In the process, the untreated gas flowing out of the pressurised combustion chamber is, if the temperature is above the ash fusion temperature, first of all cooled to below the ash fusion point but above the gas-turbine inlet temperature by means of recirculated exhaust gas and/or air and/or oxygen, is then cooled further with heat being released to the clean gas and by the addition of recirculate...

PURPOSE:To provide a grinding tool markedly enhanced in abrasion resistance and excellent in durability and economics by forming a grinding edge from a diamond sintered material. CONSTITUTION:A grinding tool contains a main body frame 1 and a required number of chip saw like blades 10, which have a large number of grinding edges provided to the peripheral edge parts thereof, incorporated in the ma...

A device for stacking selected sheets in an offset manner so as to facilitate print quality measurements. Certain sheets are automatically or manually selected to be offset deposited onto a stack of sheets so that an edge of the selected sheet including a number of printed measuring fields extends beyond other sheets in the stack. A measuring head transversely scans the measuring fields of the sel...

PURPOSE:To release output torque at optimum timing when sharing torque comes to zero as well as to abate a shift shock by detecting the actual output torque of both input and output shafts, and setting the release timing of a release factor from the variation. CONSTITUTION:Input shaft torque Tt is calculated at a computing element 33 with rotational frequency of an engine 1 being detected by a spe...

PURPOSE:To perform a clutch changeover smoothly under a proper torque sharing ratio as well as to aim at reduction in a shift shock by setting clutch changeover timing on the basis of a variation in actual output shaft torque. CONSTITUTION:Input shaft torque TA and output shaft torque TB of a compound clutch type multistage transmission 2 are detected each by both first and second torque sensors 4...

PURPOSE:To improve acceleration at the time of speed change by providing a valve for discharging a pressure oil in the defined oil chamber in a modulation valve to a drain, lowering a lock-up oil pressure to a defined pressure at the time of speed change and, after maintaining this oil pressure for a defined time, gradually increasing the oil pressure. CONSTITUTION:At the time of speed change a lo...

PURPOSE:To improve health of a man and durability of a housing, by a method wherein an earth floor heater is mounted to a housing, a heat exchanger to exchange heat between internal and external air is disposed in an attic space, and an irradiating mechanism to introduce solar light and heat to a room is provided. CONSTITUTION:An air cycle passage 22 is formed by an attic space 12, a vent passage ...