PROBLEM TO BE SOLVED: To provide a battery capable of enhancing input output characteristics and cycle characteristics.

SOLUTION: The battery has a positive electrode 21, a negative electrode 22, and an electrolyte, and a separator 23 interposed between the positive electrode 21 and the negative electrode 23 is impregnated with the electrolyte. In the negative electrode 22, (1) a specific s...

PROBLEM TO BE SOLVED: To realize an excellent charge/discharge cycle with high stability and high capacity, even in case a nonaqueous electrolyte secondary battery is used with a high charging voltage of ≥4.25 V.

SOLUTION: On at least a part of a surface of a complex oxide particle with an average composition expressed in a chemical formula 1: Li(1+x)Co(1-y)MyO(2-z)

PROBLEM TO BE SOLVED: To provide a relay connector in which a probe 54 is made to butt with a terminal 38a of an inspection object side connector 38.

SOLUTION: A floating guide 26 is arranged in a free moving to draw near or part with a pin-block 24 and is energized elastically in a parting direction. A guide hole 26b is dug on the floating guide 26 on the side of pin-block 24 for positioni...

PROBLEM TO BE SOLVED: To provide a metallization film capacitor exhibiting good current resistance while suppressing individual variation in current resistance.

SOLUTION: In the metallization film capacitor, a metal thin film of at least one layer is formed on one side of a dielectric film and processed to have a corrugation at the opposite side end portions for forming a metallicon electro...

PROBLEM TO BE SOLVED: To suppress the occurrence of beats in an inductor component having a bobbin.

SOLUTION: The component includes: a core 7 having a back leg 7D and legs 7A, 7B (7C) nearly vertically provided in the back leg 7D; a core 8 connected to the legs 7A, 7B (7C) magnetically; and the bobbin 10 inserted into the leg 7A. On a surface opposite to the core 8 in the leg 7A, an adhesi...

PROBLEM TO BE SOLVED: To provide a method for manufacturing a multilayer substrate which decreases the stress acting on electronic components, embedded in the multilayer substrate and can suppress the electronic components from receiving damages.

SOLUTION: The height A of an electronic component 30 is smaller than the thickness B of a resin film 11c, formed with a through hole 15 for insert...

PROBLEM TO BE SOLVED: To prevent generation of spiking phenomena, when outputting a laser beam in a pulse form.

SOLUTION: A period when a laser output is turned off is set so that a threshold current value Ih or higher for making a semiconductor laser output a laser beam, and the drive currents of a current value Is, which is less than an oscillation current value Io for making a fixed lase...

PROBLEM TO BE SOLVED: To provide an image forming apparatus which has increased effect of an EMI countermeasure and improved work efficiency.

SOLUTION: An image reader 20 of an electrophotographic copying machine is arranged at an upper part of an image output device 10 via a gap. A shield harness 40 has a swelling part 41 at its center part and the image output device 10 and the image read...

PROBLEM TO BE SOLVED: To highly precisely calibrate a printer without performing a complicated arithmetic operation or the like.

SOLUTION: A chart CA for scanner in which the respective color reference images of yellow (Y), magenta (M), cyan (C), black (K), orange (OR), green are formed is read as a color image of red (R), green (G), blue (B) with the scanner 10, scanner compensation LUTs o...

PROBLEM TO BE SOLVED: To dissolve inconvenience that a user has to pay attention to an event in which a camera is installed in a cradle, a data fetch completion event from a digital camera and a charge completion event of the camera installed on the cradle by himself/herself since the events are not considered in the conventional manner.

SOLUTION: This camera cradle is provided with an even...

PROBLEM TO BE SOLVED: To accomplish an A/D conversion circuit capable of preventing the occurrence of offset voltage caused by a change speed of an input signal of a comparator.

SOLUTION: An A/D conversion circuit is configured by cascading a plurality of stages each including a comparator converting an analog input signal into a digital input signal, a D/A converter converting again an out...

PROBLEM TO BE SOLVED: To provide a device for, controlling polarization orthogonalization in which the states of polarization directions of adjacent channels are detected, and the polarization directions of the adjacent channels are controlled so that the polarization directions are orthogonal to each other.

SOLUTION: A light signal multiplexed by an optical multiplexer 3 is split by an opt...

PROBLEM TO BE SOLVED: To provide a geared motor and a motor that prevents a radial load applied to an output shaft from causing deformation of the output shaft.

SOLUTION: A reinforcement cylinder 80, which reinforces a driven radial output shaft 16, is provided around the driven radial output shaft 16, to which the driving force of a stepping motor 14 is transmitted. Also, a stepped reinfor...

PROBLEM TO BE SOLVED: To make an induced voltage constant variable while suppressing the increase of energy loss.

SOLUTION: An axial gap type motor comprises a rotor and a pair of stators which are counterposed to catch the rotor from both sides of a rotating shaft. The rotor comprises a plurality of main permanent magnets 21a which are arranged in its circumferential direction so that the ...

PROBLEM TO BE SOLVED: To make disconnection hard to occur in a coil assembly while a coil assembly is lightened.

SOLUTION: The coil assembly 44 of a power generation mechanism 20 of a power generation hub 10 is provided with a coil part 51 and a connection part 52. The coil part has a bending part 51a and is made from an aluminum wire material. The connection part is electrically connected ...

PROBLEM TO BE SOLVED: To provide a pruning machine capable of improving durability with a simple structure while retaining cutting quality of a pruning blade.

SOLUTION: This pruning machine (1) has reciprocating a pair of blades (10 and 12) having a plurality of pruning blades (8) relatively along the longitudinal direction (A1). The external parts (10b and 12b) of the pair of the blades (1...

PROBLEM TO BE SOLVED: To provide a mower tractor, an oil cooler of which is cooled in good efficiency.

SOLUTION: The mower tractor 101 (201) includes a hydraulic stepless transmission arranged in a traveling system, an oil cooler 170 (270) for cooling a hydraulic oil circulating in the hydraulic stepless transmission, a mower 119 (219), and a duct 122 (222) in which cut grass cut by the mow...

PROBLEM TO BE SOLVED: To achieve reduction in radiation exposure during imaging taking a relatively long imaging time for both purposes of blood vessel form observation and cardiac muscle perfusion, for example.

SOLUTION: The X-ray diagnosis apparatus is provided with an X-ray source 2 to generate pulse X-rays, an X-ray detector 5 to detect the X-ray beam which has penetrated a sample, an i...

PROBLEM TO BE SOLVED: To provide a cleaning machine using hot water capable of preventing destruction of its boiler can or the like caused by a pressure drop caused by a decrease in water supply during a cleaning work or by unexpected suspension of water supply to its closed type boiler.

SOLUTION: The cleaning machine using hot water comprised of a closed type boiler 2 directly connected to...

PROBLEM TO BE SOLVED: To provide a coating method for forming a coating film having excellent initial drying property, film forming property, durability and adhesiveness on a base material having an organic coating film.

SOLUTION: In the coating method, a water base paint containing (A) a synthetic resin emulsion having a reactive functional group, (B) a solvent having ≥7.5 (cal/cm3