt. of a blow...

An expandable polymeric vinyl aromatic, e.g. poly styrene, particle is provided which contains a blowing agent, 0.1-0.5% bis (allyl ether) of tetrabromobisphenol A and 0.5-2.5% of dibromoethyldibromocyclohexane. The additives can be incorporated during impregnation with the blowing agent or by blending with the expandable particles after impregnation. Molded foamed articles can be produced exhibit...

An improved expandable polymeric styrene particle is provided containing a blowing agent, a minor amount of pentaerythritol tetrastearate, overcoated with a minor amount of glyceryl monostearate. The improved particle results in a significantly reduced final mold cooling cycle in producing the finished molded article. Pentaerythritol tetrastearate is preferably incorporated during impregnation wit...

A rubber material laminated with nylon resin is produced in combination with a rubber material layer, an adhesive reinforced layer and a nylon resin layer, thereby enabling a very strong adhesion between the rubber material layer and the nylon resin layer. The rubber material comprises a rubber material layer mainly made of acrylonitrile-butadiene copolymer rubber, an adhesive reinforced layer whi...