PURPOSE:To remarkably remove the BOD in the waste liq. from the vacuum distillation of SHOCHU (strong alc. drinks), by charging the waste liq. with the pH controlled into a fermenter, and charging a pH regulating liq. when the pH in the fermenter increases to stably carry out the methane fermentation of the waste liq. CONSTITUTION:An agitator 4 is set in the fermenter 1 provided with an internal c...

PURPOSE:To prevent clogging with a hydrating agent discharging nozzle by a method wherein a partitioning plate having a multitude of small-diametral holes is arranged near the bottom of a cold heat accumulating tank to form an upper tank and a lower tank while a circulating line, supplying separated water extracted out of the upper tank and hydrating agent extracted out of the lower tank, is provi...

PURPOSE:To enable an easy operation of a control rod withdrawing device by setting a primary preset value of a withdrawal blocking derived from a relative value to an initial average value prior to the control rod withdrawal and by setting a secondary preset value as an upper limit value to an average value of a neutron detector. CONSTITUTION:One of signals of a gain regulating circuit 112a is fed...

PURPOSE:To enable utilizing a detector on the market and also a highly acculate detection without a preamplifier by arranging a plurality of rotation angle detectors so as to face against a rotor magnetic pole of which an axial length is longer than a motor stator, along a direction of an outer circle surface of a separating wall. CONSTITUTION:A plurality of rotor magnetic poles 10 are placed on a...

PURPOSE:To prevent damage of a neutron absorber rod due to corrision with lower and upper structural members at a reactor scram by fixing ends of the neutron absorber rods arranged in a sheath using a coil spring or the like. CONSTITUTION:An U shaped sheaths 12 are arranged crosswise and fixed to an tie rod 11 and then neutron absorber rods 3 are laid in the sheath 12. Upper and lower ends of the ...

This disclosure covers a caper for automotive disc brake systems. The caliper is provided with two coaxial pistons; one for normal braking, the other for emergency braking in the event of normal circuit failure or pressure loss.

In order to improve the downhill performance of a snow glider, it is proposed that its bindings be tiltable about its longitudinal axes, approximately transversely to the longitudinal axis of the slide board, against an elastic restoring force, out of a position of rest in both tilting directions.

A flowing medium (11) is arranged on a pipe (10), through which a medium (11) flows, with the aid of a connector (14). The connector (14) has two boreholes (17, 18) which lead to a pressure space (22), in which a pressure sensor (25) and a temperature sensor (26) are mounted on a diaphragm (24). One of the boreholes (17) of the connector (14) finishes approximately in alignment with the inside wal...

The invention relates to a process for the production of composite electrodes for electrochemical processes which are produced from a valve metal base and a coating, strongly adherent thereto, of platinum foil by high-temperature isostatic pressing of the base metal and the platinum foil between layers of release agent. The release agent which comes into contact with the platinum foil is a foil ma...

A distal end part of an endoscope which is provided at the distal end of the insert part of the endoscope, comprising an illuminating window through which illuminating light is emitted, a viewing window disposed side by side with the illuminating window to take a light image into an objective optical system, and a single transparent cover continuously covering the respective surfaces of the illumi...

A method and apparatus for implementing a thermodynamic cycle, which includes the use of a composite stream, having a higher content of a high-boiling component than a working stream, to provide heat needed to evaporate the working stream. After being superheated, the working stream is expanded in a turbine (102). Thereafter, the expanded stream is separated (131) into a spent stream and a withdra...

PURPOSE:To improve the resistance to a liquid leakage without lowering an electrical characteristic of an electrochemical device by adding a specific dibenzylidene sorbitol derivative. CONSTITUTION:A gelatinizer to be used is a dibenzylidene sorbitol derivative which contains at least one ester group -COOR as a nucleus substitution group (where R in the ester group represents a hydrocarbon group o...

A method of yarn end finding for a yarn end finding device which includes a contacting device for drawing out a yarn end from a bobbin by positively contacting the surface of a yarn layer thereof. It comprises operating the contacting device so that the contacting device does not act on bobbins passed through the yarn end finding device for the first time but acts on bobbins passed through the yar...

Apparatus composed of a control and monitoring unit 1, a thermostated cylinder 2 receiving a measured quantity of material to be evaluated, a plunger 3 sliding in the cylinder 2, an exchanger system enabling the cylinder 2 to be equipped with a suitable die 6 for the measurement to be carried out, a stepping-control motor 7 ensuring a monitored travel of the plunger 3, a force-sensor 9 yielding a ...

A motor vehicle pipeline (1) particularly resistant to alcoholic medium, consists of polyamide pipe (2) with an internal seamless coating (3), thin compared with the pipe wall thickness, consisting of a polyolefine bonded to the polyamide pipe in the course of co-extrusion. The thickness (D) of the pipe (2), which is preferably of polyamide 12, is 1.0 to 2.5 mm, while the thickness (d) of the coat...

A spread spectrum receiver is disclosed in which a correlation pulse generating circuit for generating a correlation pulse from a correlation spike outputted by a correlator comprises an A/D converting circuit which A/D-converts said correlation spike; an absolute value detecting circuit for detecting the absolute value of the output of said A/D converting circuit; a peak value detecting circuit f...

Sintering metal powder in inert and/or reducing atmospheres has been found to result in a hard porous metal structure without the use of sintering aids. The oxidation resistance of the structure can be enhanced by the firing process comprised of the following steps: oxidation, reduction, and then inert gas sintering.