PURPOSE:To shorten the time for pouring electrolyte by forming a sealed battery in which the spaces between pos. and neg. electrode plates and around a bunch of electrode plates with silica powder, pressurizing it and expanding, pouring electrolyte to the deformed part, and then putting the battery in decompressed state. CONSTITUTION:Electrode plates 1 in such a construction that glass separators ...

PURPOSE:To allow rear wheels to easily escape even when they are stuck in the mud, etc., by comparing a ratio of the absolute value of the difference between respective detection values of respective rotation speed sensors for detecting the rotation speeds of right and left rear wheels to the sum of respective detection values with a set characteristic value, thereby exactly detecting a slipped st...

PURPOSE:To prevent the turning abnormalities so as to reduce loads applied to brakes by controlling both of braking power applied to control wheels and driving power applied to driving wheels jointly when turning abnormalities due to excessive transversal slip of wheels are generated during the turn of a vehicle. CONSTITUTION:While a vehicle is driven, respective output signals from a steering ang...

PURPOSE:To uniformize the steam feeding quantity in each shaft without giving any large fluctuations to pressure in an auxiliary steam base pipe by installing a flow sensor, detecting the supply steam quantity at each shaft, and a measuring instrument detecting the full-open of an outflow valve as well as installing a general control unit inputting each signal of these elements. CONSTITUTION:Each ...

PURPOSE:To prevent distortion from occurring in the sealing process and to improve quality by temporarily sealing a light emitting body layer with an adhesive layer, sticking a sealing frame on its periphery section, and connecting and sealing the frame and a package film. CONSTITUTION:An adhesive layer 3a is provided on the sticking face side of the light emitting body layer 2 of a package film 3...

PURPOSE:To maintain the distance between the opposite surfaces of an upper and a lower glass substrate at a desired specific size value by mixing conductive particles which have the same diameter with glass fiber and the glass fiber with an adhesive and using the mixture as a paste material for electric connection. CONSTITUTION:The same glass fiber 5 as that used for a seal part 7 at the periphery...

PURPOSE:To easily enhance the tight contacting of a compensate electrode with a clear electrode, improve the vibration preventing effect, and simplify the manufacturing processes by connecting electrically the clear electrode with No.2 metal foil formed through an insulation on No.1 metal foil of a back electrode on a reflex insulative layer. CONSTITUTION:A clear electrode 2, light emitting layer ...

PURPOSE:To enhance the brightness and prolong the lifetime by forming an EL light emitting layer in multi-layer structure, and performing the drive for each light emitting layer. CONSTITUTION:Electrode leads 8A, 8B are connected with the two sides of a common electrode 7 obtained by forming clear electrodes 7b, 7c on both sides of a clear film 7a, and EL light emitting layers 1A. 1B are provided. ...

An improved method for producing hydrophobic polyolefin-containing staple fiber for processing, with reduced waste and improved crimp by sequential treatment with two finish compositions comprising at least one neutralized phosphoric acid ester and at least one polysiloxane of defined classes and amounts.

PURPOSE:To enhance the flexibility and bendability of the wire material as well as to reduce the size thereof, by providing an organic doner molecule layer onto the outer periphery of a conductor core wire and thereby doping acceptor molecules or ions to enable the preparing of the long wire material with any diameter from several millimicrons to several tens of millimicrons on continuous process ...

PURPOSE:To produce in continuous process steps an elongate light, highly flexible and highly bendable wire member by providing an organic superconductor core at a position located inside a conductor sheath when producing an organic superconductive wire member having a core/sheath structure of organic superconductor core/conductor sheath. CONSTITUTION:A wire member which is expressed by the formula...

PURPOSE:To obtain a superconductive member with a greatly increased critical current density by specifying the position of permanent-conductive substance layers in the superconductive member when arranging side by side the units each of superconductive substance layers and permanent-conductive substance layers laminated thereon in its longitudinal direction to provide a superconductive wire member...

A coating composition comprising a thermoplastic or thermosetting resin material containing a pigment composition. The pigment composition contains about 5 to about 90% iron oxide encapsulated mica particles. When used in a multi-coat coating process as a basecoat overcoated with a transparent overcoat, an article is produced which not only produces improved pearlescent color effects, but is stabl...

A single-component, visible light-curable liquid adhesive composition having a viscosity of less than 25 centipoise at 25 DEG C which comprises (a) 2 to 20 parts by weight of at least one substantially pure phosphate ester having the formula CH2=C(R<1>).CO.O.R<2>.OP(O)(OH)<2> in which R<1> is a hydrogen atom or a methyl group, and R<2> is -CH2-CH2-, -CH2-CH(CH3)- or -CH(CH3)-CH2- and (b) 98 to ...

The coil former (1) comprises two flanges (3) which are interconnected via a tubular central portion (5). At least one of the flanges (3) is provided with a number of recesses (7) in the form of right-angled slots comprising a first section (14) and a second section (16). The recesses (7) accommodate terminal pins (9) which are made of an electrically conductive wire and which comprise a first por...

A workstation controller (WSC) performance monitor for locating performance bottlenecks is disclosed. The user notifies the host that he wants to start performance measurements. The host notifies each of the workstation controllers to begin collecting data that can be used to determine processor performance and communications line performance for each workstation controller. This data is collected...

PCT No. PCT/DK83/00053 Sec. 371 Date Jan. 18, 1984 Sec. 102(e) Date Jan. 18, 1984 PCT Filed May 18, 1983 PCT Pub. No. WO83/03949 PCT Pub. Date Nov. 24, 1983.A two-part horseshoe consists of a channel-shaped upper part (10) to be nailed to the horse's hoof and an exchangeable lower part (20), which is made of an elastic material and has a ridge member (22) that can be pressed up into the channel (1...

PURPOSE:To prevent abnormal interruption due to pressure rise by a method wherein a plurality of outdoor units provided in the vertical direction are piled so that a diffuser side passage unit part and a suction side passage unit part correspond to each other with an upper surface and a lower surface of a casing sandwiched. CONSTITUTION:With respect to outdoor units A1 and A2 which are an upper an...

PURPOSE:To attain the input of a touched part as a touch point without deteriorating the operability of a touch panel input device even in a state where a touch panel is touched with fingers by providing an input pen which generates the light in the conditions set previously, a touch panel main body, and a light receiving part. CONSTITUTION:An input pen 1 is provided together with a touch panel ma...