PURPOSE:To prevent belt skipping from occurring by always keeping distance between a pulley on a driving side i.e., motor side and the one on a driven side i.e., rotary brush side constant. CONSTITUTION:The rotary brush 3 is driven by a motor 2 via a timing belt 9, and the pulley 7 around which the timing belt 9 is stretched in the rotary brush 3 is provided at a part other than both-end parts whe...

PURPOSE:To easily produce a mold while preventing the melting of a knife blade. CONSTITUTION:Protruding parts 20, 22 for forming thick grooves such as grooves or slots are provided to a matrix made of aluminum and protruding parts 24 for forming fine grooves such as sipes are provided by vertically providing knife blades made of titanium to form a tread molding surface 18. An Alumite film is forme...

PURPOSE:To facilitate assembling of a transmission of a hydraulic clutch type to be installed in a rear half part of a front part housing of a tractor. CONSTITUTION:A shaft bearing frame 4 supported in a housing is fixed and installed in a rear end part of a front part housing 1 having a middle partition wall 1a. An auxiliary transmission 12 of a hydraulic clutch type to perform speed changing tra...

PURPOSE:To reduce a gear diameter, shorten a length of a gear cylinder, simplify a shaft bearing, and form a transmission case compact in a counter gear for a transmission. CONSTITUTION:Bearing engagement parts 4, 5 and step parts 6, 7 are formed in both end parts of a gear cylinder 3. Outer ring parts 10, 11 of taper bearings 8, 9 are engaged inside the gear cylinder 3. A collar 14 is provided be...

PURPOSE:To prevent control hunting securely based on proper determination of a split mu road in a right/left wheel and front/rear wheel driving force distribution comprephensive control device to be applied to a vehicle in which a right/- left wheel driving force distribution control system and a front/rear wheel driving force distribution control system are mounted. CONSTITUTION:A device is provi...

PURPOSE:To cope with change of characteristics of a subject to control automati cally and speedily by determining a deceleration coefficient of a vehicle based on a car speed etc. correcting a desired brake pressure determined by an inverse number of it and a desired deceleration in accordance with difference from a real deceleration, and controlling a brake pressure adjusting means. CONSTITUTION:...

PURPOSE:To realize stable turning in a neutral steering range at the time of acceleration rotation in a right/left wheel and front/rear wheel driving force distribution comprehensive control device to be applied to a vehicle in which a right/left wheel driving force distribution control system and a front/rear wheel driving force distribution control system are mounted. CONSTITUTION:During turning...

PURPOSE:To preliminarily prevent shock caused by change of a partial cylinder operation condition. CONSTITUTION:For a control device for an engine 2 of a vehicle and an automatic transmission 3, to the engine 2 in which execution and recess of combustion is controlled for each cylinder group 1 preliminarily separated, and in which output characteristics are controlled to be constant before and aft...

PURPOSE:To prevent decrease of an engine rotation number to be less than a specified rotation number by shifting up at the time of the shifting up with engine traction control. CONSTITUTION:In a shift-up command process to shift up a transmission with engine traction control, a first time flag Fi is set from 0 to 1, the traction control is started, and on a low friction passage, when an automatic ...

PURPOSE:To improve heat resistance and durability of a chemically adsorbed film and improve water repellency, oil repellency and staining resistance by making a siloxane compound chemically adsorbed on a silica-alumina compound thin film formed on the glass surface. CONSTITUTION:A mixture of the formula Si(OR)4 (R is an alkyl) with the formula Al(OR)3 is applied onto the glass surface using a solg...

A dynamo-electric machine includes a stator having a ferromagnetic yoke with an internal recess and a rotor disposed in the internal recess defining a gap between the yoke and the rotor. An instrument holder to be introduced into the gap for inspecting the dynamo-electric machine includes a frame section and instruments secured to the frame section for inspecting the dynamo-electric machine. At le...

A sunshade includes a solid shaft, a support rib set, a stretching rib set. The two rib sets are respectively associated with a runner fitted movably around the solid shaft to stretch open or fold close the two rib sets radially disposed. Each support rib of the support rib set being pivotally and crossingly connected with each related stretching rib of the stretching rib set at an end portion of ...

A beach towel constructed with a polygonal center panel from which extend separate trapezoidal panels creates a towel with a substantially polygonal perimeter. The panels are sewn together to provide a strong reinforced structure, and a drawstring around the perimeter permits conversion of the towel into a bag-like structure.

Processes and apparatuses for separating ions from an aqueous solution are provided which utilize a first separation by an ion exchange medium in combination with second separation by a D.C. electropotential gradient. The first separation separates the target ion by ion exchange and the second separation effects migration of the ions from the ion exchange medium, through a ion permeable, hydrophob...

A method is provided for manufacturing interlocking parts, in which at least one part is manufactured by powder injection molding. To compensate for the amount of contraction of one of the parts manufactured by powder injection molding and, if desired, to produce an additional clearance, a separation layer of plastic material is applied between the interlocking parts. After the injection process t...

Disclosed are branched polyester compositions having an I.V. of at least about 0.7 dl/g and a melt viscosity sufficiently high to permit foaming during extrusion or molding operations. These branched polyesters are readily foamable with a wide range of foaming agents to provide low density shaped articles, films, and sheets. The branched polyesters comprise about 80 to about 99.9 wt % of a polyest...

An alarm system which incorporates a large number of ambient condition sensors makes a determination as to the existence of a predetermined alarm condition by detecting respective ambient conditions from each member of a group of sensors. The indicators from the plurality of sensors are each raised to a respective predetermined exponent and summed together. The resultant sum is compared to a prede...

When the vehicle has deviated or is deviating from a lane on which the vehicle has been or is running, the deviation of the vehicle from the lane can be suppressed, for example, by allowing the steering wheel to be operatively rotated prior to an intention of the operator. The timing of suppressing the deviation of the vehicle can be altered in accordance with conditions including, for example, th...

A shrinkable polyester film for applying to bottles and other articles comprises not less than 50 mol% of ethylene terephthalate units and has a birefringence of from 0.040 to 0.150, a shrinkage of not less than 40% in one of the machine direction and the transverse direction and a shrinkage of not more than 20% in the other of the said directions after 5 min treatment in an air oven at 100 DEG C,...

PURPOSE:To support a medical job in a hospital and to reduce the labor of a staff, especially, a nurse by displaying information with respect to inspection, a taken meal, administered medicine or a message on a television receiver. CONSTITUTION:A computer 1 is arranged in the administration room of the hospital, and the television receiver 12-1, a controller 11-1 which fetches data from inspection...