The housing and the shaft structure of a hydraulic motor are in a known manner provided with brake discs (3,4) which are actuated by a movable part (10) which is spring-loaded (16 or 17) on one side and subjected to a hydraulic pressure on the other side. The pressure chamber (8) is further defined by a part (9) stationarily secured on a shaft (2). The parts (9, 10) are reversible as can be seen f...

The livestock building manure scraper system consists of reciprocating rods (7) with scrapers (11), set lengthwise in the manure channels. The rods have ratchet pawls a which interact with ratchet mechanisms in the scrapers to convert the rods' reciprocating motion into a lengthwise movement of the scrapers which is reversed at the ends of the channels. - The reciprocating motion of the rods is pr...

A master station communicates with the main network, whilst a set of mobile or fixed sub stations of voice or data users share the channel using time division multiplexing. The number of time division channels available depends on the quality of the transmission links, power and modulation index. The rate of errors is detected to maintain a specified condition of operation. When all available chan...

A master station communicates with the main network, whilst a set of mobile or fixed sub stations of voice or data users share the channel using time division multiplexing. The number of time division channels available depends on the quality of the transmission links, power and modulation index. The rate of errors is detected to maintain a specified condition of operation. When all available chan...

A master station communicates with the main network, whilst a set of mobile or fixed sub stations of voice or data users share the channel using time division multiplexing. The number of time division channels available depends on the quality of the transmission links, power and modulation index. The rate of errors is detected to maintain a specified condition of operation. When all available chan...

A master station communicates with the main network, whilst a set of mobile or fixed sub stations of voice or data users share the channel using time division multiplexing. The number of time division channels available depends on the quality of the transmission links, power and modulation index. The rate of errors is detected to maintain a specified condition of operation. When all available chan...

3-Aryluracil derivs. of formula (I) and their salts where R1 and/or R2 = H are new: R1 = H; 1-4C alkyl; 2-4C alkenyl or alkynyl; 2-6C alkoxyalkyl, alkanoyl or alkoxycarbonyl or formyl; R2 = H; 1-6C alkyl; 2-4C alkenyl or alkynyl; or 2-6C alkoxyalkyl; R3 = halo or NO2; R4 = H or halo; R5 = H, halo, 1-4C alkyl, ClCH2, BrCH2, HOCH2, 1-5C (alkoxy or alkylthio) methyl, CN, NO2 or thiocyanato; R6 = H or...

3-Aryluracil derivs. of formula (I) and their salts where R1 and/or R2 = H are new: R1 = H; 1-4C alkyl; 2-4C alkenyl or alkynyl; 2-6C alkoxyalkyl, alkanoyl or alkoxycarbonyl or formyl; R2 = H; 1-6C alkyl; 2-4C alkenyl or alkynyl; or 2-6C alkoxyalkyl; R3 = halo or NO2; R4 = H or halo; R5 = H, halo, 1-4C alkyl, ClCH2, BrCH2, HOCH2, 1-5C (alkoxy or alkylthio) methyl, CN, NO2 or thiocyanato; R6 = H or...

To prevent the drawn-out tube being pushed together again when the packing container wall is penetrated, the tube has a lock lug (4). The lug, by mechanical engagement, maintains the two parts (1,2) of the tube in the drawn-out position.

The lower part of the pipe is pressed to form two tracks bent longitudinally, and to enclose the ends formed with bends of a flat iron or round stirrup (1) inserted into the pipe. After the pipe has been driven into the ground to the required depth, taking the stirrup with it under the force of strokes imparted by an iron bar inserted into the pipe, the stirrup arms (2) are rounded outwards below ...

The body (5) of the support is positionable across the lumbar region of the back of a person. It has an effective support surface along the height extension of the air container. The air container (5) can be fixed in the area where the support is needed, and the remainder of the support consist of a belt (14), fixable across the abdomen of the wearer at its two ends by self-adhesive (16,17) strips...

With the coloured filters inserted in sequence between the light source and the eye of an observer, the colour may be determined by an exclusion process. Red (21) and green (22) filters are used. - The red filter is applied to a lens (41), whilst the green filter is fitted to a second lend (42) of a pair of binoculars (5). The filters are located in a cylindrical casing one side of which is provid...

The support (4) can be fixed with the aid of a stop screw (7) in required length and rotation positions on the turning tool shaft. - When it is held against a stop, the angle position for the cut in relation to the workpiece is defined by the angle of the support on the shaft of the turning tool.

At the opposite end (3) to the hand grip (2), the lower arm (1) of the can opener has one or more counterpieces (11), and apart from the pressure plate (9) at one end, the upper arm (7) which is for lifting has one or more lifting components (12) at its other end. The upper arm (7) is rotatably fitted to a lever component (4), and the counterpiece(s) (11) is/are arranged with the lifting component...

Container for fluids is formed from folding side panels which can be erected to produce a tube pref. with a square cross-section. The ends of the tube are closed by hinged triangular panels which are attached to adjacent side panels. The folding allows the container to be compressed flat or to be erected into an expanded, liq. tight condition. Pref. the container panels are amade from a polyolefin...

The side surfaces of the spacer or intermediary layer have a shape differing from a flat surface at right-angles to its width sides. At least two, and pref. three such intermediary layers are prepared at the same time by milling of the edges and of a track in a plate. The plate has a thickness which is at least of the same dimension as that of the intermediary layer, and a width which is at least ...

The side plates extend in width outside the rivet union of the chain and inside the lateral cut (19a) of the cutting teeth. Radially, the side plates extend as closely as possible below the profile of the cutting teeth.