A fire alarm system which makes fire determination based on a novel idea which considers various changes of the physical phenomena in the surroundings caused in relation with the occurrence of a fire in terms of changes of vectors. These changes in the physical phenomena are detected by the detecting section in the form of analog data and processed by a data sampling section as sampled data and st...

PURPOSE:To simply and stably rotate a centrifuge by constituting the taper angle of a taper shaft of two stages of the angle same as that of the taper hole of a rotor and an angle different from that of said taper hole. CONSTITUTION:A rotor 1 in which a sample 2 to be separated is inserted is rotated at a fast speed by a drive device 6. The drive torque at this time is transmitted by the friction ...

PURPOSE:To eliminate the problem of the distance between cars being considered as one cause to generate a traffic jamming by operating an electronic coupling running system to take an adequate distance between cars when the traffic density is high. CONSTITUTION:When the traffic density exceeds a standard value designated for the road condition, the traffic density is measured by the counter 11 of ...

PURPOSE:To manage the data efficiently by providing a centralized memory device to store the data from plural control units. CONSTITUTION:A centralized memory device 10 furnishes a memory main body 12 and a data transfer device 14. And a trouble self-diagnosis data, a learning data, and the like from an engine control unit 18 and an automatic transmission control unit 20 are stored in the memory m...

PURPOSE:To butt both preceding and succeeding film sheets in an accurate manner by installing each indicating mark for both working termination and starting ends in a pressing body of the sheet film solidly for butting use or separately for superposition use, and setting up a preceding film sheet presser and a succeeding film sheet presser in the pressing body, respectively. CONSTITUTION:A working...

PURPOSE:To perform stable operation with high efficiency by setting a water supply temperature at an outlet of a high pressure stuck gas cooler to be not more than a steaming generating range in case that the water supply temperature at an inlet of a boiler is within a steaming generating range, and thereby preventing generation of steaming under any operation condition. CONSTITUTION:Under a high-...

PURPOSE:To improve fuel consumption and prevent engine stopping at the time of rapid braking by constituting an electronic control device so as to converge output torque to a target value in response to operation condition of an internal combustion engine, and enabling a rock up release zone to be set to a low vehicle speed side or a low rotational speed side so as to enlarge a rock up control ran...

PURPOSE:To realize automatic clutch operation controlled in shock by detecting the shift operation end state of an artificial operation tool, and after sending out a signal for intermittently engaging and disengaging an electromagnetic clutch on the above detection for fixed time, continuously sending out an engaging operation signal. CONSTITUTION:The shift fork driving shaft 19 of an input case s...

PURPOSE:To improve transmission control characteristic and reduce transmission shocks by calculating during transmission the amount of output torque reduction from the output signal from a torque detection means and issuing a command for controlling the oil pressure suited for an inertia phase when the amount of the torque reduction exceeds a preset value. CONSTITUTION:A means 101 detects the outp...

Fibrous polyolefin nonwoven sheets are bonded and stretched in a continuous, multiple stage process. First, the sheet is heated without significant stretching to a temperature that is close to, but below, the melting temperature of the polyolefin. Then, as the sheet is forwarded to a first stretching stage, the sheet temperature is decreased by 5 DEG to 40 DEG C. and thereafter the sheet is alte...

A system for storing electrical energy in the form of triple-point CO2 and then using such stored energy plus heat to generate electrical power. A reservoir (11) of carbon dioxide liquid at about the triple point is created in an insulated vessel. Liquid carbon dioxide is withdrawn and pumped to a high pressure (47,15), which high pressure carbon dioxide is heated (19,21) and expanded (23) to crea...

A control method controls a belt-and-pulley continuously variable transmission having driver (H) and driven (K) pulleys mounted respectively on input and output shafts, a V-belt (I) engaged around the driver (H) and driven (K) pulleys, and an oil pressure source and an oil drain unit operatively coupled to first and second hydraulic pressure chambers (21A,53A) for axially moving the movable conica...

A solenoid operated valve apparatus in which a solenoid device (2) includes an inner yoke (10), a plunger guide (11) disposed in the opposed relationship with the inner yoke (10), a plunger (13) movably accommodated in s space (12) formed between the inner yoke (10) and the plunger guide (11), a bobbin frame (16) disposed to surround the inner yoke (10) and said plunger guide (11), a coil (17) wou...

In order to wind a newly joined thread onto a tube newly inserted on a spooling device on an open-end spinning mechanism, the newly joined thread, together with a thread portion containing a leader, is guided away before the start of the bobbin build-up. Thereupon, the thread portion containing the leader is severed from the thread, and subsequently, the thread supplied by the open-end spinning me...

PURPOSE:To apply a.c. pulses to EL light emission elements and drive the EL light emission elements with high intensity by controlling first through sixth control switches so as to charge an accumulation condenser and supplying electric charges of positive and negative electrodes of the accumulation condenser alternately to the EL light emission elements. CONSTITUTION:An accumulation condenser CQS...

This bracket with jaws (1) has a housing (2), extending in its longitudinal direction and accommodating a release spring (13), and a sole holder (7) which is arranged on a bolt (6) extending essentially perpendicular to the upper side of the ski. The bolt (6) is mounted with its lower end in a bearing body (3). In order to make automatic setting of the sole holder (7) possible even when the t...

This front piece has two bent levers, which grip laterally around the boot sole and are swivellable counter to the force of a release spring, and a sole holder which is adjustable by means of a bolt in a direction extending perpendicular to the surface of the ski and is fixed in the travelling position by its lower end in an elongate hole which is fixed to the ski. In order to improve the rel...

Method for performing the automatic contactless inspection of objects manufactured at a high speed by an automatically controlled machine, in particular high-temperature glass objects, the objects moving in front of an optical measuring device, consisting in illuminating the moving objects with a non-coherent white light, sensing the transmitted light by means of an optical sensor (5) provided wit...

A cDNA sequence encoding the alpha -subunit of human mast cell IgE surface receptor or an IgE binding fragment thereof.

PCT No. PCT/GB91/02020 Sec. 371 Date Aug. 20, 1993 Sec. 102(e) Date Aug. 20, 1993 PCT Filed Nov. 15, 1991 PCT Pub. No. WO92/08875 PCT Pub. Date May 29, 1992.A well completion system comprises production tubing (5) extending downhole from wellhead equipment (2) to a plurality of completion systems (7, 8, 9). A well testing facility comprising a test loop (26) with flow metering equipement (27) is i...