PURPOSE:To eliminate the connection delay of a clutch which is automatically operated in association with a change lever by the use of a negative pressure in an intake manifold of an engine by compensating an increase in the clutch connection speed irrespective of any change in the negative pressure within the intake manifold. CONSTITUTION:The friction clutch 2 coupled with a fluid joint 1 is auto...

Steam, for example, is produced from aqueous brine, by a system that employs preferably hot waste fluid, and nozzle means and rotary separator means generally of a known kind per se. The method steps include transferring the waste heat of combustion source (22) to the brine flowing in heater exchanger coil (23), expanding the hot brine through nozzle means (24) to form a jet of steam and liquid dr...

Procedure and device for cutting pieces of material to order, from a band of material, by using a cutting table equipped with a vacuum installation for holding the band of material in place and a workable, longitudinal and traverse slide on the cutting table, running along the desired cutting lines, which is controlled by a data processor for marking and data control, as the carrier of a cutting t...

PURPOSE:To improve remarkably the productivity of solidified matter in a rotary water spraying method by forming a trumpet-shaped expanding part to the aperture edge of a drum and discharging continuously cooling liquid and the solidified matter. CONSTITUTION:The drum 10 in a case 5 is rotated by driving of a driving motor 1 and the cooling liquid such as water is supplied through a supply pipe 12...

PURPOSE:To manufacture a superconductive wire contg. Ti added Nb3Sn at a low cost by extruding a composite body consisting of a Cu alloy having a specified composition contg. Sn and Ti and of Nb or an Nb alloy having a specified composition at a proper temp. and a high extrusion ratio. CONSTITUTION:A composite body consisting of a Cu alloy contg. 1-15atom% Sn and 0.1-8% Ti and of Nb or an Nb alloy...

PURPOSE:To accelerate the restart of an arithmetic pipeline by switching the timing of a certain arithmetic pipeline to that of another pipeline in case the first pipeline has a waiting state. CONSTITUTION:If the data invalid is produced when the vector loading is carried out with a slot K, the operation of an arithmetic pipeline under execution with a slot E3 is discontinued. Meanwhile a slot cou...

PURPOSE:To obtain an overall sensor by disposing a radio wave sensor, IR light sensor and visible light sensor at the lens focuses of the respective wavelength light on the axial line within the window part of lens-shaped ZnS. CONSTITUTION:The window 1 formed by molding the ZnS subjected to a homoganization treatment to a lens shape is fixed to the end on a casing 9 and the axial line the window i...

PURPOSE:To prevent the occurrence of air bubbles in a scattering cell to prevent the occurrence of harmful scattered light by providing a pressure adjusting valve in a sample in take and connecting a flow rate adjusting valve to the exit side of the scattering cell provided in the terminal of a flow path. CONSTITUTION:The washing water taken in from a sample intake 1 has the pressure reduced to a ...

PURPOSE:To prevent drop of luminous quantity by providing a non-flash type getter within an exhaust pipe. CONSTITUTION:A non-flash type getter 4 is provided within an exhaust pipe 3. A silver-titanium alloy film 41 is formed at the front surface of a nickel substrate 40 and simultaneously a getter film 42 of zirconium-aluminum alloy is formed at the rear surface. The getter film 42 works as a non-...

PURPOSE:To improve discharge performance by filling a mixture of graphite having a specified particle size and lead powder having a specified apparent density. CONSTITUTION:1wt% each of graphite (particle size is 100-1,200mum) having large anisotropy is added to each of five kinds of lead powder having different apparent density and comprising about 75% PbO and the balance Pb, and they are mixed a...

A honeycomb tabletop for use with either a vibration isolation system or a rigid support stand. The tabletop has an upper skin, a lower skin, a connecting side wall, and a honeycomb core. Additional stiffening members and structural damping treatment may also, independently, be incorporated within the honeycomb core. The upper skin of the table has a plurality of tapped holes for mounting equipmen...