FIELD: engineering investigations in building, particularly devices for determining deformation and strength properties of ground in well. ^ SUBSTANCE: device comprises probe (working tip), control-rod, pipeline, communication line, loading jig and measuring station. Probe includes hollow cylindrical body with bottom and cap filled with working liquid, elastic shell sealed from body bottom and top...

FIELD: oil and gas extractive industry. ^ SUBSTANCE: method includes performing a test pumping of liquid waste into absorbing well before operational pumping, while changing flow step-by-step. From equation of absorption base hydrodynamic parameters are determined for calculation of predicted coefficients of operation characteristics of absorbing well and reserve well. During operational pumping o...

FIELD: geophysics. ^ SUBSTANCE: method includes lowering protective container to the well to portion of intensive curvature of shaft, which container is fixed at end of drilling pipes, lowering of geophysical device into protective container on lower portion of logging cable, delivery of protective container with geophysical device to pit-face by consecutive extending of drilling pipes column, low...

FIELD: oil extractive industry. ^ SUBSTANCE: mixture is separated on liquid and gas in separator. Liquid is periodically collected and forced away by gas while measuring absolute pressure and gas temperature in separator tank near upper and lower fixed liquid levels, and times of forcing away of fixed liquid volume. Additionally measured are absolute pressure and temperature in moment when liquid ...

FIELD: formation of payment documents. ^ SUBSTANCE: the information meaningful for the payment document is introduced in the computer of the financial settlements and check-out center, the payment document is formed in the form a text and the first dot-and-dash code line and introduced in the electronic data base, the document is displayed for payment to the payer, the payer introduces the informa...

FIELD: electrical engineering; power supplied to borehole loads. ^ SUBSTANCE: proposed generator is characterized in that radial-axial bearing disposed at end of post on one end of stator is built of two bearings, one axial and one radial bearings, with flexible member inserted between part of frame and outer ring of one of these bearings, that additional radial bearing is installed on post at oth...

FIELD: packing equipment, particularly means for forming sleeves of flexible tapes of packing material in vertical weighing-and-packing machines in food, chemical and other industries. ^ SUBSTANCE: device has forming tube with chamfered inlet end and guiding assembly for packing tape folding. Guiding assembly is made as a roller and two guides. ^ EFFECT: reduced force necessary to extend packing t...

FIELD: electric engineering. ^ SUBSTANCE: system has refueling device on its front end, hollow between outer rotor and stator filled with oiling liquid, and compensator of pressure and temperature expansion of oiling liquid placed on the side of generator fixing device made in form of piston mounted inside the rotor with possible axial displacement, and compaction mounted in its turn inside piston...

An engine start control system includes a starter (27) and a motor generator (7) capable of starting an engine (1). The engine start control system further includes a controller (26) that determines the rotational resistance of the crankshaft (3) based on cooling water temperature of the engine (1) or viscosity of the engine oil, and then selects the starting mode of the engine(1) by the starter (...

A release liner which includes a metal layer with a release agent attached to a side of the metal layer. The release agent is exposed to releasably receive an article. The metal layer has a thickness sufficient to prevent a laser from penetrating through the metal layer as the article, attached to liner, is laser cut.

An automatic speed control device for a vehicle includes a distance measuring sensor (3), a vehicle speed sensor (5) and a control unit (9) for controlling the vehicle speed. In the control unit (9), a target speed determining section (11) determines a target speed corresponding to a distance detected by the distance measuring sensor (3) and the vehicle speed detected by the vehicle speed sensor (...

A vertical pillow type form-fill-seal packaging machine (10) with transverse sealers (40) incorporates a timing controller (50) for adjusting the timing for clamping a tubularly formed film with the sealers such that articles being dropped in to be packaged will not be caught in between. A display device (54) displays a time axis or parallel axes along which markers indicate the times of arrival o...

Der elektromechanische Ventilantrieb weist einen Elektromagneten (72, 73, 74); eine Aufnahme (42, 44) für einen Elektromagneten; und ein Verguss-Material (50) auf, das den Elektromagneten (72, 73, 74) mit der Aufnahme (42, 44) für einen Elektromagneten verbindet. Die Vorrichtung zum Vergießen von elektromechanischen Ventilantrieben hat eine Gussform (110) mit einer Kavität, um eine Elektromagnet-B...

The flexible loadbearing components (17) of the auxiliary pile holder (16) are made to yield to externally acting positioning forces. The loadbearing components are placed underneath the auxiliary pile (11).; Die Erfindung betrifft eine Vorrichtung zum Aufnehmen eines Hilfsstapels während des Erneuerns eines Hauptstapels bei der Zufuhr von Bogen zu einer drucktechnischen Maschine. Die Erfindung be...

Eine Dialysevorrichtung (1) umfasst eine Wasserversorgungsdurchführung (15) zum Zuführen von Reinwasser an die Lösungsversorgungskammern (35a und 35b) und eine Altlösungsdurchführung (17) zum Ausgeben einer Altdialyselösung aus den Lösungssammelkammern (34a und 34b), wobei die Wasserversorgungsdurchführung eine Lösungskonzentratpumpe (21), die eine Dialysekonzentratlösung von einer Lösungskonzentr...

Um eine Trennblatt-Spendevorrichtung für Schnittgutscheiben und insbesondere für Lebensmittelaufschnitt, umfassend einen Halter für Trennmaterial, eine Schneideinrichtung zur Herstellung von Trennblättern und eine Transporteinrichtung mit mindestens einer drehbaren Transportwalze zum Transportieren von bahnförmigem Trennmaterial, so zu verbessern, daß diese sich auf einfache Weise in Verbindung mi...

The shredding roller blades (4,5) shaft (3) is driven by one or two motors (2) whose rotational speed is controlled by a frequency converter (8) regulated by a control unit (7) and sensor data lines (10) from the motors and material data (9).; Die Erfindung betrifft eine Zerkleinerungsvorrichtung für Abfälle und/oder Produktionsreste. DOLLAR A Um bei einer solchen Zerkleinerung die Gefahr von Schä...

The instrument (1) may have two parallel measurement paths (2a,2b) each with an optical fiber (5a,5b) input (3a,3b). Each path has an inlet coupling point (6a,6b) with an optical fiber near a first biconvex lens (7a,7b). The two light paths then pass through a diffraction grating (8). Selected diffracted light beams are passed through biconvex lenses (9a,9b) which focus them onto the coupling poi...