The constructional component is formed as a plate (1A-1D) and/or casing (1), and forms part of a construction (2), e.g. a security protection cabinet. It contains plaster has main constituent. - A further principal part of the component is boric acid.

An automotive driving control system comprises a stepless transmission provided between the engine and the driving wheels, a transmission controller for controlling the transmission ratio of the stepless transmission, a throttle valve driver for driving the throttle valve of the engine, an operating state detector for detecting a particular operating state of the engine such as "knock" or resonanc...

PURPOSE:To prevent a torque shock at the time of a torque converter operation by reducing the engine speed synchronously with the torque converter operation and controlling a speed shifting ratio control device so as to maintain the engine output to be constant. CONSTITUTION:A control means 25 is fed with outputs from an acceleration pedal sensor 16, a brake pedal position sensor 18, a coolant tem...

PURPOSE:To improve the engine cooling performance to solve an overheating without generating a torque shock in case an overheating takes place by changing the speed shifting ratio and throttle valve opening along an isopower curve. CONSTITUTION:A control means 25 is inputted with signals from an acceleration pedal position sensor 16, a brake pedal position sensor 18, a coolant temperature sensor 2...

PURPOSE:To improve the stable operating property of an engine when the engine is cold by changing the set value of revolving number of the engine to a high revolution side when the engine is cold. CONSTITUTION:Outputs of an accelerator position sensor 16, a brake position sensor 18, a water temperature sensor 20, an engine revolving number sensor 21, a throttle position sensor 23 and an airflow me...

PURPOSE:To improve the stable operating property of the engine when the engine is green by changing the revolving number of the engine to a high revolution side to restrict leakage of compression of suction air as much as possible when the engine is green. CONSTITUTION:Outputs of an accelerator position sensor 16, a brake position sensor 18, a running distance integrating meter 20, an engine revol...

PURPOSE:To secure a good combustion stability by changing the set value of opening degree of a throttle valve to a low opening degree side to increase the flow speed of suction air and promote the atomization of fuel when an engine is cold. CONSTITUTION:Outputs of an accelerator position sensor 16, a brake position sensor 18, a water temperature sensor 20, an engine revolving number sensor 21, a t...

PURPOSE:To secure reliability of an engine when the engine is green by a method wherein the output of the engine, which is corresponding to the treading amount of an acceleration pedal, is decreased than the same under the lapping of the engine to lighten thermal load for the engine when the engine is green still. CONSTITUTION:Outputs of an accelerator position sensor 16, a brake position sensor 1...

An automotive driving control system comprises a stepless transmission provided between the engine and the driving wheels, a transmission control for controlling the transmission ratio of the stepless transmission, a throttle valve driver for driving the throttle valve of the engine, an accelerator position sensor for detecting the amount of depression of the accelerator pedal, and a control for c...

PURPOSE:To make plates while preventing any scattering of a harmful powder during the manufacturing by fixing a water repellent or hydrophobic substance to the periphery of a plate-like current collector installed in a container and supplying a given amount of a slurry-like dispersion of an active material over the current collector. CONSTITUTION:After 75wt% of lead monoxide, 25wt% of trilead tetr...

PURPOSE:To prevent idle running of tires in turning and improve the running limit, response of steering, and driving stability by predicting the load on each wheel according to the cross acceleration predicted and positively controlling the drive force rate of a right wheels and left wheels. CONSTITUTION:A four wheel drive car is not provided with a differential gear, and the right and left front ...

PURPOSE:To obtain a double differential gear for a small diameter and light constant four wheel drive gear by using four internal gears with 2 sets composed of 3 planetary gears rotated in these 4 gears while being interlocked thus performing differential rotation. CONSTITUTION:A front small planetary gear 5 and front medium planetary gear 6, which are interlocked through a ring-like shaft 4, are ...

PURPOSE:To quickly and certainly cancel automatic running control when abnormality occurs and improve reliability by judging that abnormality occurs when the grip of a driver of a vehicle keeps a given threshold or more in a given time and outputting automatic running control cancellation command when abnormality occurs. CONSTITUTION:A plurality of grip sensors 10 are provided at the steering whee...

An electrochemical storage device comprises an electrolyte which forms an ignitable gas under certain conditions during use. The electrochemical storage device is constituted by a tank and a lid which is joined in a liquid-tight manner thereto and in which the terminal pillars are brought out at the top. Furthermore, it has a labyrinth-type pressure equalization connection built into the lid to co...

An insulating coating of a desired portion of an electric cable is removed by selectively irradiating the desired portion with a pulse laser beam having a pulse width of 5 mu sec or less and a peak output of 1 MW or more.

An insulating coating of a desired portion of an electric cable is removed by selectively irradiating the desired portion with a pulse laser beam having a pulse width of 5 mu sec or less and a peak output of 1 MW or more.

Web, drawn intermittently from roll A, e.g. by packaging apparatus D, is formed into a U-shape in suction device C, which includes a loop sensor 3a controlling a device i which feeds web to device C. The vertical extent of the U-shape is thus kept constant and web tension downstream of device G is controlled. Device C comprises a rectangular-section, open-topped box, suction being applied at port ...

A cutting head for fabrics for the clothing industry, includes a body (4) which can move in a direction which is substantially parallel to the plane of arrangement of the products to be cut and supports a cutting blade (8) which oscillates transversely with respect to the plane; the head has electromagnetic means (A, B) which act directly on the blade to cause its controlled oscillation.

In the case of the process according to the invention for cutting an adhesive plastic material, particularly an adhesive strip, the cutting is performed contactlessly by means of a cutting medium in the form of a jet or beam, expediently by means of a fluid jet, in particular by means of a concentrated, thin fluid jet under high pressure and preferably by means of an air jet of about 0.15 mm diame...