A continuous marine pipe laying system utilizes two rollers to overbend and straighten pipe as it is unwound from a reel. A support arm is pivotally connected to the axis of rotation of said reel and first and second roller arms are pivotally connected to the support arm at a point spaced from said axis of rotation. During use, the first roller is positioned at a point adjacent the pipe substantia...

PURPOSE:To accomplish perfect four-wheel limited differentiation, in an arrangement which is equipped with a double differential device to provide differentiated rotation between the left front axle and right rear axle and between the right front axle and left rear axle, by driving the planet carrier of this double differential device with rotation of a transfer gear. CONSTITUTION:An outer front s...

PURPOSE:To have good turning performance and maneuvering compatibly stability, in an arrangement of rear-wheel drive type equipped with wheel clutches in which the transmitted torques to the left and right wheels are changed, by performing proper control of the wheel clutches in accordance with the result from sensing of the change in steering angle at the time of cornering. CONSTITUTION:In a rear...

PURPOSE:To select either automatic or manual shifting according to the driver's taste by furnishing a clutch pedal on a car equipped with an automatic transmission, disengaging the clutch by depressing of this pedal, and providing possibility of shifting the gearing position from a select lever. CONSTITUTION:At normal times a select lever 14 is set in the drive range, a select lever signal Ss and ...

PURPOSE:To promote a decrease in cost by having a dual port random access memory, accessible from both sides, built in either of the computers for controlling an engine and an automatic transmission, and writing the common control information into this memory in process by the engine controlling computer. CONSTITUTION:A dual port random access memory 4, accessible from respective central processin...

Fibrous thermal insulation comprises an intimate blend of A) non-graphitic carbonized fibers having an LOI value greater than 40, a percentage char value greater than 65, and a thermal conductivity less than 1.7 W/(m.K) (1.7 W/m.C)), and B) hollow thermoplastic fibers.

Fibrous thermal insulation comprises an intimate blend of A) non-graphitic carbonized fibers having an LOI value greater than 40, a percentage char value greater than 65, and a thermal conductivity less than 1.7 W/(m.K) (1.7 W/m.C)), and B) hollow thermoplastic fibers.

A process for the treatment of organic fall-out products with separation of noxious matter, in particular heavy metals, wherein the organic fall-out products are submitted to an aerobic pretreatment, subsequently to a treatment for disintegrating the cells and wherein the valuable and noxious substances contained in said cells, laid bare by said disintegrating treatment, are separated and the noxi...

The compounds have antifungicidal and antimicrobial activity and are used in medicine. They are selected among a group of azole derivatives having the general formula (formula) where their substitute have the respective meanings. The invention is also related to pharmaceutically acceptable acid-adjoint salts and stereochemical isomer forms of the compounds.

Bodies of slaughtered animals are automatically cut into pieces using a turntable with positioning units for the bodies of parts of them. Means are included to determine the position on the body, while mechanisms mounted in a circle round the turntable cut through the body in the positioning unit. Each of these units has two or more parts whose height is opt. adjustable. There can be three such ...

Films comprising alpha-olefin polymers, such as polypropylene consisting essentially of recurring propylene units and having a substantial crystalline polypropylene content, and in particular isotactic polypropylene, are rendered poorly adhesive to the welding bars of automatic and semi-automatic machines conventionally used for the manufacture of containers, envelopes, bags, vessels and, in gener...

PURPOSE: To use a device as a desensitizer also by magnetizing a ferromagnetic matter with one magnetic polarity at the time of putting it on one face and magnetizing it with the opposite magnetic polarity at the time of putting it on another face and concentrating lines of external magnetic induction to a part near a gap. CONSTITUTION: A conductor 43 is electromagnetically coupled to a core 40 an...

PURPOSE: To enhance the load collapse preventive effect in a load chamber space behind the rear seat of a vehicle by furnishing the rear seat with two back cushions independently foldable and pivoting each back cushion component rotatably on a frame supported rotatably on the body. CONSTITUTION: The seat bottom 2 and back cushions 5 of the rear seat 1 of a vehicle are composed each of two componen...

PURPOSE:To obtain a function to extract an operator's operation such as key input, etc., by providing a means to execute a program corresponding to each operation of an operator, and a means to extract the information of each input operation performed by the operator and to store it in a data file after encoding when the program is executed. CONSTITUTION:An input operation judging part 12 detects ...

In a method of manufacturing a glazing panel comprising sheets which are joined together along the margin of the panel using heat-activatable bonding medium (e.g. solder) which is electrically conductive and/or in contact with electrically conductive material and which is activated in situ by induction heating, the induction heating is performed using an inductor 65 powered by an aperiodic generat...

In the injection moulding of hollow products, product material which forms the finished article is injection moulded around a removeable core corresponding to the hollow. One single injection moulding tool is configured for alternate moulding of core material and product material in one or more successive steps, each step including two part-stages. In one part-stage, core material is injected into...

Solid particles or viscous liquid droplets of core material (27) are encapsulated in a coating material (21) largely as single particles with a single coherent coating, by feeding a suspension of the two materials onto a rotating surface (13). The suspension is centrifugally dispersed by the rotating surface into relative large coated particles (27, 27a) and relatively small droplets (21a) of coat...

Disposable suction bag for secretions extracted by suction from a patient, which comprises a part in the form of a bag 2 manufactured from a flexible plastic film and whose mouth is fitted with a lid 6 for the connection of suction tubes. The lid may be placed in the opening of a non-deformable container 5 so that the said suction bag 2 terminates at the top inside the container 5. At the bottom o...

A process for preparing dermatan sulphate (DS) of pharmaceutical purity from animal organs rich in mucopolysaccharides (MPS), by: (a) stabilizing the fresh organs by freezing them either as such or in the form of powder, (b) micronizing the material containing the MPS with an aqueous CaCl2 solution, (c) digesting the homogenate comprising the raw material and the CaCl2 with proteolytic enzymes at ...