PURPOSE:To surely avoid occurrence of malfunction of sales control by effectively preventing remarkable reduction in a voltage level when a motor for carrying merchandise is started without causing cost increase in the battery-driven automatic vending machine. CONSTITUTION:The vending machine is provided with a sales available display lamp 6, a merchandise selection button 8, a merchandise carryin...

PURPOSE: To provide a maintenance-free lead-acid battery having a satisfactory life period in relatively a high temperature environment by continuously manufacturing a positive plate from a direct cast alloy strip having the specified composition through the specified processes. CONSTITUTION: An alloy practically made of lead, containing about 0.02-0.05 wt.% Ca, about 0.3-0.5 wt.% Sn, and about 0....

PURPOSE:To provide a battery with slight capacity decrease and having a long life by installing a pressing means in an electrolytic bath and pressing a group of electrode plates in the plane direction. CONSTITUTION:An upper and a lower holding projected parts 12, 13 are unitedly projected inward in both side walls 21 of an electrolytic bath main body 2, wherein the side walls face to both edge par...

PURPOSE:To secure the pressure resistant strength at the end part of a casing film and to enhance the hermetical closing property of a package, by tying up the bundled part of the end part of the cylindrical casing tube by a metal clip and sealing the casing film at the tied-up part by welding. CONSTITUTION:The edge part of a casing film 1 molded into a cylindrical shape is welded to form a seal l...

PURPOSE:To provide a vertical sealing device for a vertical bag-making filling/ packaging machine, which can perform heater temperature control appropriately, perform fine adjustment coping with types of webs or feeding speeds, perform butt-seam center sealing favorably by feeding a web continuously, reduce noise and vibration of the machine drastically, and perform high speed packaging. CONSTITUT...

PURPOSE:To positively avoid being biten of falling articles to be packaged during high speed running by a side heater, by providing a scraping bar box motion to do a box motion repeating lowering, closing faster than the side heater. CONSTITUTION:When side heaters 2a, 2b are opened, scraping bars 6a, 6b are opened not to contact articles to be packaged dropping in a packing cylinder H to pass thro...

PURPOSE:To make possible to increase the size of a side gear as large as possible within a limited space, by supporting a differential gear carrier only to one shaft section of the side gear on the front axle driving side. CONSTITUTION:A differential gear carrier 41 is cantilever-likely supported between a side gear 42 on the front axle driving side and the mount casing 32 of a rear wheel drive ri...

A power transmission device for a full-time four wheel drive vehicle has a differential motion limiting device composed of a hydraulic frictional clutch such as a wet multiple disc type clutch. The friction clutch is disposed between a diff-carrier constituting a front wheel differential gear and a ring gear mount casing covering the diff-carrier and arranged coaxially with the diff-carrier. The r...

Coatings, which act as barrier layers to inhibit migration of alkali metal ions from a glass surface and/or act as colour suppressing underlayers for overlying infra-red reflecting or electrically conducting layers, are deposited by pyrolysis of a gaseous mixture of a silane, an unsaturated hydrocarbon and carbon dioxide on a hot glass surface at a temperature of 600 DEG C to 750 DEG C.

PURPOSE:To maintain stable rotation of a power take-off shaft by enabling an electronic governor provided to a fuel injection pump to be set in an all speed mode if a power is extracted by power take-off when a transmission is in a neutral condition. CONSTITUTION:An automatic transmission A is coupled to a Diesel-engine D having a fuel injection pump C provided with an electronic governor B, and i...

PURPOSE:To make clutch not to be set in engagement even if any failure occurs in an electric power supply by making an electromagnetic valve for starting a normally closed type. CONSTITUTION:An automatic clutch device 4 has four electromagnetic valves 14-17 and a double check valve 18, and electromagnetic valves 14-16 are of a normally closed type and the electromagnetic valve 17 is of a normally ...

PURPOSE:To make a vehicle adapt to a driver's linking, a traveling mode, and a road condition, by permitting a driver to arbitrarily select a traveling pattern between a pattern attaching importance to fuel consumption and that attaching importance to motive power performance. CONSTITUTION:A calculation unit 48 calculates a speed change based on an actual speed change ratio calculated by a calcula...

PURPOSE:To provide a normal operation of a system by a method wherein foreign items flowing from a gas flowing pipe and a liquid flowing pipe into an accumulator are caught by a filter and water content contained in a heat transferring system is adsorbed in a dryer arranged in the liquid flowing pipe. CONSTITUTION:A filter 8a is arranged in a path of a gas flowing pipe 5, and a filter 8b, a dryer ...

PURPOSE:To reduce the installation space and cost for equipment and installations by providing a first heat exchanger in which heat is exchanged between hot thermal medium heated by collected heat and transported feed water as well as a second heat exchanger which generates steam for processing by heating the feed water with the operating medium. CONSTITUTION:Thermal medium 15 heated to the set te...

A hydraulic control apparatus is employed in a stepless transmission in which an endless belt is stretched between and wrapped around a pair of pulleys and the velocity ratio between input and output shafts is changed by varying the width of a groove defined in each of the pulleys. Hydraulic pressure supplied from a hydraulic pressure supply source is reduced to necessary levels by first and secon...

PURPOSE:To check any shock at the time of speed change operation, by interlocking the speed change operation of an auxiliary control valve, releasing a hydraulic feed system for a main gear shifter in the point midway in this speed change operation, and closing it at a time when auxiliary speed change operation is over. CONSTITUTION:In an interval between a high speed position and a low speed posi...

PURPOSE:To absorb the dispersion of an individual vehicle and the change through the lapse of time by correcting the standard operation quantity to the direction for reducing the output of an integrator, through the learning control, in a PID operating means for correcting the difference between the actual value of the engine revolution speed and an aimed value. CONSTITUTION:A PID operating means ...

PURPOSE:To enable the selection of an optimum gear change range depending upon a traffic condition by establishing a limit range capable of setting an upper limit value for a shift mechanism to operate toward a speed increase and the upper limit position at the speed increase side to be changed when the mechanism is shifted to said limit range. CONSTITUTION:When a limit rang is 'a' selected for li...

PURPOSE:To obtain the title apparatus able to be easily assembled and having excellent lateral weight balance, by using a driving unit composed of a supporting shaft, a bevel gear and a pair of right and left bearing supports and engaging the bevel gear with a bevel pinion from the right and left directions. CONSTITUTION:A driving unit 8 is composed of a supporting shaft 10, a bevel gear 11 and a ...