PURPOSE:To always retain control liquid pressure at a target value by correcting the drive duty ratio of a solenoid valve according to the temperature of a control working liquid, which is detected by a fluid temperature sensor. CONSTITUTION:A signal from a throttle opening sensor 205 and a signal from a voltage sensor 207 of a duty solenoid are input to a micro-computer 200. The temperature T of ...

PURPOSE:To enable the operating performance of a vehicle to be improved by a large margin by providing, on a release pressure supply line, a variable throttle mechanism, whose opening area is varied in response to the running speed of the vehicle, and then providing an accumulator on the downstream side from said variable throttle mechanism. CONSTITUTION:Orifices 17, 18 are provided on both a line...

PURPOSE:To increase purity, stability, and performance by containing an electrolyte in gel produced by hydrolysis and condensationpolymerization of alkoxide. CONSTITUTION:A mixture of Si(OR)4 (R=C2O5) and H2SO4 is poured into a container 9 to a specified level. and shaked to form gel, then a gelled electrolyte is obtained. The electrolyte has crosslinked structure which is not broken by vibration ...

PURPOSE:To simplify the manufacture of a plate group for a lead storage battery by packing a paste into one surface of a retainer consisting of a nonwoven glass-fiber fabric before wrapping a grid-like base body made of a lead alloy in the retainer, followed by stacking thus formed plates to make a plate group. CONSTITUTION:A paste 2 composed of lead power and dilute sulfuric acid is packed into o...

PURPOSE:To simplify the assembling process by placing a battery case at a lower specified place of an assembling section and pushing an electrode cluster out of a steel box located at the upper part of the assembling section and inserting them into the battery case. CONSTITUTION:An assembling section 5 comprises a steel box section 2 for holding and tightening an electrode cluster 1 to a specified...

PURPOSE:To provide the press equipment to which a piezoelectric actuator is applied, which can feed in and take out a working material and whose handleability is satisfactory by securing a necessary and sufficient interval between the upper die and the lower die in an open state of a press die irrespective of an operating stroke of the piezoelectric actuator. CONSTITUTION:The equipment is constitu...

PURPOSE:To reduce an influence exercised by the rotation reaction force of a tire on the coupling part of a power unit capable of reducing whole weight through rigid coupling, with an adapter, a differential gear device, and a transmission. CONSTITUTION:A power unit comprises an engine 12 arranged approximately at the central part of a vehicle, a transmission 14 brought into rigid coupling with th...

PURPOSE:To avoid generation of a braking phenomenon and to surely improve turning performance of a vehicle in a right and left driving force control device for a car suitable for a car in which right and left wheels can be independently driven. CONSTITUTION:A driving force transmission system T for transmitting a driving force of an engine 8 of a car to each of wheels is provided with a right driv...

PURPOSE:To reduce the axial direction dimension of a planetary gear type differential gear control device, to eliminate a chamfer face of a spline and to improve workability by joining the spline on the inner circumferential side of a sleeve and a spline on the outer circumferential side with an input shaft and a spline provided on the inner circumferential side of a ring gear all the time. CONSTI...

PURPOSE:To reduce a movement amount of a lock amount of a lock device for preventing removal of a position pin constituting an operating device for an automatic transmission from a specific range against a movement amount of a foot brake pedal. CONSTITUTION:When a foot brake pedal 9 is stepped down, a lock plate 13 is rotated for preventing movement of a position pin 5 by a cable 11 along a guide ...

PURPOSE:To enable action of a multiple disk clutch without providing a rotation sliding part using an X ring at a passage for supplying pneumatic pressure by providing a thrust bearing between a flange mounted coaxially on an axle shaft in capable of movement in the direction parallel with the shaft and a piston. CONSTITUTION:A multiple disk clutch 6, a cylinder 14 to which a pneumatic pressure fo...

PURPOSE:To obtain desired driving characteristics by providing a control means which corrects and updates a control gain of a driving characteristic control means by learning control according to a driving position of a car and changes a correction amount of the control gain according to the number of updating of the control gain so as to prevent hunting. CONSTITUTION:There are provided a detectin...

PURPOSE:To give a driver more satisfaction in normal driving condition by providing a control means for changing and controlling a control gain of a driving characteristics control means based on a position detection signal from a position detecting means according to a learning program obtained at least by learning operation of the driver. CONSTITUTION:There are provided a detecting means for det...

PURPOSE:To obtain traveling operating characteristics matching driver's inten tion and choice in any region by permitting a driver to learn operations of a control gain changing means based on an automobile position detected signal, thereby changing control gains of a traveling characteristics control means. CONSTITUTION:A position detecting sensor 18 for receiving signals, etc. from a space satel...

PURPOSE:To cope with a habit of a driver to obtain traveling characteristics matching the intention of the driver by controlling the amount of correction of control gains so that it becomes smaller when no changes in the operating state of the driver are observed despite the number of renewal of learning controls is increased. CONSTITUTION:Besides a position detecting sensor 18 for receiving signa...

PURPOSE:To increase an engine brake effect in manual mode and also improve fuel consumption. CONSTITUTION:When a specified shift position is selected in manual mode by a shift device 1, it is judged by a mode judgment means 3. In accordance with the judgment result, a rotational speed at which fuel is cut by a cut rotational speed set means 4 is set up. The cut rotational speed is lower than the c...

XG17 IMPROVED BANDAGE A layer of plastic, either in film or coating form, is bonded to a sheet of non-woven material to form a base. When film is used, it is preferably smaller in size than the non-woven material and affixed to the top surface thereof by an acrylic adhesive. The plastic film is coated, on its exposed surface, with a layer of acrylic adhesive. When the plastic is in the form of a c...

L'invention concerne un procédé pour la préparation de masse active positive ou de masse active négative d'accumulateurs au plomb en utilisant la masse active séparée de plaques de rebut et/ou les déchets de masse active formés pendant la fabrication. Selon l'invention, on introduit la masse active positive ou la masse active négative, selon la masse active respectivement préparée, préalablement s...

A spherical glide securable to a structural leg comprising a first substantially hemispherical half and a second substantially hemispherical half secured together by cooperating interference means on the first half and the second half and further including means for securing the spherical glide to the leg. The cooperating interference means may comprise a circumferential wall extending from a fris...