PURPOSE:To control DC motors without greatly exceeding the withstanding capacity for the overloads by providing a differential current detector in the armature circuits of the DC motors which are operated in parallel, and decreasing the armature limiting values in proportion to the output of said detector. CONSTITUTION:The DC motors 10 and 11 which are operated in parallel are connected in paralle...

PURPOSE:To improve operability of an engine under the transient condition of the engine, by a method wherein the output of an engine and/or the speed ratio of a continuously variable transmission is regulated so that a desired driving force determined based on a demand output and a running speed is brought into coincidence with an actual driving force. CONSTITUTION:In a block 64, from a previously...

PURPOSE:To prevent the occurrence of transmission shock, by a method wherein, when a clutch is released during running of a vehicle, shift-up is effected to reduce the number of revolutions of a main pulley to about the number of idle revolutions of an engine. CONSTITUTION:By releasing a clutch during shift-down along a transmission line, the number of revolutions of main pulley is set to the numb...

PURPOSE:To detect a runaway state by producing an interruption signal to be given to a central processor through hardware and therefore setting the operating mode at an interruption processing routine despite a runaway state of the system. CONSTITUTION:When an interruption signal is applied to a central arithmetic processor, a central arithmetic processing part 2 interrupts its normal processing i...

PURPOSE:To set the generation quantity of heat to a proper value,by fusing transfer dry ink to paper sludge, of which the moisture was reduced, to unite the same with said paper sludge and squeezing out the united one from small holes to form the same into a pellet shape. CONSTITUTION:Transfer dry ink 1 and paper sludge 2 are mutually mixed and the paper sludge 2 is crushed by the blade part 6a of...

An electronic control system for a motor vehicle friction clutch and which has an electrical reference signal generator, an engine speed sensor and signal means, and a throttle position sensor which produces a signal indicative of throttle opening. The throttle signal is combined with the engine speed signal to form a modified engine speed signal and a comparator receives the modified engine speed...

PURPOSE:To efficiently remove a harmful component, by treating a high concn. waste solution in the order of decomposition-oxidation-flocculation without diluting the same. CONSTITUTION:In the treatment of a waste solution containing a hypophosphite ion, at first, a transition metal belonging to the Group VIII or a compound thereof is used as a catalyst to perform the decomposition treatment of sai...