A liquid fuel injection system incorporates an injector pump (10) for delivering prescribed quantities of a principal liquid fuel (e.g. diesel oil) under pressure to individual injectors (21) for cylinders of an engine (6) and comprises an electronic control unit (7), an electrically controllable variable flow regulator (1) arranged to receive a combustible alternative fuel (e.g. a gas such as CNG...

PURPOSE:To make it possible to set a control amount of a switchback running as desired, by setting data to compute a negative acceleration to the pressing angle of an accelerator pedal at different values respectively for different driving conditions, and controlling the clutch depending on an adequately selected data. CONSTITUTION:An automatic transmission 3 connected to the engine 1 of a fork li...

PURPOSE:To improve operational performance, by making the following running a driver is going to drive to be detected depending on whether the next forward or backward lever shifting is set or not in a preset specific time when the forward/backward shift gear is converted to the neutral position in a running. CONSTITUTION:An automatic transmission 3 connected to the engine 1 of a fork lift through...

PURPOSE:To realize a smooth deceleration, by presetting a negative acceleration to the pressing angle of an accelerator pedal, and controlling a clutch depending on the difference between the preset negative acceleration and the actual negative acceleration, when the automatic transmission is converted from a running direction to the reverse direction. CONSTITUTION:An automatic transmission 3 conn...

A twisting machine for twisting several filament yarn strands which are preferably an aramid (aromatic polyamide) and wound on spools, has a creel for supporting the spools, a delivery system which includes several feed rollers, and a first thread guide which is supported before the delivery system along the strand paths for movement back and forth in directions parallel to the axes of the deliver...

A method and apparatus for use at the stage of a radial tire building process at which a tread and breaker, and sidewall rubbers, are added to the expanded carcass. A tread assembly is built, comprising tread rubber breaker and sidewall rubbers and is then located around the carcass which is then expanded into the tread assembly. A tread assembly former has a central portion expansible to bring si...

A port cap for attachment to an inlet or an outlet port of a device, especially a medical device such as a cardiotomy reservoir, venous reservoir, blood oxygenator or blood dialyzer. The port cap comprises a hollow body member having a wall at its first end, a second end which is open, and a hollow interior. The closed end of the body member carries a hollow projection having a first end which is ...

DISPOSITIF DE CIRCUIT CARACTERISE EN CE QUE LES DISPOSITIFS D'ALIMENTATION EN TENSION POUR LA TENSION DE FONCTIONNEMENT DU MICROCALCULATEUR MC ET LA TENSION DE L'ENTREE DE SELECTION DE PUCES CSA DE LA MEMOIRE A SEMI-CONDUCTEURS CMOS-RAM SONT PREVUS DE FACON QU'EN CAS D'UNE DEFAILLANCE OU EN CAS D'UN DEBRANCHEMENT A UN INSTANT T DE LA SOURCE DE TENSION U, LA CHUTE TEMPORAIRE RELATIVE DE LA TENSI...

Rubber compositions and articles such as tires having improved metal adhesion and metal adhesion retention to metallic reinforcement including brass-plated and zinc-plated steel cord. The improvement comprises admixing from about 0.25 to about 15.0 parts per hundred rubber (phr) of a cobalt or nickel salt and from about 1.0 to about 12.5 phr of an amine-modified, non-heat reactive alkylphenol-form...

A gradiomanometer 1 measures the difference in pressure between points 3 and 4 to indicate density and hence proportions of two phases (e.g. liquid and gas), each of known density flowing as indicated by arrow 6. A venturi meter 2 measures the difference in pressure between points 4 and 5 to indicate flow rate, initially assumed to be that of the heavier phase only. An iterative calculation makes ...

It is often desirable to meter multiphase fluid flow in pipes (e.g. bore holes). In order to obtain reliable/accurate flow rate measurements it is known to incorporate obstructions in the flow path to cause homogenization. A non-obstructive method of homogenizing the flow of a multiphase mixture of fluids in a bore hole comprises providing in the bore hole a pipe section which has an internal surf...

A method of grinding a workpiece (24) which is susceptible to deflection and/or deformation when grinding is carried out by relatively infeeding a grinding wheel (20) to keep the wheel face and work surface in relative rubbing contact at an interface region, the method comprising continuously determining the force exerted by the wheel (20) on the workpiece (24) at the interface region as grinding ...

PURPOSE:To constitute the titled film so that excellent blocking resistance is displayed through loading of a small quantity of spherical particulates and that transparency and strength do not substantially deteriorate, by combining use of the specific spherical particulates to polyolefin with specific orientation treatment to the same. CONSTITUTION:The titled film contains condensation type resin...

A new process for producing allyl ethers, usually C8-30 alkyl (CH2CH20)5-100 allyl ether, by forming a solution of an alcohol, usually a surfactant alcohol, in a solvent capable of forming an azeotrope with water, azeotroping the mixture to remove substantially all the water, adding an alkalimetal alkoxide, usually sodium methoxide, removing the alkanol formed, usually by azeotroping with the solv...

A glass fiber reinforced flexible composite material is obtained by dispersing or embedding glass fiber in a fluororesin, which is a graft copolymer obtained by grafting a crystalline fluoro-polymer to an elastomeric fluoro-polymer. For example, the graft copolymer is obtained by graft polymerization of vinylidene fluoride with an elastomeric copolymer of vinylidene fluoride, chlorotrifluoroethyle...

Smooth, glossy, thin films based on linear polyethylene with Mw > 4 X 10<5>, preferably above 8 x 10<5>, having a strength above 1 GPa, a modulus above 20 GPa, and a FEM value above 150 KJ/m, and having a thickness of below 25 mu m, preferably below 2 mu m, an opacity below 15% and a water vapour transmission value below 0.6. Such films can be prepared by spinning or extruding a semidiluted solu...

UN FILM EST ETIRE LONGITUDINALEMENT PUIS TRANSVERSALEMENT.

L'ETIRAGE LONGITUDINAL EST ASSURE ENTRE DES ROULEAUX AYANT DES VITESSES DIFFERENTES, A UN RYTHME D'AU MOINS 10000 MN, ET SOUS UN RAPPORT D'ETIRAGE DE 2,7 A 3,5. A UNE TEMPERATURE T1 DE 45 A 60C ET EN UN TEMPS T E(3,9-0,053 T (E BASE DES LOG.), LE FILM EST TRANSFERE A L'ETIRAGE TRANSVERSAL QUI, JUSQU'A UN RAPPORT D'ETIRAGE DE 1,4...

The invention relates to a procedure for applying an anti-theft device on goods, and ink/dye/paint for use therewith. The ink to be applied on the goods is mixed with magnetizable particles, said particles being magnetized, and demagnetization being effect upon payment or leaving the premises. An alarm signal is emitted if a marked article which has not been demagnetized, is taken out.

Azolyl-tetrahydrofuran-2-ylidene-methanes of the formula (I) in which A represents a nitrogen atom or the CH group; X represents oxygen, sulphur or the SO or SO2 group; R represents optionally substituted aryl; R1 and R6 are identical or different and represent hydrogen, alkyl, halogenoalkyl or halogen, a maximum of up to 3 substituents representing halogen or halogenoalkyl, with the p...

A visual information processing apparatus which processes image data produced by a TV camera to detect the change in image with the lapse of time. The visual information processing apparatus comprises a circuit which generates the data of coordinates X and Y that represent a scanning position on the image, a memory for storing a plurality of microprograms, a control circuit which addresses an init...