PURPOSE:To improve the adhesion and endurance between treatment agent and a bladder by a method in which rough surface is formed on the surface of the bladder, and the bladder-treating agent composed of high molecular weight silicon liquid, crosslinking agent, crosslinking-acceleration agent of specified amounts and the specified silicon coupling of specifying amount, is used. CONSTITUTION:The sur...

PURPOSE:To prevent slipping of wheels on an icy snow passage so as to perform smooth reverse start by constituting an automatic transmission in such a manner as decreasing engine output when it is set in a reverse range and an winter mode. CONSTITUTION:The reverse range as well as the winter mode of an automatic transmission are selected by a driver, respective switches 3, 4 are set ON. Respective...

PURPOSE:To prevent generation of remarkable speed change shock by stopping an output-decrease operation when the speed change by an automatic transmission is performed during the output-decrease operation, in the case of decreasing an engine out the time when racing occurs at a driving wheel. CONSTITUTION:Racing (slip) of a driving wheel is detected based on respective detection results of driving...

PURPOSE:To lengthen water replenishing intervals, to save electricity, to restrain temperature rise, to realize a high capacity battery, to prevent electrolyte stratification, and to increase reliability, by using a battery equipped with an electrolyte stirring unit and by limiting the charging amount to a necessary minimum value. CONSTITUTION:The lower end of an electrolyte stirring unit D is pos...

In engine torque control in a motor vehicle having an engine and a stepping type of transmission, input and output speeds of the transmission are constantly detected by sensors disposed in input and output portions of the transmission, thereby obtaining a gear ratio (measured value) of the transmission. If the ratio of the difference between this gear ratio and a predetermined gear ratio before th...

A sheet tail catching device for sheet delivery systems having a non-stop auxiliary stacking device on sheet rotation printing machines is described, in which a plurality of catching fingers (5) which are arranged at a distance from one another at the same height can be moved backwards and forwards parallel to the course of the sheets by means of a motor drive in a guide (11) when the auxiliary st...

A catching device for the front edge of sheets in the sheet delivery apparatus of a sheet printing machine is described, in which apparatus stacking stops (4), which can be folded away, for the front edge of the sheets which can be conveyed onto a sheet stack (3) and catching fingers (10) which can be inserted at the same time in parallel with the plane of the sheets from the front edge of the she...

Composite material containing a thermoplastic matrix and a fibrous filler. The fibrous filler of this composite material comprises fibres of animal origin containing at least 2 % of fats, especially animal fats, and more particularly wool fibres. The insulating properties of this material enable it to be used widely, especially in the field of the building industry. ; L'invention concerne u...

A textile yarn bobbin winder consists of a feeder (1) for the bobbin rollers, made in the form of a chamber which holds the rollers (2) in a single file to provide a continuous circulation. The yarn is fed to the next roller to be wound by an articulated arm with an oscillating plate, and the feeder makes an angular movement before and after receiving a new roller. The next roller to be wound leav...

A bobbin tube support in the form of a framework fitting inside the tube and a resilient clamping element engaging the external surface of the tube.

A device for pocketing plates for accumulators in separators has a supply coil (1) from which a separator strip (6) is drawn and conveyed in a vertically running channel (10) to an end stop (20). In the channel (10) there is provided a slot through which a folding plate (40) (on which a plate is placed by a plate layer (24)) can be pushed, folding and pushing out the piece of separator strip. The ...

A plate (1) mountable on the base of a bin-type container (2) and advantageously profiled with transverse projections (3,4,5,6) to provide the first layer of bobbins with stability against rolling, and also ensure that the subsequent filling takes place in accordance with precise storage configurations in order to obtain a considerable storage density. The profiling of the removable plate (1) is u...

A method of reducing image artifacts in tomographic, projection imaging systems due to periodic motion of the object being imaged includes the acquisition of a signal indicative of the periodic motion. This signal is used to identify a quiescent period in the periodic motion so that the acquisition of projection data may be coordinated to be centered within the quiescent period. The sequence of th...

PURPOSE:To decrease the cost and realize a high moisture resistance reliability by providing a black adhesive tape, a moisture absorbing layer consisting of polymer including moisture absorbing powders, and a moisture preventing sheet of organic resin film laminated on both surfaces of a metal foil on an electroluminescent element. CONSTITUTION:A thin film electroluminescent element 1 is formed on...

PURPOSE:To obtain uniform light emission characteristics and decrease defects by forming an organic film on an upper insulation layer before eliminating a film at peripheral zones of a substrate for protecting the upper insulation layer. CONSTITUTION:A transparent electrode 2 is formed on the surface of a glass substrate 1, and a lower insulation layer 3 is formed on it along the whole surface. A ...

PURPOSE:To prevent breakage or fusion of a back electrode by forming it in such a way that adjacent light emission layers are put on each other only for a little at pattern end parts, and that the protruding parts put on each other are formed in gentle steps by a plasma etching method. CONSTITUTION:A transparent electrode 2 is formed on a glass substrate 1, and an insulation film 3 of metal oxide ...

A method for regulating the flow of liquid metal to an atomization zone is provided. The regulation is effected by imparting a high density flux to a stream of liquid metal as it descends toward the atomization zone. The high density flux is applied by a flux concentrator. The flux concentrator is a small sleeve-like element attached by parallel conductors to a larger sleeve-like element which act...

A holder 1 for use in supporting a hand held hair drier from a stand 2 and being operable by one hand 22 only of a user to receive a hand-held hair drier held in the other hand of a user. The device comprises spring biased jaws 3 and hand gripping parts 5. It is attached to a vertical stand 2 by means of a clamping device 29. The stand may comprise a heavy base 36 to which the vertical member is r...

This invention relates to polyethylene terephtalate compositions comprising a reaction product of a PET resin and 0.05 to 5.0 WT % of a copolymer of maleic anhydride, optionally together with pyromellitic dianhydride. These compositions have improved melt strengths, which allow to apply them especially for extrusion blow-moulding and foam extrusion.

A timer circuit includes a counter circuit that continuously provides an output of an iteratively increasing sequence of bits. The timer includes a timeout data circuit that forms a timeout data word from a specified time period and a first counter circuit output. A register is provided that stores the timeout data word at an address formed from a second counter circuit output. A comparison circui...