PURPOSE: To enable an X-ray detector to be pushed out from an object by collision force relating to almost all collisions to another object regardless of an approaching direction of the object to make the force loaded on the object extremely small to minimize the risk of damage. CONSTITUTION: A frame and a support 7 connected to the frame to support an X-ray source 9 on one end and an X-ray detect...

PURPOSE: To increase the use capability of the subject device and to make it possible to automatically detect and regulate a boundary surface by arranging a light source, photodetecting members and optical members in such a manner as to receive the reflected light corresponding to brightness and constituting the subject device in such a manner that a control signal is induced in accordance with th...

PURPOSE: To produce the edge smoothly sealing the open edge of a fluted plastic board without adding an additional enveloper or an adhesive by simultaneously sealing the space between a form unit and an end wall and pressing the molten end wall to the unit so as to form a continuous end wall between face boards. CONSTITUTION: An edge sealing unit 13 includes a longitudinal form unit 14 positioned ...

PURPOSE:To provide a technology improving the shape of the metal fitting clamping flange part of a tire vulcanizing bladder and shortening the vulcanizing time of the tire vulcanizing bladder. CONSTITUTION:In a freely expansible tire vulcanizing bladder 21 having a pair of opening parts formed into a hollow cylindrical shape from an elastic material such as rubber provided to both ends thereof in ...

PURPOSE:To perform the replacement of a tire constituting material in a short time and obviate the transfer work of a stock roll by providing a let-off device providing a notch part for mounting two cassettes toward the center of revolution and a feed-in device independently revolvable around the center of revolution. CONSTITUTION:A let-off device 1 unwinding a tire constituting material, a cutter...

PURPOSE: To easily correct the failure of tire uniformity while enabling a decrease in radial force variation by removing the rubber material of the axial outer wall of the bead of a tire mounted on a rim. CONSTITUTION: A rim-mounted, inflated tire is mounted in a uniformity tester and rotated to record variation of the radial force of a wheel assembly on a graph. The variation of the radial force...

PURPOSE:To provide a driving force connecting/disconnecting device which automatically connects a side gear shaft and an axle shaft in the four-wheel drive and automatically cuts off the connection in the two-wheel drive. CONSTITUTION:A driving member 11 which is supported in a rotatable manner on a supporting member 12 fixed on a differential carrier, driven member 13 which is supported in a rota...

PURPOSE:To simplify the.engine control of the pump motor control during the hybrid traveling, as to a regenerative brake device for a vehicle. CONSTITUTION:As for a vehicle regenerative brake device which recovers the deceleration energy of a vehicle and utilizes the energy as the energy for stert and acceleration, the pump motor control and the engine control are carried out according to the vari...

PURPOSE:To prevent the erroneous judgment by taking account of the delay of the behavior of a vehicle for steering, when the steering characteristic is judged on the basis of the yaw rate or the actual value and the standard value of the lateral acceleration. CONSTITUTION:The standard lateral acceleration upper limit value Ygu and the standard lateral acceleration lower limit value Ygw are set acc...

PURPOSE:To properly control an engine output drop at all times for the alleviation of a one-way clutch engagement shock during a down-shift gear change on timing just suitable for actual gear change operation. CONSTITUTION:An automatic transmission 2 is controlled with a controller 9 for a gear change via solenoids 6 and 7, and an engine 1 is controlled with a controller 12. This controller 12 cau...

PURPOSE:To restrain the deterioration of emission without causing a drop in travel performance by implementing the down-shift gear change of a transmission, when a driving force is enhanced due to the operation, regardless of a large driving force required via an air-fuel ratio kept rich. CONSTITUTION:When a power operation detecting means 3 detects that the load of an internal combustion engine 2...

PURPOSE:To lessen the occurrence frequency of torque shocks to a a vehicle driver. CONSTITUTION:Regarding an internal combustion engine equipped with an automatic transmission 20 having a lockup mechanism 23, an NOx absorbent 18 is provided in an engine exhaust passage for absorbing NOx, when the air-fuel ratio of incoming exhaust gas is lean, and for releasing the absorbed NOx, when the air-fuel ...

PURPOSE:To reduce the increase in the fluctuation of driving torque by prohibiting operation at a rich fuel-air ratio for regenerating an NOx absorbent during the power-on down shift operation of an automatic transmission. CONSTITUTION:An NOx absorbent 18 is laid in an engine exhaust passage 17 and an engine is normally operated at a lean air-fuel ratio, thereby causing the absorbent 18 to absorb ...

PURPOSE:To provide an electromagnet-type differential limiting device equipped with a pilot clutch, easy in assembling work, and excellent in responsiveness. CONSTITUTION:In an electromagnet type differential limiting device, a pilot clutch 7 is connected by axial movement of an armature 8 that is attracted by an excited electromagnet 14, while a main clutch 1 is connected by thrust (force) induce...

PURPOSE:To provide a cheap oil pump cover having simple construction so as to be easily manufactured. CONSTITUTION:A cover main body 17 is attached to an end part of a transmission case 11. This cover main body 17 is constituted of an Fe (ferro) material, and it consists of a cover part 19 and a boss part 20. A lubricating oil hole 21, through which lubricating oil flows, is made in the cover part...

Novel methods of decreasing the concentration of hydroxyl ions in an electrochemically generated alkaline peroxide aqueous solution consisting of partial neutralization of a stabilized solution of alkaline hydrogen peroxide, electrodialysis, and dialysis of an aqueous solution of alkaline hydrogen peroxide. The methods of the invention can be performed at ambient temperature and pressure.

A filtration system for water or other selected liquids that includes an ozone mixing station, a primary solids and gas separator and, if desired, a second vortex particle separator and filter system. The ozone mixing station includes a high efficiency ozone generator and a channel arrangement, such as a spiral tubular treatment coil, through which the ozone/liquid mixture passes to assure thoroug...

Water clarifying apparatus has a cylindrical tank where particulate contaminants suspended in raw water are separated using flotation techniques. A set of concentric mutually spaced, conical plates are positioned in the flotation tank. The plates rotate about the tank, preferably in unison with a (i) header that distributes equal quantities of raw water to each annular zone in the tank defined by ...

In a process for continuous melting of scrap, using shredded scrap in a shaft furnace (1), the shredded scrap is introduced above the melting zone via a lock, and the metal bath and the slag are taken to a refining process. The hot exit gases from the refining process are recycled, above the lock (10) for charging the shredded scrap, into a preheating shaft (11) for pure scrap, and the pure scrap ...

A yarn-working machine, especially an embroidery machine, is equipped with a yarn-joining device (11) which has a swirl chamber (12) having a compressed-air nozzle (13), in which two yarns (23, 24) of different colour which are used in succession are joined to one another as a result of the swirling of their filaments by means of compressed air. They are subsequently drawn out by the needle (7). ...