A wheel spin control apparatus for use in an automotive vehicle having left- and right-hand driven wheels includes spin detectors (SR,SL) for detecting the occurrence of an excessive wheel spin in the left- and right-hand driven wheels, and braking controllers (BCR,BCL) for applying braking forces to the left- and right-hand driven wheels in response to the detection of the excessive wheel spins t...

PURPOSE: To correct excessive range data by multiplying a convoluted signal to a calculated excessive range channel, adding the channel within the range thereto, and combining them together. CONSTITUTION: It is used that the gradient calculated by a gradient computer 72 generates a box-car kernel 75 in relation to the contribution of a patient. The box-car kernel 75 and an over-range mask 40 gener...

PURPOSE:To perform lateral seal of uniform width having width accurately correspondent to the width of a heat seal edge for a film for package of the traveling velocity not slower than some velocity. CONSTITUTION:A heat seal roll is equipped with two pieces of coupled rolls which are mutually approached, arranged in parallel, rotated and driven in the mutually reverse directions, built-in heaters ...

PURPOSE:To improve the traveling safety by reducing the engine output when the possibility of the contact with an obstacle is judged from the distance from the obstacle and the relative speed, operating a brake, releasing engine brake when slip is detected and applying brake only by a brake power. CONSTITUTION:A calculation unit 12 calculates the distance front an obstacle and the relative speed b...

PURPOSE:To improve safety and accelerate the restoration to the normal drive by automatically applying brake when the possibility of the contact with an obstacle is judged from the distance from the obstacle and the relative speed, turning OFF a clutch, and returning the clutch to an operation enabled state after the establishment of the returning condition after the application of a brake power. ...

PURPOSE: To provide a device for simplifying an operation for the non-stop operation of the automatic paper feeder of a sheet paper processor as much as possible. CONSTITUTION: This device is provided with a rake 8 having mutually parallel and horizontal lattice bars for temporarily acquiring the lower part of a residual sheet pile inside the pile chamber of the automatic paper feeder, a moving de...

PURPOSE:To improve the fuel consumption and drivability and suppress the internal noise or the like by shifting an engine to the low torque driving, generating a smaller torque, while transferring the gear ratio of an automatic transmission to the lower side, in the case where a torque variation in this internal combustion engine has become unfavorable. CONSTITUTION:An internal combustion engine t...

PURPOSE:To avoid a danger without fail as performing a vehicle's decelerating action gently and comfortably without feeling a sense of incompatibility by operating an engine brake and a hydraulic brake in combination according to the degree of risk at a time when the driver's be made contact with an obstacle. CONSTITUTION:An automatic braking control unit 49 drives and controls a brake pressure re...

PURPOSE:To prevent reduction of the torque to be transmitted accompanying the temperature rise of the hydraulic oil in a fluid coupling device which achieves the torque transmission by the hydraulic pressure caused according to the difference in the rotational speeds of two rotary shafts. CONSTITUTION:In a hydraulic coupling device, the rotational torque is transmitted between the first and the se...

Il trovato riguarda un dispositivo di posizionamento e bloccaggio del settore appoggia-gambe (18) ad inclinazione variabile di un lettino prendisole, comprendente dei mezzi di fermo (19) applicati al di sotto del settore appoggia-gambe, e dei mezzi di guida (20) applicati a ciascun piede d'appoggio (14) del lettino ed interagenti con detti mezzi di fermo così da bloccare il settore appoggia-gambe ...

In combination, a tracheostomy tube (100) including a curved cannula (20) lying substantially within a given plane and formed with a non-constant radius, and an obturator means (10) insertable into the cannula for guiding intubation of the tracheostomy tube into the cannula. The obturator comprises a single piece member formed of a resilient and flexible material and curvable upon insertion within...

PURPOSE:To improve the yield of high-octane gasoline base by aromatizing aliphatic hydrocarbons in the presence of a catalyst comprising hydrogen-type gallosilicates of specific crystalline gallosilicates. CONSTITUTION:Lightweight hydrocarbons containing 2-7C paraffins and/or olefins as the principal constituent is aromatized at 350-650 deg.C under a hydrogen partial pressure of 5kg/cm<2> or below...

PURPOSE: To improve the tire quality and extend the bladder life by eliminating a structural defect in a stress concentrating position in expansion and contraction of a shoulder bladder. CONSTITUTION: A cover rubber 18 of a bladder, a body fly 17, an inner rubber 16 and metal cords 13, 14 which are constituting elements of assembly parts are wrapped by a cord/rubber combined bodies 11, 12 to becom...

PURPOSE:To produce a fine polycarbodiimide powder having a narrow particle size distribution. CONSTITUTION:This production method comprises producing a solution of polycarbodiimide from an organic diisocyanate in the presence of a suitable catalyst, cooling the solution to convert it into a slurry, and spray-drying the slurry.

A silicone release film including an oriented polyester film having a coating thereon in an amount sufficient to act as a silicone release film. The aqueous coating comprises glycidoxy silane and an aqueous based thermosetting silicone release composition. The minimum amount of glycidoxy silane present in the coating is at least 1.0% by weight of the silicone solids. Typical glycidoxy silanes are ...

A power transmission shaft which transmits rotational energy of a flywheel is divided into a first shaft section adjacent to the flywheel and a second shaft section adjacent to a power take-off gear. A planetary gearing is arranged between the shaft sections and is adapted to be driven by a servo motor. A power take-off gear is mounted on an output section of the planetary gearing so as to transmi...

A power transmission shaft which transmits rotational energy of a flywheel is divided into a first shaft section adjacent to the flywheel and a second shaft section adjacent to a power take-off gear. A planetary gearing is arranged between the shaft sections and is adapted to be driven by a servo motor. A power take-off gear is mounted on an output section of the planetary gearing so as to transmi...

PURPOSE: To obtain an improved superabsorbent polymer having increased rate of water absorption by providing a monomer solution containing a monomer, a cross-linking agent and a carbonate blowing agent, adding a free radical initiator to the solution to form a micro-cellular aqueous gel of hydrogel polymer, finely chopping and drying. CONSTITUTION: A monomer solution containing monomers selected f...

PURPOSE:To produce a weather strip by making it possible to certainly and inexpensively applying urethane paint to the surface of a molded weather strip difficult to develop. CONSTITUTION:A rubber compd. prepared by adding 1-10 pts.wt. of polyglycidyl methacrylate having an epoxy group in its molecule to 100 pts.wt. of a rubber compd. constituted of SBR/EPDM is extruded from an extrusion molding m...

PURPOSE:To produce a bulky RE-Ba-Cu-O superconductor especially having 10mm size and excellent in superconductivity. CONSTITUTION:The raw powder contg. the RE, Ba and Cu components (RE is Y, Gd, Ho, Er or Yb) constituting an RE-Ba-Cu-O oxide superconductor is compacted to obtain a compact 1. At least one kind of the single crystal among SrTiO3, MgO, LaAlO3, LaGaO3, NdGaO3 and PrGaO3 as a seed crys...