PURPOSE:To reduce defective and improve working efficiency by controlling a carrying-in guide device and carrying-out guide device to be moved in agree ment with the center line of the joint of a bandlike rubber seat material, by means of output from an arithmetic/control unit. CONSTITUTION:A pair of detectors 9a and 9b detect a dislocation delta and its dislocated direction to the center line X-X...

PURPOSE:To enhance running stability of a vehicle by generating a differential limiting torque by connecting a disk and a plate to each other, and also a large differential limiting torque by a viscous coupling, thereby compensating respective drawbacks mutually with two differential limiting devices of different characteristics. CONSTITUTION:When a vehicle with its right and left driving wheels p...

PURPOSE:To prevent spinning accompanying the operation of a parking brake by switching a driving system from two-wheel-drive to four-wheel-drive if a parking brake is put on when a vehicle is in two-wheel-drive condition due to operation of an anti-lock control. CONSTITUTION:In an anti-lock controller, a modulator 12 is controlled by an ECU 9, based on signals detected by wheel speed sensors 10L, ...

PURPOSE:To enable small radius turning by providing a reduction gear on a drive force transmitting system to rear wheels of a vehicle for chemicals sprinkling speed sprayer and the like, and lowering speed of rear wheels at steering front wheels over a prescribed angle so as to turn the vehicle by driving force of front wheels as if it turns centering around the rear wheel. CONSTITUTION:In a speed...

PURPOSE:To make automatic bag making of a bag with pouring port possible easily by a method wherein pouring ports are attached on a tape first, and both ends of a main body tape is joined to form it into a cylindrical shape using this tape with pouring ports, and cross sealing and cutting are performed. CONSTITUTION:A main body tape 2 is let out from a roll 1, and both ends are pulled closer by a ...

PURPOSE:To make it possible to shape a packaged body well by small pressing force by a method wherein press-shaping is performed under a condition in which the sealed upper and lower ends of a packaged body is pinched, and also both the ends are pinched into a linear state which is the final shape of both ends after shaping. CONSTITUTION:A cylindrical shaped packaged body (a2) which it sent downwa...

An insertion device 9 is used to introduce material in sheet or leaf form, in particular paper, plastics or foil segments, between the slices (e.g. of food) cut by a cutting machine 7. A web (not shown) is unwound from a roll 11 and is carried into the cutting range of the circular knife 4 of the cutting machine through an intermittently driven feed device. The insertion device of the cutting mach...

Expandable rubber for curing tires, and the curing of tires therewith, composed of a specified rubber composition involving butyl rubber with low unsaturation combined with the utilization of stearic acid without castor oil.

A predetermined control on an engine, i.e., a fuel-cut operation, is executed after an accelerator has been released under predetermined conditions when vehicle speed is higher than a fuel-cut vehicle speed value and engine speed is higher than or equal to a fuel-cut engine speed value. In an automatic transmission drivingly connected to the engine via a torque converter, a gear shift is initiated...

A bead locking apparatus comprising bead support segments (6) disposed in an annular arrangements at each of the axially opposite ends of building drum (1) mounted on a rotary shaft (4) the support segments (6) being movable outwards or inwards radially of the drum (1), an elastic ring (8) fitted in an annular recess (20) formed in the outer periphery of the annular arrangement of segments (6), a ...

A microprocessor controlled signmaking machine (1) including a reciprocating plunger (210) that impacts adhesive sheet material (46, 46a-d) to form a sign (48) including one or more characters separable from the sheet material (46, 46a-d) that can be adhered to the surface of an object.