A medical system has an X-ray apparatus with an X-ray system having an X-ray source and an X-ray receiver, and a therapy unit with a source of focused acoustic waves, the therapy unit being detachably coupleable to the X-ray apparatus. A method for coupling the therapy unit to the X-ray apparatus is also disclosed. The coupling is performed so that after the therapy unit has been coupled to the X-...

PROBLEM TO BE SOLVED: To partly alter a rigidity of a rubber of a pneumatic tire. SOLUTION: A pipeline 42 is embedded near a width direction outside of a tread forming surface in an upside mold 18 and a lower side mold 20. Cooling water is circulated in the pipeline 42. The molds 18, 20 are heated to a predetermined temperature by an upper side platen and a lower side platen, and the water is circ...

PROBLEM TO BE SOLVED: To attain compactness of a reduction gear and improvement of durability, in an electric vehicle having a motor with a rotational speed and rotational direction variable and the reduction gear. SOLUTION: A reduction gear 3 reducing a rotational speed of a motor 2 is constituted by an input shaft 30 connected to a motor output shaft 2b, output shaft 40 arranged rearward on the ...

PROBLEM TO BE SOLVED: To reduce the amount of swinging caused by the rolling of the axle case of a relay fulcrum by providing the relay fulcrum in a mechanism for linking a switching mechanism with a differential locking operation tool and locating this relay fulcrum near the rolling axial core position of the axle case. SOLUTION: A supporting boss 11B is erected in the vicinity of the flange part...

PROBLEM TO BE SOLVED: To provide a wide range adjusting torque distribution ratio, simplify a structure, lighten weight in small size, decrease an energy loss, and enhance interchangeability of a member. SOLUTION: This device comprises a differential case 3 driven to rotate by an engine, a pair of output members 35, 37 connected to a wheel side, differential gear mechanism 53 arranged respectively...

PROBLEM TO BE SOLVED: To reduce a cost, further without causing enlargement in size of a device, so that a sufficient amount of drive force can be adjusted in good responsiveness, relating to the drive force adjusting device for a vehicle. SOLUTION: In a drive force adjusting device for a vehicle having a differential mechanism 1, two drive shafts 11, 12 inputted with drive force from an engine th...

PROBLEM TO BE SOLVED: To eliminate shocks when an interrupter is turned on by controlling a motor mechanically connected to an internal combustion engine when the turning-on of the interrupter is determined so as to set the rotational speed of the internal combustion engine to a target rotational speed and turning on the internal combustion engine when the same is rotated at a target rotational sp...

PROBLEM TO BE SOLVED: To attain improvement of running stability by performing a proper fail-safe process possible in accordance with a condition of abnormality, in an attitude control device for a vehicle controlling its turn attitude so as to be converged in a target running direction by distributing brake force given to each front/rear right/left wheel also decreasing an engine output. SOLUTION...

PROBLEM TO BE SOLVED: To obtain excellent sealability and improve balance in an entire form by performing drop and rise following drop and rise movement of a lateral sealer while a tip side of a filling nozzle is inserted in a packaging film and also by always taking timing for filling a material to be packaged by a filling means immediately above a lateral seal. SOLUTION: Vertical movement is per...

PROBLEM TO BE SOLVED: To provide a high speed winding device which can wind a filament material without stopping essentially, by automatically transferring the filament material from one rotary winding mandrel to the other nonrotary winding mandrel. SOLUTION: This device is a traverse guide mechanism to wind a filament material to a rotary mandrel, and its has a dividing means having a crank arm 4...

PROBLEM TO BE SOLVED: To provide a trans-axle which is miniaturized in the direction of the axle and which can easily be assembled. SOLUTION: This trans-axle 10 is provided with an epicyclic gear unit and a differential 12, both of which are shift mechanism, so that it (10) transmits the input torque from an input shaft 13 to the differential 12 via the unit. An epicyclic gear of the unit is forme...

PROBLEM TO BE SOLVED: To attain high output without sacrificing service life performance by allowing a separator having a specific maximum pore diameter combed mainly from acid-proof fiber to abut to a positive electrode plate and a separator having a specific maximum pore diameter mainly combed from silicon dioxide to abut to a negative electrode plate. SOLUTION: In a retainer type sealed lead-ac...

PROBLEM TO BE SOLVED: To provide a lead-acid battery which uses expanded grid and has superior life characteristics. SOLUTION: A grid bore part 1 and a crossing part 2 of the grid bone part 1 have the same thickness and are formed in the form of a wave as a whole as shown in the cross section. When this is used in an electrode plate as a current collector, the crossing part 2 is positioned in the ...

PROBLEM TO BE SOLVED: To provide a superior highly efficient discharge cycle characteristic by setting the measure square area of a negative electrode lattice body, using a pole plate by filling an active material in a current collector composed of a lattice body which is smaller than the measure square area of a positive electrode lattice body. SOLUTION: A measure square area of a negative electr...

PROBLEM TO BE SOLVED: To provide superior output characteristics and a highly efficient discharge cycle service life characteristic by enlarging a twist of a lattice bone of a negative electrode lattice body more than a lattice bone of a positive electrode lattice body, by the use of an expanded lattice body by working a belt-like material composed of lead or a lead alloy, as a current collector. ...

13 A throttle controller is provided so as to reduce a load imposed on the drive and transmission system in the stall state in which both the accelerator and bra ke are depressed. The controller comprises a throttle control section for calculating a degree of opening of the throttle for generating a driving force in accordance w ith the actual degree of depression of the accelerator used as a targ...

11 A throttle controller having a throttle control section is provided so as to eliminate any inconsistency in the degree of opening of the throttle at the time of mode switching, and to obtain a superior driving efficiency. In the driving mode, the throttle control section (1) calculates the degree of opening of the throttle for generat ing a target driving force calculated based on a plurality o...

An automatic steering control apparatus automatically steers a motor vehicle to run along a predetermined running path having path markers. The path markers are detected with a marker sensor on the motor vehicle, and positional relationships between a present position of the motor vehicle and the running path are successively determined based on a detected output signal from the marker sensor. Pos...

A binding holds a ski boot in a releasable manner to a ski or the like. A jaw (3) is pivotally mounted on a body (2) around a transverse axle (4), such that it is rotatably movable from a closed position to an open position and vice versa. The jaw (3) is held in a closed position by a biasing system. The binding also includes a loosening lever (11) pivotally movable around the transverse axle (4),...

A catheter assembly (2) includes a catheter shaft (6) having a tip portion (10) with a hollow interior (30) and a linear ablation electrode (18, 34, 36, 44, 58) spaced apart from the distal end (22) of the tip portion. The electrode has an inner surface (28) which is effectively fluidly exposed to the hollow interior so that a cooling fluid (32) passing through the interior contacts the inner surf...