PURPOSE:To open the front side and facilitate the takeout of the paper loaded by blanking and pushbutton operation or the like, by extruding a blanking plate on a plate receiving guide onto a guide rail at the side of a paper discharger with an extruder so as to perform a sampling job. CONSTITUTION:When several sheets of blanking plates 8 are loaded in pile on a plate receiving guide 32 and printi...

PURPOSE:To make clutch not to be set in engagement even if any failure occurs in an electric power supply by making an electromagnetic valve for starting a normally closed type. CONSTITUTION:An automatic clutch device 4 has four electromagnetic valves 14-17 and a double check valve 18, and electromagnetic valves 14-16 are of a normally closed type and the electromagnetic valve 17 is of a normally ...

PURPOSE:To reduce an oil pump loss, by providing a selector valve in a pulley control oil line and opening an oil path by the selector valve in the time of continuously variable driving while regulating a line pressure by a pulley controlling solenoid valve even in the time of directly coupled driving. CONSTITUTION:A pulley controlling solenoid valve 171, start controlling solenoid valve 172, dire...

PURPOSE:To promptly further surely release a belt slip, by increasing thrust force in a pressure oil chamber by a fixed value to suppress the belt slip, after it is detected, thereafter gradually decreasing the thrust force in the pressure oil chamber. CONSTITUTION:A reference value NX, for detecting a belt slip, is set in the vicinity of an upper limit value, and in a range with an input speed in...

PURPOSE:To enable shockless switching to be attained, by changing a capacity of transmission torque of a starting clutch in accordance with a rotary speed difference or speed ratio before and after the clutch when a transmission is switched to its continuously variable driving from directly coupled driving. CONSTITUTION:Signals from an engine speed sensor 164, car speed sensor 165, driven shaft sp...

PURPOSE:To smoothly perform switching further to improve efficiency, by controlling speed ratio of a continuously variable transmission means so that an interrupted connection part relative speed in a joint means, arranged in the other side continuously variable transmission means, decreases to zero, when the continuously variable transmission means is switched. CONSTITUTION:A speed Ne of an engin...

PURPOSE:To prevent feed hot water in a heat accumulating tank from being stored in a laminar temperature distribution state irrespective of a fluctuation in open air environment, by providing a hot gas bypass circuit, in which a pressure reducing mechanism is located, and a during-defrosting-operation suction circuit in which a solenoid valve is located. CONSTITUTION:During defrosting operation, a...

Hammer crusher which comprises a revolving rotor (2) and one or several hammers (4) attached to the rotor as pivotable relative a shaft (5 or 9) parallel to the axis of rotation of the rotor. In the frame of the rotor, facing each hammer, there is a recess parallel to the radius of the rotor so that the hammer can pivot round its shaft over 360.degree.. The recess facing each hammer (4) extends, i...

A machine for use in making a battery comprises a stack station (10), a transfer stage (11), a strap and terminal casting machine (12), a boxing station (13) and a return transfer stage (14). Cassettes (15) incorporating the accumulator plates (19) and acid bearing medium (20) are made up at station (10) and loaded into the casting machine (12) on two supports (24, 26). Intermediate these supports...

Improved gasoline compositions containing a minor amount of a polyalphaolefin having a viscosity at 100 DEG C from 2 to 20 centistokes, and optionally also an aliphatic polyamine, an alkali or alkaline earth metal salt of a succinic acid derivative, and/or a polyolefin; together with a concentrate for the production of such gasoline composition and a method of operating a spark-ignition engine usi...

A multispeed winch or gear box wherein an axially-movable gear located on a shaft parallel to the drive shaft is movable by operation of a lift mechanism to be in a first position in engagement with a specific gear train or in a second position out of engagement with the gear train. Further, the winch or gear box can have a gear on the drive shaft with a lip or shoulder which can retain the axiall...

Water container which can be fitted to a parasol pole. This container is divided into two independent parts 6, joined together by hinges 1, which will form the cylinder. Two hermetic lids are located above each part, by means of which the desired liquid and the ice cubes will be introduced. The system for closing the container is simple : the pole of the parasol is simply inserted into the opening...

The invention relates to a method of regulating the temperature of a central heating installation. The installation comprises in particular a boiler 1, ducts 2 for the distribution, in a closed circuit, of a heat-carrying fluid to different heating points 3 such as radiators, convectors or heated floors and a circulation pump 4 for the said heat-carrying fluids. According to the method of the inve...

SYSTEME POUR LE GUIDAGE D'UN CHARIOT AUTOMOTEUR 1 LE LONG D'UN TRAJET NON MATERIALISE T SELON UN DEROULEMENT TEMPOREL PREETABLI.

SELON L'INVENTION, CE SYSTEME COMPORTE :

- AU MOINS UN DETECTEUR DE DEPLACEMENT 18, 19 SOLIDAIRE DUDIT CHARIOT 1 ET COMPRENANT, D'UNE PART, UN ORGANE DE ROULEMENT LIBREMENT SUIVEUR 26 REPOSANT SUR UNE SURFACE DE ROULEMENT ET SUSCEPTIBLE DE ROULER SANS GLI...

Improved gasoline compositions containing a minor amount of a polyalphaolefin having a viscosity at 100 DEG C from 2 to 20 centistokes, and optionally also an aliphatic polyamine, an alkali or alkaline earth metal salt of a succinic acid derivative, and/or a polyolefin; together with a concentrate for the production of such gasoline composition and a method of operating a spark-ignition engine usi...

Improved gasoline compositions containing a minor amount of a polyalphaolefin having a viscosity at 100 DEG C from 2 to 20 centistokes, and optionally also an aliphatic polyamine, an alkali or alkaline earth metal salt of a succinic acid derivative, and/or a polyolefin; together with a concentrate for the production of such gasoline composition and a method of operating a spark-ignition engine usi...