PURPOSE:To settle a driving wheel slip quickly as well as to secure the stable driving in brining a high traction capacity into full play by performing such compound operations as a driving force reduction by throttle control and a braking force impartation by brake control at a time when lateral acceleration is small at time of rectilinear driving or the like. CONSTITUTION:In the case where a car...

PURPOSE:To provide a transmission mechanism unit which can be easily operation-connected with the revolution equipment as driven device and develop the performance of a small-sized dc motor having a limitted capacity to the max. degree. CONSTITUTION:A planetary gear device P operation-connected with a small-sized dc motor is built in a cylindrical housing 3 on which the motor is fixed in demountab...

PURPOSE:To fill paste of active material uniformly at a high density in the grid of a support body using a simple meachanism by providing a small diameter applying shaft having a cross sectional surface of an irregular form in a middle position between a pair of filling rollers and a doctor blade. CONSTITUTION:Paste active material 9 is filled by filling rollers 3, 4 rotating at the center part of...

PURPOSE:To make a construction which makes changeover from 4-wheel drive to 2-wheel drive or vice versa unnecessary, by providing a rear side drive shaft with two differential gears and providing each of said differential gears with a regulating means which regulates the rotating speed of a shaft extended to a left or a right wheel. CONSTITUTION:A front side drive shaft 14 is provided with 1st dif...

PURPOSE:To effectively prevent an engine from stopping, by detecting the increasing speed of control force of a brake in order to determine that the operation of brake falls in a panic brake condition when the detected increasing speed exceeds a set value, thereby a clutch is rapidly disengaged. CONSTITUTION:During a vehicle running, when a brake pedal 12 is depressed, and an air-pressure switch S...

A tool which is composed of a steel material such as piano wire and brought into contact or rubbing relation with the yarn when the machine is operated, for example, knitting and sewing elements such as a knitting needle (1), sewing needle (5), and guide piece (22) of the ground guide block, or weaving elements such as the stainless steel reed (51) and heddle (60) of the water jet loom; and coated...

Beschrieben wird eine Akkumulatoren-Batterie (10) für Kraftfahrzeuge, insbesondere Bleiakkumulatoren-Batterie, in Blockbauweise, die sich aus einem ersten, dem Startvorgang des Kraftfahrzeugs dienenden Bereich (11) und einem zweiten, der Zündung, der Beleuchtung und anderen Verbrauchern des Kraftfahrzeugs dienenden Bereich (12) zusammensetzt. Der erste Bereich (11) und der zweite Bereich (12), die...

This invention provides liquid ion exchangers suitable for use in solvent extraction, as well as novel organic acids which exhibit utility for this purpose. Illustrative of inventive organic acids are compounds corresponding to the formula: where R1 and/or R2 is a C2-C11 linear alkyl group and, when employed as a liquid ion exchanger, R1 and/or R2 is preferably a C3-C16 branched alkyl group...

Die Zerkleinerungsmaschine weist eine mit einzelnen Messern versehene Walze (4) auf, wobei die einzelnen Messer vorzugsweise in einer oder in mehreren Schraubenlinien angeordnet sind. Diese Messer arbeiten nicht wie üblich mit einem Gegenmesser und einem Abstreifer sondern mit drei Gegenmessern (7, 8, 9) zusammen, die eine zu den Messern komplementäre Form haben, so dass sie mit den Messern zusamm...

The yarn (1) is wound onto a cross-wound package (4) by means of a grooved drum (3), and a first sensor (6) is provided for determining the circumferential speed of a member rotating synchronously at the speed of the traversing yarn. A second sensor (7) determines the position of the yarn (1) on the package (4) in relation to the longitudinal axis thereof, and a correction factor is derived from t...

A vehicle control apparatus and method therefor has a number of controllers (50, 63, 56) interconnected with one another by a data highway (10), the engine controllers being formed for example by a CPU. The engine controllers are each connected to a sensor for sensing a vehicle parameter and the controllers are also connected to a respective actuator (53, 58) for varying the associated vehicle par...

To remove the thread waste (11) on a yarn carrier (7), the latter is clamped in a loading station (A) of the device between a take-up cone (6) and a pressing cone (8) arranged on a carriage (3) which slides to and fro on a carriage guide (1). During this movement, the yarn carrier (7) first passes through a cutting station (B) in which the thread waste (11) on the yarn carrier (7) is cut by blades...

The paper stapling machine has a pressure beam (13) to hold the paper during stapling or cutting. It is attached to a chain (16) driven by an electric motor (30) through an e.m. clutch (25) and gears (22,23). When the required holding pressure is reached, the clutch slips. The speed detector (33) on the output shaft detects the lack of motion and a control signal is sent to the motor to deactivate...

An accumulator battery (10) for motor vehicles is described, especially a lead-acid accumulator battery, of block construction, which is composed of a first region (11), which is used for the process of starting the motor vehicle, and a second region (12), which is used for ignition, illumination and other loads in the motor vehicle. The first region (11) and the second region (12), which preferab...

A cardboard blank is cut from a continuous strip of thin cardboard by passing the strip between two rollers (10,11). The roller (10) is provided with a cutting edge (17) corresponding to the shape of the blank and the cardboard is pressed against the reaction roller (11) during the cutting operation. The pressure on the cutting roller (10) is maintained by a compression spring (36) which acts...

PURPOSE:To offer the fitting device for the LCD which can select an assembly system with good operability while improving the fitting operability of the LCD by securely positioning a protection sheet for LCD fitting on a bracket for LCD fitting. CONSTITUTION:The bracket 1 for LCD fitting has engagement holes 18 in a frame-shaped part 2, where the LCD 9 can be stored, on the side of a stopper part ...

PURPOSE:To reduce the occupation area of a bus correction line and mechanically and chemically protect the bus correction line. CONSTITUTION:Liquid crystal is charged between a TFT substrate 10 and an opposite substrate 30, which are isolated and arranged at a specific interval by a seal part 40. The correction line 16 for correcting disconnection trouble of drain buses 12a-12n, and 13a-13n is for...

PURPOSE:To improve the brightness and the reliability of a thin film electroluminescence element. CONSTITUTION:In forming a layer of sulfur compound to become a light emitting layer 7, sulfur is supplied separately to form a layer of the sulfur compound layer including sulfur excessively, and a heat process is also performed while sulfur is supplied, so that stoichiometry for the light emitting la...

PURPOSE: To develop composite structures which prevent displacement and damages of fibers during compression and coalescence, keep the fibers spaced apart, and bring optimum distribution of the fibers. CONSTITUTION: A metal or ceramic foil (aluminum, titanium, aluminides or the like) has a groove 12 wherein a fiber reinforcement 16 (carbon, boron, silicon carbide or the like) is deposited. Also in...