PURPOSE:To enable the sponge-like expansion of a negative electrode plate, which is packed with a paste, to be prevented by the plate itself by applying a fluidized synthetic resin to the peripheral grid part of the plate before carrying out drying of the plate, and simultaneously carrying out drying of the paste and hardening of the resin. CONSTITUTION:Before drying the second-stage plate or the ...

A safety ski binding comprises a sole grip pivoted on an end of a sole-supporting plate elastically connected to the ski by a flexible cable tensioned by a spring winder incorporated in the plate. A device for automatically opening the sole grip, after removal of the sole grip from the ski by withdrawal of the cable but before the cable is fully withdrawn, comprises a projection on the winder whic...

PURPOSE:To allocate processors at high speed, by allocating a processor having the processor number, which is held in a processor number register, to a task whose execution is requested from another processor. CONSTITUTION:Task levels indicating priority levels of tasks, which are executed in respective processors, and the lowest task level of these levels are held in registers 11-1n and 20 of a m...

PURPOSE:To improve the error detection rate, by dividing data to blocks consisting of continuous bit regions so that partial continuous bit regions overlap. CONSTITUTION:In the parity check system where data consisting of plural bits is divided to plural blocks and a parity is added to every block, data is divided to plural blocks consisting of continuous bits regions (a)-(d) so that partial conti...

PURPOSE:To allow a measuring device for measuring the optical axes of a vehicle, etc., to diagnose itself by storing picture information in plural frame memories and comparing the picture information with a reference picture. CONSTITUTION:In frame memories 10 and 12, beam pictures of a right and a left headlight are stored and in a frame memory 14, the installation position of a vehicle to be insp...

1416930 I C engine driving gear MASCHINENFABRIK AUGSBURG-NURNBURG AG 19 Dec 1973 [20 Dec 1972] 58977/73 Heading F1B [ Also in Division F2] In gearing for driving a cam-shaft 2 from a crankshaft 1 in an I.C. engine an intermediate gearwheel 4 between gear 3 on the crankshaft 1 and a gear 5 on the cam-shaft 2 is rotatably mounted on a stationary shaft 8 which can be moved radially and axially to cau...

PURPOSE:To execute simultaneously both terminal processing of an optical fiber, and fitting of a feed terminal to a protecting conductor for feed, by providing a recessed part for a fiber and a fiber protecting conductor, on two divided blocks. CONSTITUTION:Fibers F1-F3 are provided in a protecting conductor 1. A fixed block is divided into both upper and lower blocks B1, B2, and on the lower bloc...

PURPOSE:To grasp a loss in a splice part, by sending a value obtained by amplifying a monitor optical input by a repeater, to the transmission side by a return- transmission line, in a method for checking whether a splice of an optical fiber in an optical fiber submarine repeater is correct or not. CONSTITUTION:Terminal stations 10, 11 are connected by a submarine cable, and are provided with rep...

PURPOSE:To prevent a connection loss of an optical transfer quantity in case of junctioning an optical fiber, by finishing a cut end face of an optical fiber made of plastic, to a specular surface having no burr. CONSTITUTION:A fiber 1 is fitted into a lead-in hole 9, is led into a cylindrical guide 5, also is inserted through a burr cut ring 3, and as for its tip part, a finish allowance delta of...

PURPOSE:To make particle structure dense and heavy by executing granulating procedures of spraying of a binder predrying mechanical agitating of fluidized layer drying repeatedly at least twice. CONSTITUTION:Granulating procedures including spraying process of a binder, predrying process, mechanical agitating process of fluidized layer and drying process are executed repeatedly plural times, w...