PROBLEM TO BE SOLVED: To reduce the size, without stress applied on a collector tab.

SOLUTION: A cathode collector tab 3 and an anode collector tab pulled out from a laminated body 5 laminating a cathode electrode 1 and an anode electrode 2 through a separator, are bent along the laminated body 5 perpendicular to a pulling direction without tensile stress, and are connected to a cathode lea...

PROBLEM TO BE SOLVED: To provide a negative electrode material that has a high discharge capacity to offer a superior cycle characteristics and initial charge/discharge efficiency when used as a negative electrode material for a lithium ion secondary battery and a manufacturing method for the negative electrode material, and to provide the negative electrode material for a lithium ion secondary...

PROBLEM TO BE SOLVED: To provide a wavelength variable laser light source which can vary the wavelength over a wideband in a single mode without causing a mode hop.

SOLUTION: An external resonator is comprised of a semiconductor laser 11 and a diffractive grating 15, and a light deflector 14 is arranged between the semiconductor laser 11 and the diffractive grating 15. As for the light defl...

PROBLEM TO BE SOLVED: To provide a new electrode manufacturing device and an electrode manufacturing method which are capable of easily forming a thin electrode layer whose one side is, at least, smooth on a porous current collector, and causes no trouble even if a general coating device is used; and to provide an electrode and an electrochemical device.

SOLUTION: The electrode manufacturin...

PROBLEM TO BE SOLVED: To provide a miniaturized test coupon which detects a deviation between wiring layers in a multilayer substrate.

SOLUTION: In a test coupon 10, there are provided a first through-hole 1, and second through-holes 2a to 2j which one by one correspond to each of wiring layers L2 to L11 used as detection subjects of the deviation. In the wiring layer L2, there are formed: ...

PROBLEM TO BE SOLVED: To keep a positioning accuracy and to reduce an area used for a connection in connecting a wiring board and a wiring cable.

SOLUTION: An electronic equipment 1 comprises the wiring board 10 with a plurality of wiring patterns 11 provided at the end part of a board 10a and the wiring cable 20 with a plurality of terminals 21 provided at the end part of a base film 20a, ...

PROBLEM TO BE SOLVED: To provide an organic EL element, a display using the same and a luminaire wherein a good luminescent brightness and luminescent lifetime are exhibited, a dark spot in driving is small, an aging stability under a high temperature and a high humidity is high.

SOLUTION: In the organic electroluminescence device which has an electrode and at least two organic layers on a ...

PROBLEM TO BE SOLVED: To solve the problem that there are cases where it is insufficient for preventing peeling of a conductor circuit because roughening process of an inner layer circuit pattern is fine and further it is not a roughening process of a form for engaging with a via hole plating layer and a resin insulating layer, in a conventional constitution.

SOLUTION: A roughened-formed la...

PROBLEM TO BE SOLVED: To provide image data and a method for evaluating a device handling a moving video of extensive color gamut.

SOLUTION: A chrominance exceeding the range of a chrominance represented by a brightness signal and a color difference signal specified by ITU-R BT. 601 or BT. 709 is expressed. Image data consisting of a brightness signal and a color difference signal conformin...

PROBLEM TO BE SOLVED: To enable the PON counter of a terminal device to synchronize correctly in a PON system in which up signals sent from a terminal device to a central terminal are subjected to time division multiplexing.

SOLUTION: The PON system is provided with a central terminal 1, an optical fiber network 10 having a configuration in which an optical fiber 5 connected to the central ...

PROBLEM TO BE SOLVED: To avoid programmable logic being configured by configuration data, other than those intended.

SOLUTION: This programmable logic system has a configuration RAM 12 in which supplied configuration data are written, a logic module 11 which constitutes a circuit defined by the configuration data written in the configuration RAM 12, and a management circuit 13, which manage...

PROBLEM TO BE SOLVED: To provide a television receiving system capable of automatically turning on or off the EPG display depending on a viewing distance of each audience.

SOLUTION: This television receiving system has a means for measuring a distance between a television device 100 and a remote control 200 and controls EPG display in the television device 100 and remote control 200 dependi...

PROBLEM TO BE SOLVED: To obtain the direction of rotation, to restart an induction motor without detecting a rotational speed and a residual voltage in the free-running induction motor.

SOLUTION: A controller is provided with a current detector 101 for detecting an input current of the free-running induction motor 3, a coordinate converter 102, a trigger voltage generator 108 for applying a...

PROBLEM TO BE SOLVED: To provide a stator, where the jumper wire of a coil can be arranged easily, and a brushless motor.

SOLUTION: The first insulator 20 is provided with an extension 23 where the cover end face 21a of an annular cover 21 is axially extended toward the opposite side from an end frame. The extension 23 is provided with a plurality of cuts 24a and 24m which extend toward the...

PROBLEM TO BE SOLVED: To provide a method for judging the cohesiveness of a yeast, especially the cohesiveness of a bottom beer yeast, by which a clear result is simply and quickly obtained.

SOLUTION: This method for judging the cohesiveness of the yeast comprises detecting whether a partial deletion exists or not in a region specified by a base sequence encoding a specific base sequence or...

PROBLEM TO BE SOLVED: To provide a sanitary cigarette case which has a simple structure, can easily be operated, can duplicatively be utilized, and can automatically put out cigarettes, and from which the cigarettes can easily be taken out.

SOLUTION: The case has a bottom panel 1 and an upper lid 2, and one of the bottom panel 1 and the upper lid 2 is fixed with metal fittings. Therefore, t...

PROBLEM TO BE SOLVED: To provide a fundus camera having an improved alignment maneuverability with respect to the eye to be examined when performing three-dimensional photography.

SOLUTION: The fundus camera comprises a main unit having a fundus observation optical system for observing the fundus of the eye to be examined and a fundus photography optical system for photographing the fundus ...

PROBLEM TO BE SOLVED: To efficiently reinforce the strength of the internal frame by enabling the internal frame to be integrally molded of a synthetic resin as the material.

SOLUTION: In this internal frame of a pachinko game machine, hinge member attaching sections 14 and 15 are formed on the top and the bottom of the left side part of the internal frame body 1 made of the synthetic resin...

PROBLEM TO BE SOLVED: To attain both of functionality as an acoustic seat and comfortableness as a seat by clearly distinguishing the transmission path of a low-pitched sound range from that of a high-pitched sound range to a seated person.

SOLUTION: An oscillation conducting structure 18 which has a single speaker 14 for low-pitched sound and a net cushion body 16 being a three-dimensional...

PROBLEM TO BE SOLVED: To provide a new game machine which can sufficiently demonstrate the hope for a "jackpot" by winning of a "small jackpot".

SOLUTION: In this game machine having the "jackpot" through the "small jackpot", an external input by an arbitrary operation by a game player is accepted without a specified period of time during a variable display or right after the variable displ...