PURPOSE:To prevent abrasion flaws from being formed on the outer periphery of a roller of a bearing owing to the movement of input and output shafts to a thrust direction by designing the connection structure of the connecting side ends of the respective shafts in a transmission in which the input and output shafts are coaxially disposed through a needle bearing. CONSTITUTION:An engaging recessed ...

PURPOSE:To prevent the occurrence of hunting of speed change control due to fluctuation of a car speed signal caused by the operation of a traction control device. CONSTITUTION:The rotating speeds of four wheels are respectively detected by wheel speed sensors 18, 20, 22, 24, and the car speed depending on a signal showing the minimum rotating speed among the signals detected by the sensors is use...

PURPOSE:To improve the fuel consumption efficiency and the starting performance and responsiveness of a vehicle by providing a control unit for controlling the ratio solenoid duty to be determined according to the lower limit value obtained by switching plural target engine rotating speed lower limit value maps depending on the action stepping on an accelerator pedal. CONSTITUTION:A speed change c...

PURPOSE:To improve the start feeling by providing a control means for setting and controlling the limiting line of engine rotating speed determined at the time of adjusting the change gear ratio in a start mode to transit to a drive mode to be biased to the target engine rotating speed side. CONSTITUTION:A speed change control device 76 of a continuously variable transmission 2 for a vehicle is ad...

PURPOSE: To conduct accurate length measurement of a fiber material which is to be wound in relation with a pressurizing device which acts on a beam winding body with a small pressure at winding, by improving a length measurement device for a threadlike fiber material which is wound on a winding beam as thread group. CONSTITUTION: A movement distance pick-up 14 provided at a pressurizing device 13...

Skiving equipment which is labour saving and which also permits the skiving work to be carried out to a predetermined extent includes a rotating member 6 for rotating a buffed tyre about an axis while supporting the tyre; a camera 41 for photographing a belt portion of the tyre; a camera controller 44 for analyzing skiving conditions, including a skiving position, from a photographed image obtaine...

A dispenser for dispensing sterile solution which includes a valve means to control the dispensing of the sterile solution from a container. The valve means comprises a solution outlet means, and an air inlet opening having associated therewith a filter membrane to filter the air passing into the container. When dispensing solution force is applied to the container in order to achieve this, and th...

A rotating disc filter has a plurality of discs, each made of a plurality of sectors removably mounted on support structures which are fixed on a rotating hollow shaft into core drainage channels of which, the sectors drain. The drainage and support structure has flow channels designed to rapidly drain filtrate and to permit filtrate split between clear and fiber bearing fractions. Rapid drainage ...

Particle patterns formed on a conical bottom surface of wells formed in a microplate are photoelectrically detected to produce a two-dimensional image signal, and then the two-dimensional image signal is processed to judge or classify the particle patterns as agglutinated patterns, non-agglutinated patterns or uncertained patterns with the aid of the two-dimensional image processing. An image sign...

The use of a liquid for the preparation of a rigid polyurethane and/or polyisocyanurate foam by reacting a polyisocyanate and a polyol in the presence of a blowing agent characterized in that the liquid is an inert, insoluble, non-blowing liquid. CFC-free foams may be obtained showing good insulating properties.

An arc plasma torch having a tapered-bore electrode provides a long, columnar plasma arc. The torch includes a torch housing, a tapered-bore electrode, a gas-constricting nozzle, and a swirling gas flow generator. The electrode is mounted within the housing and has a closed inner end and an open outer mouth. The electrode has a longitudinally extending, tapered bore. The bore has its largest dimen...

PCT No. PCT/JP88/00994 Sec. 371 Date May 29, 1990 Sec. 102(e) Date May 29, 1990 PCT Filed Sep. 29, 1988 PCT Pub. No. WO89/03077 PCT Pub. Date Apr. 6, 1989.An automatic travelling system for use in combination with a construction vehicle is disclosed. The automatic travelling system for use with a construction vehicle comprises a plurality of guide lines serving as a main traveling path device for ...

Apparatus is provided for inspecting powder material and for removing the foreign matter therefrom. A rotary table is provided to receive powder material to be inspected on its surface. A feeder supplies the powder material onto the surface of the table aligned in a single layer and a photosensing system detects the foreign matter. The foreign matter is removed by a suction device. Thereafter, the...

PURPOSE:To coat fine particles with a highly viscous substance without using a solvent by charging fine particles in a multi-shaft stirrer crossing the rotary surface formed by a plurality of specific stirring blades. CONSTITUTION:In order to coat the surfaces of fine particles with a particle size of 3mum or less and apparent density of about 0.20g/cm<2> or less with a highly viscous substance wi...

PURPOSE: To strengthen the adhesion of the cover layer to the core by positioning the polyurethane core so that the gap against the inner wall of a mold is 0.5 mm and filling a reaction mixture consisting of a polyisocyanate component and a polyol component into the gap. CONSTITUTION: The surface of the polyuyethane core A is positioned so as to make the average gap against the inner wall of a mol...

PURPOSE:To provide a device to transfer and deposit tire beads with a filler deposited on an efficiently workable separator on to a tire forming machine. CONSTITUTION:Arms 21, each having a vacuum pad 20 for holding a separator by suction are arranged on the external periphery surface of a center block 10 installed on a bracket 14 in a freely rocking manner, and a semiarc-shaped guide groove 22 is...

A process for the production of composite bodies of polyurethane foams and covering layers, which includes at least partly lining a mold with a covering layer, and filling the mold with a reaction mixture which reacts to form a polyurethane foam. The reaction mixture which forms a polyurethane foam consists of a polyisocyanate component, a component consisting of at least one organic compound havi...

The invention relates to films of linear polyester containing glass spheres having a certain particle size distribution and in a certain amount. The addition of the glass spheres improves, inter alia, the dynamic coefficient of friction of the film. Preferably, a second film additive, fumed silica, of a controlled particle size distribution and weight is added to the film. The addition of the fume...

PURPOSE:To obtain the subject organic thin-film electroluminescent element having a strong luminous intensity at a practical level of high durability by providing one or more layers containing an organic polycyclic compound. CONSTITUTION:The objective electroluminescent element is obtained by providing one or more layers containing a compound of formula II, III, etc., having 1 to 2 condensed rings...

PURPOSE: To facilitate handling of a device and increase reliability in operations by a method wherein a monitor device for monitoring a web tensile stress is made a pressure detector. CONSTITUTION: In a web processor comprising a monitor device for monitoring a web tensile stress and transmitting signals when the tensile stress is decreased, in particular, a web supply printing machine web damage...