PURPOSE:To aim at improving the acceleration by constructing a controller for reducing the slip of driving wheels at the time of detecting the slip such as to perform the engine output reducing control according to the lower one of the driving wheel speed. CONSTITUTION:The title device is provided with driving wheel speed sensors 11, 12 and driven wheel speed sensors 13, 14, and the slip quantity ...

PURPOSE:To prevent the slip of driving wheels at the time of acceleration by braking the driving wheels when the slip of the driving wheels is detected as well as controlling the throttle opening such as to obtain the torque corresponding to the state of the road surface and the slip. CONSTITUTION:The title device is provided with driving wheel speed sensors 11, 12 and driven wheel speed sensors 1...

PURPOSE:To enable to inhibit the generation of slip and improve the turning performance by increasing the value of the coefficient Kp in calculating the proportional correction torque TPn in case of the slip DV>0 so as to increase the gain to such an extent that the control does not become unstable. CONSTITUTION:The title device is provided with driving wheel speed sensors 11, 12 and driven wheel ...

PURPOSE:To heighten the responsiveness at the time of controlling the acceleration slip by increasing the coefficient Kp in calculating the proportional correction torque in case of the slip being inhibited so as to increase the gain. CONSTITUTION:The title device is provided with driving wheel speed sensors 11, 12 and driven wheel speed sensors 13, 14, and in a traction controller 15, the reducti...

PURPOSE:To make it possible to perform optimum output control corresponding to the operational conditions of a vehicle and the shifting characteristics of an automatic transmission by increasing the control variable of an engine output control means as the change rate of engine revolutions and the like are great. CONSTITUTION:In an engine control unit 9, the change rates of engine revolutions and ...

A centrifuge is disclosed designed either as a solid bowl centrifuge or separator for separating solids/liquids mixtures. A centrifuge drum having an outer jacket is provided with apertures positioned in the jacket. Through the apertures at least a partial discharge of concentrated solids phase occurs thereto. A control device preferably in the form of a disk provides a surface spaced at a small i...

PURPOSE: To improve adhesive property by using a sheet having a specific component in an intermediate layer to give improved optical stability and excellent thermal stability, thereby eliminating embrittling of a foam. CONSTITUTION: A sheet of an intermediate layer of a molded article contains components A, B, C and D. An organic polyisocyanate of the solid component A at the ambient temperature i...

An armchair or sofa-bed frame comprising a plurality of frame portions connected to each other by a pair of J-shaped rods (22, 30). First rod (30) is pivotally connected, at the end of curved portion (36) thereof, to frame base (10) and, to an intermediate position thereof, there is pivoted a rod (34) which is provided, at the opposite end thereof, with a slot (46) wherein there is slidably engage...

This invention provides improved seating for vehicles having cramped space for operators. A tubular frame (12) is disposed to the periphery of backrest and seat members (13), (14). The backrest slides and pivots with respect to the frame and is pivotally attached to the seat. Pivot blocks (34) fixed to the seat underside selectively engage a frame bearing shaft (24) to hold the backrest and seat a...

An apparatus for splitting animal carcasses (C) being conveyed by an overhead conveyor (103), which includes a tracking carriage (17) engaging the carcass to be split, and being shiftable in the direction of movement of the carcass (C). A lateral feed carriage (39) is mounted on the tracking carriage (17) for movement relative thereto towards and away from the carcass to be split. A positioning pl...

A process for the preparation of stable aqueous aldehyde resin dispersions and for the production of surface coating binders. For this purpose, a melt or highly concentrated solution of a polycondensate of urea and a CH-acidic aldehyde, with or without formaldehyde, is dispersed in water in the presence of an organic protective colloid and, if required, an emulsifier. These aqueous resin dispersio...

A disc brake assembly is provided with a plate which cooperates with a pair of pistons to prevent rotation of one of the pistons relative to the caliper. The plate is further designed to act as a heat shield for a boot assembly associated with the piston.

PURPOSE: To form a porous adhesive reinforced layer by bonding an incompatible polymer by treating at least one surface made of substantially PVDF to enable it to adhere to the incompatible polymer. CONSTITUTION: For example, a preheated extruded PVDF polyvinylidene fluoride plate is coated by a brush with 10 wt.% PVDF solution in a dimethylformaldehyde. PVDF powder is sprayed on a coated surface,...

PURPOSE:To obtain an oxide superconductor having an oxygen-deficient type perovskite structure excellent in superconductive characteristics with good reproducibility by introducing twins in a specific state into crystal grains in phase transition from a tetragonal to a rhombic phase. CONSTITUTION:Twins are introduced into crystal grains so as to intersect at about 90 deg. from >=2 [110] orientatio...

PURPOSE:To enable formation of an inexpensive and homogeneous patterned superconducting thin film without requiring etching operation composed of thermally decomposable compounds containing superconducting substance constituent elements, rosin and solvent as main constituent elements in an ink. CONSTITUTION:An ink for forming a superconducting thin film obtained by mixing thermally decomposable co...

PURPOSE:To obtain an oxide superconductor satisfying all of the high Tc, isotropic electric conductivity and stability in air by adding an element capable of assuming a valence of 4 to an oxide, containing only Y or La and Cu in a trivalent state and having an ABO3 type perovskite structure. CONSTITUTION:The above-mentioned oxide saperconductor has an ABO3 type perovskite structure of an apparent ...

PURPOSE:To obtain a high-temperature oxide superconducting substance, having a prescribed composition formula and nigh critical temperature by primarily and secondarily calcining a mixture of respective compounds of Sr, Cr, Bi, Cu and W under specified conditions. CONSTITUTION:Compounds of Sr, Ca, Bi and Cu and W are mixed. The resultant mixture is primarily calcined at 750-820 deg.C temperature i...

PURPOSE:To obtain a high-temperature oxide superconducting substance, having a prescribed composition formula and high critical temperature by primarily and secondarily calcining a mixture of respective compounds of Sr, Ca, Bi, Cu and Pb under specified conditions. CONSTITUTION:Compounds of Sr, Ca, Bi and Cu and Pb are mixed. The resultant mixture is primarily calcined at 750-820 deg.C temperature...

PURPOSE:To obtain the title superconducting oxide film of higher critical temperature formed on a substrate by replacing Cd for part of the Ca of a Bi-Sr-Ca-Cu- O-based superconducting oxide. CONSTITUTION:1-9atom% of Cd (based on the metallic atom) is added to a Bi-Sr-Ca-Cu-O-based superconducting oxide; or Ca is replaced by Cd for part of the Ca in a superconducting oxide having a composition Bi2...

PURPOSE:To obtain the title superconductor high in volume rate of high- temperature phase using such as element as to be relatively easy to control the amount to be added and be safe in terms of physical properties by replacing In at a specified range of amount for the Bi in a high-temperature superconducting oxide with Bi-Sr-Ca-Cu-O as basic constituent elements. CONSTITUTION:>=1.0wt.% but <6wt.%...