PURPOSE:To enable a paste having a stable composition to be easily obtained without causing any need of the dehydration or the like of a recycled paste, by adjusting the specific gravity of the recycled paste in a recycle jar. CONSTITUTION:Recycled water which has been used in packing a paste is poured into a recycle jar 1 from the top of the jar 1, and the supernatant of the recycled water is rem...

PURPOSE:To detect the runaway of a microprocessor precisely by detecting the runway on the basis of a signal indicating access to a program area or another area and a status signal outputted during instruction fetching. CONSTITUTION:When the microprocessor 1 is operating normally, a program area in a memory is accessed during instruction fetching, but an area other than the program area is accesse...

PURPOSE:To prevent an apparatus to be controlled from damage even if a memory or the like is failed by storing a reset instruction word in a prescribed position of an instruction word stored in the memory and resetting a timer on the basis of the instruction. CONSTITUTION:When executing a counter reset instruction, a CPU1 generates a reset signal 5 to reset a counter 8a. If short or the like of a ...

PURPOSE:To obtain a multicore superconductive wire which does not cause any a.c. loss and is stable by diffusing one of the structural materials for a superconductor compound in high-purity metal, alloying the high-purity metal partially and isolating the high-purity metal with this alloy and discontinuous barriers.

A grease composition suitable as a lubricating sealant which is resistant to aprotic solvents such as chloroform and carbon disulfide comprises glycerine, fumed silica, polyethylene glycol and a minor amount of water. A preferred grease composition is one in which the amount of glycerine ranges is from 50 to 95 weight % of the total composition, the amount of fumed silica is from 1 to 25% by weigh...

PURPOSE:To switch automatically a controlled device under off-line control by disconnecting an internal control circuit of a controlled device from a control bus, leading said circuit into an off-line control device and changing the order of device addresses to access the device. CONSTITUTION:When a training simulator 4 is connected to a switchboard 3 by inserting a plug, an interface circuit 42 d...

PURPOSE:To prevent an IC card from illegal use by using the IC card as an effective one for transaction only when a transaction enabled code is set up on a recording area of the IC card by a card holder making a pair with the IC card. CONSTITUTION:Receiving power supply from the card holder 6, the IC card 1 waits (n1) the input of data. Since the initial data from the card holder 6 is card holder ...

PURPOSE:To prevent an IC card from illegal use by using the IC card as an effective one form transaction only when a transaction enabled code is set up on a recording area of the IC card by a card holder making a pair with the IC card. CONSTITUTION:Receiving power supply from the card holder 6, the IC card 1 waits (n1) the input of data. When card holder cipher data are received as the initial dat...

PURPOSE:To improve reliability by bonding a semiconductor pellet onto a film circuit substrate, connecting the pellet to a conductor on the film circuit substrate through wire-bonding and forming a protective coating on the pellet and the conductor by phenol resin and a film by silicone group resin. CONSTITUTION:A semiconductor pellet 2 is bonded with a predetermined section on a film circuit subs...

PURPOSE:To reduce a burden of a person in charge by setting and registering a system constitution of an automatic machine, and also providing a centralized monitor and control means of an automatic machine on a sub-controller. CONSTITUTION:A system constitution setting part 21 of a control part 15 of a sub-controller SC14 of a district center 11 registers a logical machine kind registration, a sys...

A golf cart propelling system includes a rail formed by a plurality of channel members, each having a U-shaped cross section defined by spaced side walls joined at lower ends thereof by a bottom wall. The side walls have at upper ends thereof flanges extending inwardly toward each other and defining therebetween a longitudinal groove. The channel members are buried in the ground to define a rail e...