PROBLEM TO BE SOLVED: To provide a magnetic pole tip of an inexpensive electrostatic magnet which enables production thereof from an spiral ferromagnetic material and moreover, removal of a possible eddy current. SOLUTION: A spiral coil 25 made of a ferromagnetic material is used with the diameter larger than the diameter D of a desired magnetic pole end part and magnetic pole ends 32A and 32B of ...

PURPOSE: To enhance reliability and to reduce a cost by setting a brazing filler metal of an alloy consisting essentially of a prescribed metal at the brazing sections between steel members or the sections near the same, subjecting these members to a carburization treatment, then to brazing followed by hardening. CONSTITUTION: The brazing filler metal 30 of the alloy essentially consisting of Cu a...

PROBLEM TO BE SOLVED: To prevent the generation of molding burr while enabling venting so as to enhance the appearance of a molded article by providing a hole allowing a cavity to communicate with the outside of a mold and the plug which is flush with a molding surface and closes the hole so as to accurately occupy the whole surface thereof. SOLUTION: The inner surface 20 of a shell 2 molding one ...

PROBLEM TO BE SOLVED: To conform one print manufacture to another print manufacture as much phantasmagoric possible by automatically and continuously tuning adjusting a width of a roll changer, positions of various factors of a printing cylinder and a folding unit. SOLUTION: Another printing material web 1 from another roll changer 13 is passed through a second tower 40, but this tower is constitu...

PURPOSE: To increase judgement precision for a traveling environment based on a neural network computing by representing a feature quantity in terms of a parameter of a Poisson distribution of an accelerator operating quantity in the case of accelerator operation and representing a feature quantity in terms of a parameter of an exponential distribution of a vehicle speed increase range in the case...

PURPOSE: To provide a sporty transmission feeling intended by a driven by lowering a gear shift shock reduction quantity during selection of a manual transmission mode in comparison with that during selection of an automatic transmission mode. CONSTITUTION: On the basis of an output from a vehicle speed sensor S5 detecting a value complying with a vehicle speed, an output from a throttle opening s...

PURPOSE: To increase certainty for stopping a machine body at the time of operating a parking brake, by providing a regulation mechanism for evacuatively moving from a regulation position for regulating the transmission performance of the transmission mechanisms of respective side gears, interlocking with the brake releasing performance of the parking brake. CONSTITUTION: A drum brake type parking...

PROBLEM TO BE SOLVED: To stack a sheet on a first chain sheet pile with a side having a chain sheet printed placed up by transferring a chain sheet from a chain gripper mechanism in the upper traveling zone of a paper ejection device chain to a gripper mechanism in the rear side of the first chain sheet pile, and changing a direction. SOLUTION: To stack a chain sheet on a first right chain sheet p...

Adhesive tape having a stitch bonded fabric (mali fabric) support coated on one or both sides with an adhesive.

A catheter for radio frequent ablation of tissue which includes a flexible elongate member having proximal and distal extremities. The flexible elongate member is provided with a lumen in the distal extremity. A metal conducting electrode is secured to the distal extremity of the elongate member and has first and second extremities. The electrode is provided with a chamber therein which is in comm...

A polyester film having excellent heat resistance and insulation property is produced by the inventive process which comprises: melt-extruding a polyester resin into a sheet, extending the sheet to shape it into a film and treating the film thermally to heat-set, wherein the polyester resin has an intrinsic viscosity of 0.7 to 0.75 dl/g and other portions which satisfy formula (1) and the thermal ...

A novel group of mutant yeasts and novel methods for selecting and using the mutant microorganisms are set out. A novel process for using the mutant yeasts to produce fermentation products with a lower than usual glycerol content is also disclosed. Novel beverages, including beers, wines, ales, and sake, and novel low glycerol baked goods are also possible using the novel mutants of the invention....

A polyester film coated with a novel primer coating and overcoated with one or more gelatin-aziridine coatings makes an excellent photographic film. The primer coating has about 85-90% by weight of a water-dispersible copolyester and about 1-15% by weight of an anionic surfactant. The water-dispersible copolyester contains about 80-98 mol % of at least one dicarboxylic acid or its ester equivalent...

PURPOSE: To efficiently assemble a bead fitted with a filler extremely large in width or a bead fitted with a filler constituted of a plurality of compds. different in material quality by using existing equipment without using a special laminating apparatus or an extrusion apparatus. CONSTITUTION: A base filler Wa is wound around a bare bead Q by existing equipment to mold a bead assembly product ...

A process for dissolving CO2 in a liq. polymer (I), at a concn. of 0.2-9 wt.%, comprises mixing liq. CO2 at a temp. of -30 to -5 deg. C. with (I) at a temp. of 10-30 deg. C., at a pressure which is 1.2-3 times the satn. vapour pressure (absolute) of the amt. of CO2 to be dissolved in (I).

Process for recycling polyurethane plastics by cleavage with a cpd. (I) having at least two isocyanate-reactive H atoms to form regenerated material contg. isocyanate-reactive H atoms, in which the polyurethane material and the (I) are fed together with a 2- to 20-fold amt. of the regenerate to a high speed mixing and comminution pump that generates high shear forces between rotor and stator.

PURPOSE: To make it possible to excavate a ditch with specific depth from an excavation starting point to eliminate artificial correction of post work and to promote work efficiency by providing a ditch finishing plate to the rear of a rotary excavation edge, and making it possible to fold the ditch finishing plate with a turning link. CONSTITUTION: In a ditcher for excavating a ditch in a rice fi...

The stack reflectance is predicted from an on-line, wavelength dependent measurement of the sheet reflectance and the on-line measurement of the sheet opacity at a wavelength interval. The stack reflectance Rst is then used to predict and/or control stack color, preferably by using the parameter K/S = (1-Rst

An improved wheel disc and disc and and rim wheel assembly, and method and press apparatus for manufacturing the same. The wheel disc is adapted for telescopic press fit precision mounting into a mating wheel rim to form the wheel assembly. A flat disc blank is progressively die formed into a disc preform having a cross-sectional contour proximating that of the finished disc. The disc preform is t...

An exercise device for exercising all of the major muscles comprising the upper and lower abdomen and back, while avoiding undue stress on the lumbar and cervical spinal discs and the muscles comprising the lower back and hip flexors. The device provides rigid upper and lower back supports which are pivotally joined at a point which restricts flexure of the spine to the T10-L1 region. Resistance m...